• 한국환경과학회지
• /
• 제20권8호
• /
• pp.1011-1019
• /
• 2011

The objective of this research is to evaluate optimal conditions of permeability and selectivity on the polysulfone membrane for efficiency of separation of $CH_4$ by checking four factors which are temperature, pressure, gas compositions and gas flow rates. When higher pressure was applied at the input, lower efficiency of recovery of $CH_4$ and higher efficiency of separation of $CH_4$ were shown. It has the tendency to show lower efficiency of recovery of $CH_4$ and higher efficiency of separation of $CH_4$ at the output as higher temperature at input. The lower flow rates make higher efficiency of recovery of $CH_4$ and lower efficiency of separation of $CH_4$. Finally, over 90% efficiency for $CH_4$ separation and recovery conditions are temperature ($-5^{\circ}C$), pressure (8 bar), gas composition rate (6:4) ($CH_4:CO_2$) and gas flow rate ($5\ell$/min). These conditions make higher separation and recovery efficiency such as 90.1% and 92.1%, respectively.

• 멤브레인
• /
• 제23권3호
• /
• pp.189-203
• /
• 2013

과불화질소, 육불화황, 삼불화질소와 같은 불소를 포함한 불화가스는 이산화탄소 온실가스에 비교해 배출량은 적지만 지구온난화지수가 매우 높아 지구온난화에 미치는 영향이 크다. 이러한 불화가스의 주요배출원이 국가 중추산업인 반도체/LCD 산업이나 중전기 산업 등에 집중되어 있어 더욱 심각하다. 따라서 본 논문에서는 불화가스 저감 기술 중 분리막 기반 불화가스 회수 분리 공정을 중심으로 불화가스 저감 기술 개발 현황을 살펴보고자 하였다.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.1-5
• /
• 2001

A study on the new active type oil-water separation system including the oil-water separation system of magnetic film was carried out. Separation system is composed of several active types of circulating oil separation steps and one magnetic film separation step at final stage. At the magnetic separation step, ferrofluid easily forms a weak magnetic mixture with oil, which is from the water by magnetic field gradient. The vessel has been designed to run at the maximum speed of 25 knots. And two typical forms of SWATH and Catamaran have been studied as a new type of oil recovery vessel.

• 자원리싸이클링
• /
• 제28권3호
• /
• pp.21-25
• /
• 2019

The utilization of incineration ash from municipal waste must be promoted to solve the social problem on the shortage of final disposal site. In this research, metals should be recovered to avoid the damage of the crushing machine during the utilization of incineration ash in cement industry. In fact, incineration bottom ash from municipal waste contains iron in 3-5%. Nonferrous metal and stainless steel in 1% is also included. The research and development on the physical recovery process was performed not only to remove the metals but also to recover high grade products. Metals were separated from incineration ash in Maruya Co. Ltd.. In fact, iron scrap recovered by magnetic separation can be selled. After that, mixed metal was separated from incineration ash using screen. In this research, mixed metal tried to divided copper, aluminum, brass and stainless steel using drum type magnetic separation, eddy current separation and high magnetic separation. As a result, recovered iron had an 80% for the grade. Aluminum was recovered by eddy current separation without copper and brass.

• 자원환경지질
• /
• 제8권3호
• /
• pp.165-168
• /
• 1975

The grade and recovery rate and its sulphur content of iron concentrate compared respectively as varied with redcued size using the Crocket Magnetic Separator and the Wet-Drum-Magnetic Separator in the magnetic separation test of iron ore from Yangyang mine. The content of sulphur was decreased distinctly as the size was finer. In case of the sample of -100 mesh, using the Crocket Magnetic Separator, the sulphur content of iron ore was decreased to 0.10% and its grade increased to 67.0%, but the recovery rate was no more than 85.1%. In the Wet-Drum type, the grade and the recovery rate of concentrate was better than those in the Crocket Magnetic Separation, but the content of sulphur was more than that in the Crocket Magnetic Separation. The Crocket type is suitable for less sulphur content while the Wet-Drum Magnetic Separator is suitable for better the grade recovery rate of the magnetic concentrate.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권1호
• /
• pp.22-25
• /
• 2017

Steel slag has been considered as an industrial waste. A huge amount of slag is produced as a byproduct and the steel slag usually has been dumped in a landfill site. However the steel slag contains valuable resources such as iron, copper, manganese, and magnesium. Superconducting magnetic separation has been applied on recovery of the valuable resources from the steel slag and this process also has intended to reduce the waste to be dumped. Cryo-cooled Nb-Ti superconducting magnet with 100 mm bore and 600 mm of height was used as the magnetic separator. The separating efficiency was evaluated in the function of magnetic field. A steel slag was ground and analyzed for the composition. Iron containing minerals were successfully concentrated from less iron containing portion. The separation efficiency was highly dependent on the particle size giving higher separating efficiency with finer particle. The magnetic field also effects on the separation ratio. Current study showed that an appropriate grinding of slag and magnetic separation lead to the recovery of metal resources from steel slag waste rather than dumping all of the volume.

• 한국응용과학기술학회지
• /
• 제41권1호
• /
• pp.19-26
• /
• 2024

Recently, separation membranes have been applied to fields such as water supply, sewage treatment, gray water reuse, and air pollution control. Chemical cleaning technology is attracting attention among the methods of reusing these expensive separation membranes. It was found that the separation membrane could be regenerated using chemical cleaning. Specifically, it was found that the use time of the separation membranes regenerated by chemical cleaning was sustainable for more than 1,700 hours. Additionally, it was found that the flux recovery ratio after chemical cleaning was maintained at least 60%. In addition, the flux recovery ratio of HYDREX 4710, an organic membrane cleaner, and 4703, an inorganic membrane cleaner, was 76% and 62%, respectively, showing the highest flux recovery ratio among the chemicals used. Considering that the target raw water of this study is biological secondary treatment water, it was suggested that chemical cleaning could be actively used to regenerate separation membranes in future water treatment.

• 자원리싸이클링
• /
• 제22권1호
• /
• pp.29-35
• /
• 2013

본 연구에서는 마찰하전정전선별을 적용하여 폐자동차 라디에이터의 Nylon을 회수하기 위한 재질분리 연구를 수행하였다. 시료(Nylon, PP glass)의 효율적인 재질분리를 위하여, 각각의 시료를 대상으로 다양한 하전재질에 따른 하전극성과 하전량을 faraday cage로 조사하였다. 그리고 시료를 분극할 수 있는 재질을 대상으로 기초 분리실험을 수행하여 하전재질을 선정하였다. 선정된 하전재질을 사용하여 연속처리가 가능한 마찰하전정전선별 장치를 개발하였으며, 다양한 조건별로 분리실험을 수행하여 시료의 회수 가능성을 확인하였다.

• Journal of Magnetics
• /
• 제15권2호
• /
• pp.91-98
• /
• 2010

The paper presents results of a study on the selective separation technology of ferrous and non-ferrous metals from broken light bulbs. The proposed method is to use magnetic fluids to obtain a magnetic fluid based- separation. [1] The study was conducted using three types of waste materials: regular light bulbs, auto light bulbs and neon tubes. In order to process the waste materials, a six stages technologic flow was developed: a) separation of light bulbs components; b) Physical and chemical analysis of raw materials; c) grain conditioning of the raw material; d) dry magnetic separation of ferrous components; e) magnetic fluid separation of non-magnetic material; f) recovery of the magnetic fluid adhered to the surface of the separated material grains. [2] This study shows that magnetic fluid separation is only profitable for regular and auto light bulbs and is not profitable in the case of neon tubes.

• 한국음향학회지
• /
• 제27권1호
• /
• pp.26-32
• /
• 2008

UBSS (under-determined blind source separation)는 BMMR (blind mixing matrix recovery) 과정과 BSR (blind source recovery) 과정으로 구분된다. 일반적으로 이 두 과정은 취득된 데이터의 sparseness를 이용하여 수행되는데, 얼마나 sparseness를 정확히 측정하느냐에 따라 그 성능이 좌우된다. 본 논문에서는 Gini 계수를 이용한 sparseness의 측정 방법을 BSR 과정에 도입하여, $l_1$-노름, $l_q$-노름과 쌍곡탄젠트 (hyperbolic tangent)를 이용하는 측정 방법들과 비교하였으며, 보다 정확한 sparseness 측정과 향상된 BSR 성능을 획득하였다. 이는 컴퓨터 모의 실험을 통하여 검증되었다.