Browse > Article
http://dx.doi.org/10.9714/psac.2017.19.1.022

Superconducting magnetic separation of ground steel slag powder for recovery of resources  

Kwon, H.W. (Department of Environmental Engineering, Andong National University)
Kim, J.J. (Department of Earth and Environmental Sciences, Andong National University)
Ha, D.W. (Korea Electrotechnology Research Institute)
Choi, J.H. (Department of Environmental Engineering, Catholic University of Pusan)
Kim, Young-Hun (Department of Environmental Engineering, Andong National University)
Publication Information
Progress in Superconductivity and Cryogenics / v.19, no.1, 2017 , pp. 22-25 More about this Journal
Abstract
Steel slag has been considered as an industrial waste. A huge amount of slag is produced as a byproduct and the steel slag usually has been dumped in a landfill site. However the steel slag contains valuable resources such as iron, copper, manganese, and magnesium. Superconducting magnetic separation has been applied on recovery of the valuable resources from the steel slag and this process also has intended to reduce the waste to be dumped. Cryo-cooled Nb-Ti superconducting magnet with 100 mm bore and 600 mm of height was used as the magnetic separator. The separating efficiency was evaluated in the function of magnetic field. A steel slag was ground and analyzed for the composition. Iron containing minerals were successfully concentrated from less iron containing portion. The separation efficiency was highly dependent on the particle size giving higher separating efficiency with finer particle. The magnetic field also effects on the separation ratio. Current study showed that an appropriate grinding of slag and magnetic separation lead to the recovery of metal resources from steel slag waste rather than dumping all of the volume.
Keywords
High-gradient magnetic separation; recovery; steel slag; environmental application; superconducting magnet;
Citations & Related Records
연도 인용수 순위
  • Reference
1 F. Yin, P. Xing, Q. Li, C. Wang, and Z. Wang, " Magnetic separation-sulphuric acid leaching of Cu-Co-Fe matte obtained from copper converter slag for recovering Cu and Co," Hydrometallurgy, vol. 149, pp. 189-194, 2014.   DOI
2 R.A. Riker, P. Rem, W.L. Dalmijn, "Improved method for prediction of heavy metal recoveries from soil using high intensity magnetic separation (HIMS)," Int. J Miner. Process, vol 54, pp. 165-182, 1998.   DOI
3 A. B. Fuertes, and P. Tartaj, "A facile route for the preparation of superparamagnetic porous carbons," Chem. Mater., vol. 18, pp. 1675-1679, 2006.   DOI
4 H. Shen, and E. Forssberg, "An overview of recovery of metals from slags," Waste Manage., vol. 23, pp. 933-949, 2003.   DOI
5 D. Mehta, S. Mazumdar, and S. K. Singh, "Magnetic adsorbents for the treatment of water/wastewater-A review," J. Water Process. Eng., vol. 7, pp. 244-265, 2015.   DOI
6 D. H. K. Reddy, and Y. Yun, "Spinel ferrite magnetic adsorbents: Alternative future materials for water purification?," Coord. Chem. Rev., vol. 315, pp. 90-111, 2016.   DOI
7 J. Pan, G. Zheng, D. Zhu, and X. Zhou, "Utilization of nickel slag using selective reduction followed by magnetic separation," Trans. Nonferrous Met. Soc. China, vol. 23, pp. 3421-3427, 2013.   DOI
8 Jee-Eun Kim, Dong-Woo Ha, and Young-Hun Kim, "Separation of Steel Slag From Landfill Waste for the Purpose of Decontamination Using a Superconducting Magnetic Separation System," IEEE Trans. Appl. Supercond., vol. 25, no. 3, pp. 1-4, 2015.
9 L. Lin, Y. Bao, M. Wang, W. Jiang, and H. Zhou, "Separation and recovery of phosphorus from p-bearing steelmaking slag," J. Iron Steel Res. Int., vol. 21, no. 5, pp. 496-502, 2012.
10 R. K. Nadirov, L. I. Syzdykova, A. K. Zhussupova, and M. T. Usserbaev, "Recovery of value metals from copper smelter slag by ammonium chloride treatment," Int. J. Miner. Process., vol. 124, pp. 145-149, 2013.   DOI
11 X. Zhai, N. Li, X. Zhang, Y. Fu, and L. Jiang, "Recovery of cobalt from converter slag of Chambishi copper smelter using reduction smelting process," Trans. Nonferrous Met. Soc. China, vol. 21, pp. 2117-2121, 2011.   DOI
12 N. Menad, N. Kanari, and M. Save, "Recovery of high grade iron compounds from LD slag by enhanced magnetic separation techniques," Int. J. Miner. Process., vol. 126, pp. 1-9, 2014.   DOI
13 K. Lundkvist, M. Brämming, M. Larsson, and C. Samuelsson, "System analysis of slag utilization from vanadium recovery in an integrated steel plant," J. Clean. Prod., vol. 47, pp. 43-51, 2013.   DOI
14 L. Huang, H. Lai, C. Gan, H. Xiong, P. Xing, and X. Luo, "Separation of boron and phosphorus from Cu-alloyed metallurgical grade silicon by $CaO-SiO_2-CaCl_2$ slag treatment," Sep. Purif. Technol. vol. 170, pp. 408-416, 2016.   DOI