• 대한기계학회논문집B
• /
• 제28권8호
• /
• pp.910-920
• /
• 2004

The heat/mass transfer characteristics in a rotating two-pass duct with and without rib turbulators are investigated in the present study. The square duct has a hydraulic diameter ($D_h$) of 26.7 mm, and $1.5\;mm{\times}1.5\;mm$ square $90^{\circ}$-rib turbulators are attached on the leading and trailing walls. The pitch-to-rib height ratio (p/e) is 10. The Reynolds number based on the hydraulic diameter is kept constant at 10,000 to exclude the Reynolds effect, and the rotation number is varied from 0.0 to 0.20. In the smooth duct, the curvature of the $180^{\circ}$-turn produces Dean vortices that enhance heat/mass transfer in the post-turn region. When rib turbulators are installed, heat/mass transfer is augmented 2.5 times higher than that of the smooth duct since the main flow is turbulated by reattaching and separating in the vicinity of the duct surfaces. The duct rotation results in heat/mass transfer discrepancy so that Sherwood number ratios are higher on the trailing surface in the first-pass and on the leading surface in the second-pass. In the turning region, Dean vortices shown in the stationary case transform into one large asymmetric vortex cell, and subsequent heat/mass transfer characteristics also change. As the rotation number increases, the heat/mass transfer discrepancy enlarges.

• Steel and Composite Structures
• /
• 제27권5호
• /
• pp.577-598
• /
• 2018

The imperfect steel-concrete interface bonding is an important deficiency of the concrete-filled double skin tubular (CFDST) columns that led to separating concrete and steel surfaces under lateral loads and triggering buckling failure of the columns. To improve this issue, it is proposed in this study to use longitudinal and transverse steel stiffeners in CFDST columns. CFDST columns with different patterns of stiffeners embedded in the interior or exterior surfaces of the inner or outer tubes were analyzed under constant axial force and reversed cyclic loading. In the finite element modeling, the confinement effects of both inner and outer tubes on the compressive strength of concrete as well as the effect of discrete crack for concrete fracture were incorporated which give a realistic prediction of the seismic behavior of CFDST columns. Lateral strength, stiffness, ductility and energy absorption are evaluated based on the hysteresis loops. The results indicated that the stiffeners had determinant role on improving pinching behavior resulting from the outer tube's local buckling and opening/closing of the major tensile crack of concrete. The lateral strength, initial stiffness and energy absorption capacity of longitudinally stiffened columns with fixed-free end condition were increased by as much as 17%, 20% and 70%, respectively. The energy dissipation was accentuated up to 107% for fixed-guided end condition. The use of transverse stiffeners at the base of columns increased energy dissipation up to 35%. Axial load ratio, hollow ratio and concrete strength affecting the initial stiffness and lateral strength, had negligible effect of the energy dissipation of the columns. It was also found that the longitudinal stiffeners and transverse stiffeners have, respectively, negative and positive effects on ductility of CFDST columns. The conclusions, drawn from this study, can in turn, lead to the suggestion of some guidelines for the design of CFDST columns.

• 복식
• /
• 제58권7호
• /
• pp.13-30
• /
• 2008

Visual language is 'a form of communication without text'. Visual language is one of the strongest methods to spread knowledge. Uniforms could be interpreted as a symbolic language that establishes order in this complicated modern society by placing identity and responsibility on each members of various different organizations. In light of the above, the purpose of this research paper will be to analyze police uniforms of U.S.A, Great Britain, Italy, France and Korea as a form of visual language and interpreting them in terms of visual design in order to understand the fundamental ideas behind the designs and the effective applications thereof. Upon analysis of traffic police uniforms of each individual county mentioned above by separating each uniform's distinctive design, pattern, color, material and decoration based on visual factor, three characteristics of authority, dynamic functionality and friendliness were derived from comparing and analyzing each country's distinctive uniform design. The traditional unique role of police in our society was to maintain social order as their nature inherently possesses characteristic of authority and preservation, but has since undergone transition in many countries to appeal to the broader public by incorporating friendliness and dynamic functionality. Analyzing police uniforms in terms of visual linguistic sense requires a much more profound process of understanding beyond simple interpretation of configurative shapes. In conclusion, the true purpose of uniforms is to include and portray images of mankind's desire toward expressing ideas like 'mankind's bias toward existence beyond theirselves and the exercise of force through authority' and materializing such ideas into a physical form.

• 한국정밀공학회지
• /
• 제7권1호
• /
• pp.37-52
• /
• 1990

In this study, the characteristics of cooling and rolling during strip casting process is obtained in comparison with the experimental and analytical results. The prupose of this study is to effectively analyze the thermal and mechanical deformation of roller applying the results of the heat transfer and the pressure distribution to boundary conditions. And then the relation between strip thickness and roll deformation is shown. The second purpose is to obtain the proper condition of the continuous casting for stainless steel. The summary and conclusions can be made on the basis of the results obtained by the theories and experiments. a) The strip casting condition for the fine surface quality of tin-alloy as-cast material was obtained in accordance with the velocity of roll rotation and initial roll gap. b) The experimental condition that the dimension of the cast strip thickness coincide with that of the initial roll gap was according to the experimental result of continuous casting by twin-roll type. c) The thermoelastic finite element model to calculate the roll deformation is represented. Thermoelastic model prediction for the roll deformation are in good agreement with the experimental results considering the thermal expansion of the roll. d) The higher cooling rates were obtained by a twin-roller quenching technique. Also quenched microstructure of the rapidly solidified shell was verified. e) The magnitude of roll deformation due to the thermal expansion and roll separating force is quantit- atively represented in the analysis of continuous casting for stainless steel.

• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.65-72
• /
• 2020

얼음을 제공하는 기능이 구비된 냉장고는 대부분 냉장고 내부의 얼음 저장소에 미리 얼음을 채워 두고 사용자가 필요할 때 많은 양의 얼음을 취출할 수 있도록 하고 있다. 그러나 냉장고의 얼음 저장소에 얼음이 채워진 상태로 냉장고가 장기간 사용되지 않거나 정상적인 동작 중에도 시간이 경과하면 얼음이 서로 엉기는 현상이 발생한다. 이렇게 엉긴 얼음 덩어리를 분리시키는 메커니즘이 구비되어 있으나 얼음 엉김 현상이 심할 경우 얼음이 완전히 취출되지 못하는 문제가 있다. 본 연구에서는 이러한 문제를 해결하기 위해 얼음이 엉기는 과정과 얼음의 분리력에 관한 기존의 연구를 조사하였고, 인위적으로 얼음을 엉기게 하여 다양한 조건에서 얼음의 취출 정도를 실험하였다. 이 과정에서 얼음의 취출을 방해하는 기존 얼음 저장소 형상의 문제점에 착안하여 이를 개선하기 위한 형상과, 완전 취출을 위해 얼음 분쇄 메커니즘의 작동 반경을 넓히는 새로운 메커니즘을 제안하였다. 제안된 메커니즘의 시제품을 제작하고 실제 냉장고에 적용하여 얼음이 완전 취출됨을 검증하였다. 그 결과 기존 얼음 저장소의 형상과 분쇄 메커니즘에서 얼음 취출률이 65%정도이었으나, 제안된 형상과 메커니즘에서는 완전히 추출되었다.

• The Journal of Advanced Prosthodontics
• /
• 제12권4호
• /
• pp.233-238
• /
• 2020

PURPOSE. This study aims to compare the marginal fitness of two types of implant-supported fixed dental prosthesis, i.e., cementless fixation (CL.F) system and cement-retained type. MATERIALS AND METHODS. In each group, ten specimens were assessed. Each specimen comprised implant lab analog, titanium abutment fabricated with a 2-degree tapered axial wall, and zirconia crown. The crown of the CL.F system was retained by frictional force between abutment and relined composite resin. In the cement-retained type, zinc oxide eugenol cement was used to set crown and abutment. All specimens were sterilized with ethylene oxide, immersed in Prevotella intermedia culture in a 50 mL tube, and incubated with rotation. After 48 h, the specimens were washed thoroughly before separating the crown and abutment. The bacteria that penetrated into the crown-abutment interface were collected by washing with 500 µL of sterile saline. The bacterial cell number was quantified using the agar plate count technique. The BacTiter-Glo Microbial Cell Viability Assay Kit was used to measure bacterial adenosine triphosphate (ATP)-bioluminescence, which reflects the bacterial viability. The t-test was performed, and the significance level was set at 5%. RESULTS. The number of penetrating bacterial cells assessed by colony-forming units was approximately 33% lower in the CL.F system than in the cement-retained type (P<.05). ATP-bioluminescence was approximately 41% lower in the CL.F system than in the cement-retained type (P<.05). CONCLUSION. The CL.F system is more resistant to bacterial penetration into the abutment-crown interface than the cement-retained type, thereby indicating a precise marginal fit.

• 멤브레인
• /
• 제6권4호
• /
• pp.265-272
• /
• 1996

금속이온 분리를 위한 운반체 지지형 (고분자/운반체) 복합막을 수면전개법에 의하여 제조하였다. 이들 막의 형상은 전개용액의 물성에 의하여 영향을 받는다. (고분자/18-crown-6) 복합용액의 표면장력은 18-crown-6의 농도가 증가함에 따라 감소하는 경향을 나타내며, 고분자에 따른 용액의 표면장력은 PVC>PS>CA 순서로 감소하였다. 점도는 18-crown-6의 농도가 증가함에 따라 PVC계와 PS계 용액은 큰 변화가 없으나 CA계 용액은 감소하는 경향을 나타내었다. 18-crown-6 환형고리분자는 고분자쇄 사이에서 전기적인 완충역할을 하여 고분자쇄간의 분자간력을 약화시켜줌으로써 복합 용액의 전개성을 증가시켰다. 복합박막의 표면형상은 단일박막보다 균일하였으며, 18-crown-6가 증가함에 따라 전후면은 모두 균일한 구조극 나타내었다.

• Elastomers and Composites
• /
• 제37권1호
• /
• pp.31-38
• /
• 2002

카르복실화 스티렌-부타디엔 라텍스의 중합시간은 사용되는 부타디엔 모노머가 공액 이중결합을 가진 화학적 구조로 인하여 라디칼 중합시 홀 전파의 비편재화로 인해 아크릴 에멀젼의 제조시 보다 중합시간이 매우 길다. 또한 라텍스 자체가 고분자와 분산매의 분리 없이 사용되기 때문에 라텍스의 안정성은 대단히 중요하다. 물성의 저하없이 반응시간을 단축하기 위하여 기존에 사용하던 연쇄이동제인 사염화탄소 대신 tert-dodecylmercaptane 과 ${\alpha}$-methylstyrene dimer를 혼합 사용하여 반응시간을 14시간에서 12시간으로 줄일 수 있었다. 반응 성장단계에서 아크릴산의 투입량을 0.3 part로 제한하여 라텍스의 점도 상승을 막고 초기중합단계 직후에 아크릴아미드를 0.1 part 첨가하여 라텍스 입자의 내부영역과 외부영역의 고분자 사슬의 상호간확산을 막아 단단하면서도 접착력을 유지할 수 있는 라텍스의 합성 결과를 얻었다.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.803-812
• /
• 2023

The subsea separator of an offshore plant for offshore oil and gas development performs the process of separating oil and gas from crude oil produced in the subsea. The oil-gas subsea separator can be divided into a gravity type that separates fluids by gravity and an in-line type that separates fluids using centrifugal force of density. In the case of the deep sea, the development of a small in-line type separator is required due to manufacturing cost and safety problems caused by water pressure. Therefore, in this study, the gas-liquid phase separation efficiency of the subsea separator was identified through the study of the multiphase flow characteristics of the in-line type separator. For the optimal design of the in-line type separator, the shape of the internal swirl element(ISE) was selected first, and the separation efficiency results for each section of the in-line type separator were analyzed. This study was conducted in parallel with experiments and numerical analysis, and it is expected that the reliability and efficiency of the in-line type separator will be improved through the results.

• 한국지진공학회논문집
• /
• 제3권2호
• /
• pp.87-96
• /
• 1999

시간영역에서의 구조물의 해석은 직접적분법과 모드중첩법에 의하여 구해질 수 있다 그 중에서도 모드중첩법에 의한 해석방법은 몇가지 저차 진동모드를 사용하여 비교적 정확한 해를 구할 수 있기 때문에 동적해석에 널리 사용되고 있다, 그러나 비선형해석에서는 각 부재들의 상태에 따라 강성이 달라지므로 고유 진동모드를 정의할수 없거나 변화되는 강성에 따라 고유진동 모드를 지속적으로 다시 구하여야 하는 불편 있으므로 모드 중첩법을 이용한 비선형해석은 완전탄소성모델 등 극히 제한된 조건에서만 실행이 가능하였다 본논문에서는 강성행렬을 각 부재별로 분리시키고 비선형복원력과 초기선형복언력과 초기선형복원력의 차이를 하중항에 반영시킴으로써 모드중첩법을 이용하여 비선형 해석은완전탄소성모델 등 극히 제한된 조건에서만 실행이 가능하였다 본 논문에서는 강성행렬을 각 부재별로 분리시키고 비선형 복원력과 초기선형복원력의 차이를 하중항에 반영시킴으로써 모드중첩법을 이용하여 비선형해석이 가능한 방법을 제시하고자 한다. 특히 각 부재 강성을 각 부재의 상대변위의 함수로 나타냄으로써 연속적인 계산이 가능하게 하였다 본 논문에서 제시된 방법은 전단보모델에 적용하였으며 모드 개수를 변화시켜 지진하중에 의한 최대변위를 계산하여 이를 직접적분버에 의한 결과와 비교하였다.