• 제목/요약/키워드: Separated model

검색결과 944건 처리시간 0.03초

시간영역에서의 다중 입력-출력시스템의 모드매개변수 추정방법 (A Time Domain Modal Parameter Estimation Method for Multiple Input-Output Systems)

  • 이건명
    • 대한기계학회논문집
    • /
    • 제18권8호
    • /
    • pp.1997-2004
    • /
    • 1994
  • A model analysis method has been developed in the paper. The method estimates the modal parameters of multiple input-output systems, assesses their quality, and seperates structural modes form computation ones. The modal parameter extraction algorithm is the least squares method with a finite difference model relating input and output time data. The quality of the estimated system model can be assessed in narrow frequency bands by comparing the measured and model predicted responses in time domain with the aid of digital filters. Structural modes can be effectively separated from computational ones using the convergence factor which represents the pole convergence rate. The modal analysis method has been applied to simulated and experimental vibration data to evaluate its utility and limitations.

역압력구배 영향을 고려한 저레이놀즈수 k-ε 모형의 소산율 방정식 수정 (Modification of Dissipation Rate Equation of Low Reynolds Number k-ε Model Accounting for Adverse Pressure Gradient Effect)

  • 송경;조강래
    • 대한기계학회논문집B
    • /
    • 제23권11호
    • /
    • pp.1399-1409
    • /
    • 1999
  • It is known that previous models are unsatisfactory in predicting adverse pressure gradient turbulent flows. In the present paper, a revised low Reynolds number $k-{\varepsilon}$ model is proposed. In this model, a newly developed term is added lo the dissipation rate equation. In order to reflect appropriate effects for an adverse pressure gradient. The added tenn is derived by considering the distribution of mean velocity and turbulent properties in the turbulent flow with, adverse pressure gradient. The new $k-{\varepsilon}$ model was applied to calculations of flat plate flow with adverse pressure gradient, conical diffuser flow and backward facing step flow. It was found that the three numerical results showed better agreement than other models compared with DNS results and experimental ones.

시뮬레이션을 위한 자동차 충 방전 시스템의 등가 회로 모델 개발 (Development of An Electric Circuit Model of Vehicle Charging-discharging System for Simulation)

  • 박현진;선우명호;이재인
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
    • /
    • pp.570-572
    • /
    • 1999
  • An equivalent circuit model of vehicle charging-discharging system for simulation is developed. The vehicle electric power system consists of alternator and battery. The alternator must have adequate capacity for providing electric energy to all loads, and the battery supports the alternator by offering insufficient energy when the alternator output energy is not enough. The alternator model is simplified for the use of characteristic curve, which was provided by its manufacturer, and the battery model is separated in charging mode and discharging mode because of its complex characteristics. Developed circuit model is validated by comparing the simulation data and real experimental data.

  • PDF

난류 박리 및 재부착 유동의 해석을 위한 저레이놀즈수 4-방정식 난류 열전달 모형의 개발 (A low-Reynolds-number 4-equation heat transfer model for turbulent separated and reattaching flows)

  • 이광훈;성형진
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 1995년도 추계 학술대회논문집
    • /
    • pp.37-42
    • /
    • 1995
  • In the present study, an improved version of 4-equation low-Reynolds-number 4-equation model is proposed. The equations of the temperature variance ($k_{\theta}$) and its dissipation rate(${\varepsilon}_{\theta}$) are solved, in concert with the equations of the turbulent kinetic energy(k) and its dissipation rate(${\varepsilon}$). In the present model, the near-wall effect and the non-equilibrium effect are fully taken into consideration. The validation of the model is then applied to the turbulent flow behind a backward-facing step and the flow over a blunt body. The predicted results of the present model are compared and evaluated with the relevant experiments.

  • PDF

Assessment of Reynolds Stress Turbulence Closures in the Calculation of a Transonic Separated Flow

  • Kim, Kwang-Yong;Son, Jong-Woo;Cho, Chang-Ho
    • Journal of Mechanical Science and Technology
    • /
    • 제15권7호
    • /
    • pp.889-894
    • /
    • 2001
  • In this study, the performances of various turbulence closure models are evaluated in the calculation of a transonic flow over axisymmetric bump. k-$\varepsilon$, explicit algebraic stress, and two Reynolds stress models, i.e., GL model proposed by Gibson & Launder and SSG model proposed by Speziale, Sarkar and Gatski, are chosen as turbulence closure models. SSG Reynolds stress model gives best predictions for pressure coefficients and the location of shock. The results with GL model also show quite accurate prediction of pressure coefficients down-stream of shock wave. However, in the predictions of mean velocities and turbulent stresses, the results are not so satisfactory as in the prediction of pressure coefficients.

  • PDF

다공성 방풍벽이 설치된 삼각프리즘 주위 유동장의 수치모사 (Numerical Simulation of the Wind Flow Over a Triangular Prism with a Porous Windbreak)

  • 김현구;임희창;이정묵
    • 한국대기환경학회지
    • /
    • 제15권3호
    • /
    • pp.223-233
    • /
    • 1999
  • The wind-flow characteristics over a two-dimensional triangular prism with a porous windbreak are numerically investigated. The geometry is a simplified model of large outdoor stack with a frontal wall-type windbreak which is used to prevent particle dispersion by reducing wind speed over stak surface. In the present numerical model, the RNG k-$\varepsilon$ model, the orthogonal grid system and the QUICK scheme are employed for the successful simulation of separated flow. The predicted results are compared and validated with the associated wind-tunnel experiments. In addition, the trajectories of dispersed particles and their sedimentation characteristics are quantitatively investingated using a Lagrangian turbulent-dispersion model.

  • PDF

모델 데칸트를 이용한 고농도 슬러리상태 양돈폐수의 고액분리특성에 관한 연구 (A Study on the Solid-Liquid Separation Characteristics for Highly Concentrated Swine Wastewater Using Model Decanter)

  • 나은수;강호
    • 연구논문집
    • /
    • 통권30호
    • /
    • pp.67-77
    • /
    • 2000
  • This study was performed to investigate the characteristics and performance of model Decanter for separating swine wastewater to solid and liquid which is slurry state with 12.6% TS. Swine wastewater of the slurry tank was pumped into model Decanter which capacity was $2m^3$/hr in 10% TS Slurry inside of bowl was separated to solid-liquid by centrifugal acceleration. Sampling was done in the section of slurry feed pipe, supernatant outflow pipe, cake discharge pipe. After solid-liquid separation TS, $COD_cr$ and slurry volume reduction effect represented 38%, 40%, 19.6% respectively. Relation factor of model Decanter operation slurry concentration, optimum retention time of slurry, overflow velocity of supernatant, supernatant concentration, sludge removal rate etc. Optimal operation conditions can be set and evaluated efficiency based on the experimental results in the case of Decanter adopted for solid-liquid separation in highly concentrated swine wastewater.

  • PDF

A model of roof-top surface pressures produced by conical vortices : Model development

  • Banks, D.;Meroney, R.N.
    • Wind and Structures
    • /
    • 제4권3호
    • /
    • pp.227-246
    • /
    • 2001
  • The objective of this study is to understand the flow above the front edge of low-rise building roofs. The greatest suction on the building is known to occur at this location as a result of the formation of conical vortices in the separated flow zone. It is expected that the relationship between this suction and upstream flow conditions can be better understood through the analysis of the vortex flow mechanism. Experimental measurements were used, along with predictions from numerical simulations of delta wing vortex flows, to develop a model of the pressure field within and beneath the conical vortex. The model accounts for the change in vortex suction with wind angle, and includes a parameter indicating the strength of the vortex. The model can be applied to both mean and time dependent surface pressures, and is validated in a companion paper.

복합지형상에서 비정상 박리흐름에 의한 확산 (Dispersion in the Unsteady Separated Flow Past Complex Geometries)

  • 류찬수
    • 한국지구과학회지
    • /
    • 제22권6호
    • /
    • pp.512-527
    • /
    • 2001
  • 복합지형을 지나는 박리흐름(separated flows)들이 와도 이론에 의해 모델링 되었다. 흐름은 비회전성 및 비점성으로 가정하였으며, 선형 시어흐름에 대한 유선함수를 결정하기 위해 새로운 기법이 기술되었다. 지형지물의 형태로는 snow cornice과 backward-facing step을 정의하였으며, 이러한 지형지물의 후미에는 유체의 박리현상과 역류현상(reattachment)이 생긴다. 유체의 박리현상이 지형지물의 가장자리에 발생되게 하기 위해 점 와도를 흐름에 발생시켰고, 지형지물의 가장자리에 있는 뾰족한 부분을 완화하고 최대곡률 부근에서의 섭동운동에 중요한 박리흐름 발생지점의 구속조건을 없애기 위해 conformal mapping을 수정하였다. 와도 발생지점에서 와도를 평형으로부터 이동시키거나, 또는 임의의 섭동을 초기흐름에 가하는 방식으로 섭동을 가하여 비정상흐름을 발생시켰다. 박리지점의 풍상측에서 연속적으로 방출되고, 또한 bubble의 이차순환에 의해 변형된 물질의 궤적들이 수치적으로 적분되었으며, 시간에 대한 농도누적이 역류지점의 풍하측 고정된 지점에서 계산되었다. 본 연구에 사용된 모델은 방출물질의 확산형태와 간헐성을 제대로 다룰 수 있음을 알 수 있으며, 이산적인 방법에 의한 다중-와도모델 및 수치모델의 결과들과도 일치한다. 본 연구에 의하면, 박리 및 역류현상이 있는 유체의 흐름 속에 순환하는 bubble들의 비정상상태(unsteadiness)는 풍하측에서 대규모의 고농도 누적을 일으키는 주요 원인이다.

  • PDF

인체 유래 생물학적 물질의 소유권 - 사체를 중심으로 - (Ownership of Human Biological Material - Concerning on Dead Body -)

  • 정규원
    • 의료법학
    • /
    • 제18권1호
    • /
    • pp.37-60
    • /
    • 2017
  • 전통적인 법이론에 의하여 인간은 권리의 주체이기 때문에 인체로부터 유래한 생물학적 물질은 권리의 객체가 될 수 없다. 하지만 의학과 생명과학의 발전으로 인하여 인체로 부터 유래한 생물학적 물질은 다양한 용도로 사용되고 있으며 인체로부터 유래한 생물학적 물질의 객체성 여부와 소유권 인정 여부에 대한 논의는 지속적으로 제기되고 있다. 인체로부터 유래한 생물학적 물질을 법적으로 파악하는 이론은 전통적으로 자율성에 근거한 모델이었으며 현재도 그것이 가장 보편적으로 받아들여지고 있다. 하지만 자율성 모델에 의하여 인체로부터 유래한 생물학적 물질을 파악할 경우 인체로부터 유래한 생물학적 물질을 다루는 현실을 제대로 설명할 수 없을 뿐만 아니라 오히려 배분적 정의의 측면에서 볼 때 적절하지 못한 결론에 도달할 수도 있다는 의문이 제기되고 있다. 인체 유래 생물학적 물질을 소유권의 객체로 파악하려는 소유권 모델은 인간의 존엄과 가치에 반하는 이론 구성이라는 의혹을 받고 있다. 하지만 소유권은 단일한 권리가 아니며 다양한 권리들의 집합체이며 그 내용이 어떻게 구성될 것인가는 객체의 특성 등을 고려하여 판단하면 될 것으로 생각된다. 본 논문은 인체 유래 생물학적 물질의 소유권 전체 보다는 일단 사체로부터 유래한 물질의 소유권 인정 여부를 중점적으로 다루었다. 이를 통하여 인체 유래 생물학적 물질전반에 대한 법이론적 고찰이 현재의 과학적 사실에 적합한 형태로 이루어지기를 기대한다.

  • PDF