• 제목/요약/키워드: Seoul subway

검색결과 675건 처리시간 0.024초

서울시 지하철 승강장의 스크린도어 설치 전·후 PM10 오염원의 기여도 비교 연구 (A Comparative Study on PM10 Source Contributions in a Seoul Metropolitan Subway Station Before/After Installing Platform Screen Doors)

  • 이태정;전재식;김신도;김동술
    • 한국대기환경학회지
    • /
    • 제26권5호
    • /
    • pp.543-553
    • /
    • 2010
  • Almost five million citizens a day are using subways as a means of traffic communication in the Seoul metropolitan. As the subway system is typically a closed environment, indoor air pollution problems frequently occurs and passengers complain of mal-health impact. Especially $PM_{10}$ is well known as one of the major pollutants in subway indoor environments. The purpose of this study was to compare the indoor air quality in terms of $PM_{10}$ and to quantitatively compare its source contributions in a Seoul subway platform before and after installing platform screen doors (PSD). $PM_{10}$ samples were collected on the J station platform of Subway Line 7 in Seoul metropolitan area from Jun. 12, 2008 to Jan. 12, 2009. The samples collected on membrane filters using $PM_{10}$ mini-volume portable samplers were then analyzed for trace metals and soluble ions. A total of 18 chemical species (Ba, Mn, Cr, Cd, Si, Fe, Ni, Al, Cu, Pb, Ti, $Na^+$, $NH_4^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, and ${SO_4}^{2-}$) were analyzed by using an ICP-AES and an IC after performing proper pre-treatments of each sample filter. Based on the chemical information, positive matrix factorization (PMF) model was applied to identify the source of particulate matters. $PM_{10}$ for the station was characterized by three sources such as ferrous related source, soil and road dust related source, and fine secondary aerosol source. After installing PSD, the average $PM_{10}$ concentration was decreased by 20.5% during the study periods. Especially the contribution of the ferrous related source emitted during train service in a tunnel route was decreased from 59.1% to 43.8% since both platform and tunnel areas were completely blocked by screen doors. However, the contribution of the fine secondary aerosol source emitted from various outside combustion activities was increased from 14.8% to 29.9% presumably due to ill-managed ventilation system and confined platform space.

CONSTRUCTION OF SUBWAY TONNEL BENEATH EXISTING VEHICLE UNDERPASS

  • Kim, In-Kuin
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1990년도 PROCEEDINGS OF THE FIRST KOREA-JAPAN JOINT GEOTECHNICAL SEMINAR ON EXCAVATION and TUNNELING IN URBAN AREAS
    • /
    • pp.25-34
    • /
    • 1990
  • For the construction of twin single track subway tunnels by NATM within close proximity of existing vehicle underpass in the highly congested area of downtown Seoul, finite element analyses were performed to evaluate the ground responses during tunnelling and also the stability and safety of the underpass structure and subway tunnels. Results of the analyses indicated the need to improve the soil beneath the underpass, and pre-grouting was carried out prior to the tunnel excavation. During tunnel construction field measurement program was implemented to confirm the results of anslyses and to control the tunnel construction procedures, thus ensuring stability of the existing structres.

  • PDF

지하철 스퀼소음에 대한 실험적 연구 (An Experimental Study on the Squeal Noise for Subway)

  • 문경호;유원희;김재철
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 춘계학술대회논문집
    • /
    • pp.536-541
    • /
    • 2003
  • When a rail vehicle transverses tight curves, it often emits an intense, high-pitched squeal. This squeal has always been noticed as one of the most disturbing noise sources of railway systems. At present, w cannot predicted squeal noise that is influenced by a large number of dependent parameters. In this study, we performed structural analysis to find out the frequency of the wheel and measured squeal noise at Seoul subway. We also tested reduction effectiveness of squeal noise through rail lubricator

  • PDF

지하철 스퀼소음에 관한 연구 (A Study on the Squeal Noise for Subway)

  • 문경호;유원희;김재철
    • 한국철도학회논문집
    • /
    • 제6권3호
    • /
    • pp.209-214
    • /
    • 2003
  • When a rail vehicle transverses tight curves, it often emits an intense, high-pitched squeal. This squeal has always been noticed as one of the most disturbing noise sources of railway systems. At present, we cannot predict squeal noise that is influenced by a large number of dependent parameters. In this study, we performed structural analysis to find out the frequency of the wheel and measured squeal noise at Seoul subway. We also tested reduction effectiveness of squeal noise through rail lubricator.

GIS와 RS를 이용한 전철역의 영향권 분석 및 위치선정 (Location and Analysis on Effects of Subway Station using GIS and RS)

  • 양인태;천기선;박재국;오이균
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2003년도 추계학술발표회 논문집
    • /
    • pp.359-364
    • /
    • 2003
  • Population concentration phenomenon of city need large-scale ride, and ride is important urea that develop area and is armed surrounding land utilization. but, it is difficult to evaluate effect that ride gets land utilization change and community development as quantitative. Therefore, this research evaluates change and effect of land utilization as political to subway station that is main ride of Seoul City, and chose standard and position for right place arrangement of electric railway station. Research contents analyzed subway station effect area interior and external land utilization change taking advantage of GIS's buffer function and RS's classification technique, and decide precedence at subway station establishment and chose position of subway station for effect area outside area.

  • PDF

지하철 차량과 승강장의 연계공간에 대한 피난모델링 적용비교 (Comparison of Egress Modeling for the Connected Space from Subway Car to Platform)

  • 김종훈;서동훈;어득강;김운형;이덕희;정우성
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 춘계학술대회 논문집
    • /
    • pp.870-873
    • /
    • 2011
  • 철도 차량에서의 화재 발생 시 피난에서 차량에서 승강장이나 터널 같은 외부 환경은 매우 중요하다. 많은 인원이 탑승하게 되는 지하철과 그 승강장의 영향을 알아보기 위해, SIMULEX, PATHFINDER, STEPS를 시나리오에 적용 비교해 보았다. 대상차량은 서울에서 운행되는 차량을 기준으로 하였으며, 대상 승강장은 [도시철도 정거장 및 환승 편의시설 보완설계지침]을 기준으로 제작한 모델을 적용하였다.

  • PDF

지하철 운행에 의한 중량터널의 진동 (Vibration of Massive Tunnel Structure Induced by Subway Operation)

  • 김희철;신효근
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1995년도 봄 학술발표회 논문집
    • /
    • pp.114-121
    • /
    • 1995
  • Problems of noise and vibration induced by subway operation became one of the major factor when new subway 1 me is under consideration. One of the most economic method in reducing the noise and vibration is the increasement of the tunnel mass. . Vibration of the massive tunnel structure has been measured induced by subway operation. STEDEF system which was adopted by Seoul Metropolitan Subway Bureau has been proved that more than 99% of the vibration has been decreased at the bottom of the railway track. Most of the vibration measured inside and outside of the tunnel showed that their peak frequency is around SOHz or 100Hz. The propagation characteristics of vibration in massive tunnel , wave propagate in three directions. Overall frequency in the range of 0 to 125H2 horizontal transmission usually increase, while vertical transmission decreases about 50% in the range of 0 to 25Hz and 90Hz to 125Hz regardless of modal shape.

  • PDF

전동차 판토그라프 주습판 마모현상 분석에 관한 연구 (A Study on the Wearing Phenomenon Analysis of Phatograph Slider for the Subway Cars)

  • 김영규;양용준;원시태;최경진
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 춘계학술대회 논문집
    • /
    • pp.208-213
    • /
    • 2007
  • Pantograph is set on the roof of Subway. This plays the role of staying proper current on Subway when Subway is running or not. Pantograph includes Slider. Slider is most important part of Pantograph because this part is used to receive current from Contact Wire by dynamic interaction with Contact Wire. In general, material of Slider is steel, copper, or carbon alloy. Especially, SEOUL METRO uses Slider of sintered cualloy, but there is problem. This Slider causes over wearing during rainy season. We should reduce wearing between Contact Wire and Slider. Reducing this wear is most valuable technology in Subway system. I performed experiments to find out the best way that reduces the wear. I can find the best way as I change the rate of the alloy.

  • PDF

지하철의 섬식 정거장에 설치된 스크린도어에 가해지는 열차풍압 해석 (Analysis on the Train-wind Pressure applied to Screen Door in Island-type Platform of Subway)

  • 김정엽
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.138-141
    • /
    • 2008
  • The screen doors installed in the station of subway are subject to the train-wind pressure caused by the operation of trains. The train-wind pressure has to be correctly estimated for the design of safe structure of screen doors. As three-dimensional numerical flow analysis technology has been significantly developed, the analysis on the train-wind pressure with diverse variables such as train specifications, train speed, tunnel and station configurations, and blockage ratio can be effectively carried out with three-dimensional numerical method. In this study, computational analysis of train-induced wind in a subway tunnel employing the screen doors are carried out by using the three-dimensional numerical method with the model of the moving boundary for the run of trains. While the numerical analysis of train-wind pressure was applied on the one island-type station in the Seoul Subway Line 2, maximum pressure of 494 Pa was estimated on the screen door when two trains pass each other at the speed of 80km/h in the platform.

  • PDF

GIS와 RS를 이용한 전철역의 영향권 분석 (Analysis on Effects Area of Subway Station Using GIS and RS)

  • 양인태;김재철;천기선;박재국
    • 산업기술연구
    • /
    • 제23권A호
    • /
    • pp.93-100
    • /
    • 2003
  • Population concentration phenomenon of city needs large-scale ride, and It is important elements that develop the circumference but, it is difficult to evaluate effects that ride gets land utilization change. Therefore, this research evaluates change and effect of land utilization as political to subway station that is main ride of Seoul City, and chose standard and position for right place arrangement of electric railway station. Research contents analyzed subway station effect area interior and external land utilization change taking advantage of GIS's buffer function and RS's classification technique, and decide precedence at subway station establishment and chose position of subway station for effect area outside area.

  • PDF