• 한국통신학회논문지
• /
• 제33권12A호
• /
• pp.1261-1269
• /
• 2008

본 논문은 최근 표준화가 완성된 IEEE 1451.5 표준을 적용한 네트워크 접속가능한 응용프로세서(NCAP: network capable application processor)와 무선 트랜듀서 접속 모듈(WTIM:wireless transducer interface module)의 구현에 대한 연구이다. PC와 무선통신 모듈로 구성되는 NCAP부와, FPGA, 센서 보드., 무선 통신모듈로 구성되는 WTIM 부로 구성된다. NCAP부의 구현에는 C++ 언어가 사용되었고 WTIM 구현에는 FPGA를 이용하여 Verilog-HDL이 사용되었으며 NCAP과 WTIM과의 무선통신은 Zigbee를 이용하였으며 Zigbee의 기능구현을 위하여 nesC를 이용하였다. 본 논문에서는 NCAP과 WTIM은 IEEE 1451.0와 IEEE 1451.5 표준을 통하여 서로 통신 하도록 구현하였으며 표준에 근거하여 두 가지 실험을 실시하였다. 실험을 통하여 제안된 구조가 IEEE 1451.5 표준의 기능적인 부분을 효과적으로 수행하는 것을 검증하였다.

• 대한기계학회논문집B
• /
• 제29권3호
• /
• pp.322-329
• /
• 2005

The flow characteristics in the blade passage and in the wake region of a low speed axial flow fan have been investigated by experimental analysis using a rotating hot-wire sensor for design and off-design operating conditions. The results show that the tip leakage vortex is moved upstream when flow rate is decreased, thus disturbing the formation of wake flow near the rotor tip. The tip leakage vortex interfaces with blade pressure surface, and results in high velocity fluctuation near the pressure surface. From axial velocity distributions downstream of the fan rotor, large axial velocity decay near the rotor tip is observed at near stall condition, which results in large blockage compared to that at the design condition. Although the wake flow downstream of the rotor blade is clearly measured at all operating conditions, the trough of the high velocity fluctuation due to Karmann vortex street in the wake flow is mainly observed at a higher flow condition than the design flow rate.

• 대한인간공학회지
• /
• 제31권4호
• /
• pp.499-505
• /
• 2012

Objective: Research on the transformation of interaction between mobile machines and users through analysis on current gesture interface technology development trend. Background: For smooth interaction between machines and users, interface technology has evolved from "command line" to "mouse", and now "touch" and "gesture recognition" have been researched and being used. In the future, the technology is destined to evolve into "multi-modal", the fusion of the visual and auditory senses and "3D multi-modal", where three dimensional virtual world and brain waves are being used. Method: Within the development of computer interface, which follows the evolution of mobile machines, actively researching gesture interface and related technologies' trend and development will be studied comprehensively. Through investigation based on gesture based information gathering techniques, they will be separated in four categories: sensor, touch, visual, and multi-modal gesture interfaces. Each category will be researched through technology trend and existing actual examples. Through this methods, the transformation of mobile machine and human interaction will be studied. Conclusion: Gesture based interface technology realizes intelligent communication skill on interaction relation ship between existing static machines and users. Thus, this technology is important element technology that will transform the interaction between a man and a machine more dynamic. Application: The result of this study may help to develop gesture interface design currently in use.

• 한국통신학회논문지
• /
• 제33권5B호
• /
• pp.275-284
• /
• 2008

본 논문에서는 유비쿼터스 홈 네트워크의 제어 및 관리를 위해 JMX기반 관리 프레임워크를 설계하고 구현한다. 이를 위해 정보가전 기기와 센서 기기들로 구성되는 유비쿼터스 홈 네트워크 테스트 베드를 구축하고, 테스트 베드 상에서 관리 프레임 워크를 구현한다. 프레임워크는 홈 네트워크 환경에서 다양한 애플리케이션과 장비를 관리 및 제어할 수 있으며, 새로운 서비스를 쉽게 정의하고 추가 할 수 있다. 또한, 프레임워크는 멀티프로토콜을 기반으로 다양한 관리 인터페이스를 제공할 수 있을 뿐 아니라, 기존의 관리 시스템과의 통합이 용이한 구조를 가진다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.509-510
• /
• 2007

The Breakdown properties of epoxy composites are used for transformers and sensor, which has been studied. As a result, From the measurements of breakdown voltage, the more hardener is increased the stronger breakdown strength at low temperature because the ester of hardener is increased. Breakdown strength at the high temperature is decreased because the temperature at $110^{\circ}C$ is near at $T_g$. When the filler is added, between epoxy and silica is formed interface. Therefore the charge is accumulated in it, and the electric field is concentrated, and breakdown strength is decreased than non-filled specimens. In the case of specimens, the treated with silane, the breakdown strength becomes much higher since this is suggested that silane coupling agent has been improved chemical bonding in the interfaces and has been relaxed the electric filed concentration.

• The Plant Pathology Journal
• /
• 제37권3호
• /
• pp.291-298
• /
• 2021

False smut caused by Ustilaginoidea virens is an important rice fungal disease that significantly decreases its production. In the recent past, conventional methods have been developed for its detection that is time-consuming and need high-cost equipments. The research and development in nanotechnology have made it possible to assemble efficient recognition interfaces in biosensors. In this study, we present a simple, sensitive, and selective oxidized graphene-based geno-biosensor for the detection of rice false smut. The biosensor has been developed using a probe DNA as a biological recognition element on paper electrodes, and oxidized graphene to enhance the limit of detection and sensitivity of the sensor. Probe single-stranded DNA (ssDNA) and target ssDNA hybridization on the interface surface has been quantitatively measured with the electrochemical analysis tools namely, cyclic voltammetry, and linear sweep voltammetry. To confirm the selectivity of the device, probe hybridization with non-complementary ssDNA target has been studied. In our study, the developed sensor was able to detect up to 10 fM of target ssDNA. The paper electrodes were employed to produce an effective and cost-effective platform for the immobilization of the DNA and can be extended to design low-cost biosensors for the detection of the other plant pathogens.

• 센서학회지
• /
• 제32권6호
• /
• pp.425-431
• /
• 2023

An asymmetric metal-semiconductor-metal Al_0.24Ga_0.76N ultraviolet (UV) sensor was fabricated, and the effects of local Joule heating were investigated. After dielectric breakdown, the current density under a reverse bias of 2.0 V was 1.1×10^-9 A/cm², significantly lower than 1.2×10^-8 A/cm² before dielectric breakdown; moreover, the Schottky behavior of the Ti/Al/Ni/Au electrode changed to ohmic behavior under forward bias. The UV-to-visible rejection ratio (UVRR) under a reverse bias of 7.0 V before dielectric breakdown was 87; however, this UVRR significantly increased to 578, in addition to providing highly reliable responsivity. Transmission electron microscopy revealed interdiffusion between adjacent layers, with nitrogen vacancies possibly formed owing to local Joule heating at the AlGaN/Ti/Al/Ni/Au interfaces. X-ray photoelectron microscopy results revealed decreases in the peak intensities of the O 1s binding energies associated with the Ga-O bond and OH-, which act as electron-trapping states on the AlGaN surface. The reduction in dark current owing to the proposed local heating method is expected to increase the sensing performance of UV optoelectronic integrated devices, such as active-pixel UV image sensors.

• 한국콘텐츠학회논문지
• /
• 제10권8호
• /
• pp.73-83
• /
• 2010

본 논문에서는 ZigBee/IEEE 802.15.4 기반 무선 센서 네트워크와 TCP/IP 기반 네트워크를 서로 연결할 수 있는 웹-센서 게이트웨이의 아키택처를 제안한다. 제안한 게이트웨이의 주요 역할은 인터넷을 통하여 센서 노드에게 질의 또는 명령을 내리고 센서 데이터를 취득하도록 도와주는 기능이다. 다만, 인터넷과 센서 네트워크의 통신 프로토콜은 서로 불통함으로 양방향 프로토콜 변환이 필요하다. 본 논문에서는 이 변환 기능을 두 통신 프로토콜 APP 계층 위에 위치하도록 설계하여 인터넷 어프리케이션과 ZigBee 어프리케이션이 양 방향으로 변환 될 수 있도록 하였다. CGI 프로그램을 사용하여 변환 계층을 구현하였으며 인터넷의 사용자가 언제 어디서나 웹 페이지를 열어서 검색 요청이나 명령 등을 센서 노드에 전달할 수 할 수 있는 방식을 채택하였다. 이종 네트워크 연결을 위하여 TCP/IP 프로토콜을 센서 노드에 오버레잉 하는 기법도 가능하나 구현의 복잡성, 에너지 효율, 통신 오버헤드 측면에서 제한적이다. 부족한 자원을 가진 센서 노드 환경에서는 본 논문에서 제안한 변환 기반 웹-센서 게이트웨이 방식이 이종 통신 프로토콜 연결 문제를 해결하는 비교적 효과적이며 우수한 방법임을 확인하였다.

• 전기화학회지
• /
• 제21권4호
• /
• pp.80-87
• /
• 2018

웨어러블 디바이스, 전기자동차와 에너지저장시스템에 대한 전력 수요가 증가함에 따라 리튬이온 전지에 있어서 안전성은 가장 중요한 요소가 되었다. 이러한 문제를 해결하기 위해 가연성의 유기 액체전해질이 불연성의 고체전해질로 대체된 전고체 전지를 제조하려는 연구들이 진행되고 있다. 그러나 고체전해질은 자체 이온전도도가 상대적으로 낮고 전극/전해질 계면에서 높은 저항이 발생하므로 실질적인 활용에 제약이 있었다. 이에 유무기 소재로 구성된 복합전해질은 고체전해질의 단점을 극복할 수 있는 대안으로 떠오르고 있다. 본 연구에서는 PEO 전해질과 LLZO 고체전해질을 복합화하여 전해질을 제조하였고, LLZO 고체전해질 함량에 따라 결정성, 형상 및 전기화학 성능 분석을 진행하였다. 결과로부터 PEO 전해질 내에 LLZO 고체전해질의 최적 함량 및 균일한 분포가 전체 복합전해질의 이온전도도 향상에 중요한 요소임을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2577-2582
• /
• 2013

A novel stick-shaped portable sensing device featuring a microhole array interface between the polyvinylchloride-2-nitrophenyloctylether (PVC-NPOE) gel and water phase was developed for in-situ sensing of perchlorate ions in real water samples. Perchlorate sensitive sensing responses were obtained based on measuring the current changes with respect to the assisted transfer reaction of perchlorate ions by a perchlorate selective ligand namely, bis(dibenzoylmethanato)Ni(II) (Ni(DBM)2) across the polarized microhole array interface. Cyclic voltammetry was used to characterize the assisted transfer reaction of perchlorate ions by the $Ni(DBM)_2$ ligand when using the portable sensing device. The current response for the transfer of perchlorate anions by $Ni(DBM)_2$ across the micro-water/gel interface linearly increased as a function of the perchlorate ion concentration. The technique of differential pulse stripping voltammetry was also utilized to improve the sensitivity of the perchlorate anion detection down to 10 ppb. This was acquired by preconcentrating perchlorate anions in the gel layer by means of holding the ion transfer potential at 0 mV (vs. Ag/AgCl) for 30 s followed by stripping the complexed perchlorate ion with the ligand. The effect of various potential interfering anions on the perchlorate sensor was also investigated and showed an excellent selectivity over $Br^-$, $NO_2{^-}$, $NO_3{^-}$, $CO{_3}^{2^-}$, $CH_3COO^-$ and $SO{_4}^{2^-}$ ions. As a final demonstration, some regional water samples from the Sincheon river in Daegu city were analyzed and the data was verified with that of ion chromatography (IC) analysis from one of the Korean-certified water quality evaluation centers.