• 한국멀티미디어학회논문지
• /
• 제20권8호
• /
• pp.1357-1368
• /
• 2017

Sensor networks are used in various fields such as marine, defense, and smart home etc. Among the components of the sensor network, the sensor node collects sensor data, as one of the representative sensor network roles, and the sensor node makes a greate influence on the overall performance of the sensor network. Therefore, how to design the sensor node is an important issue in the sensor network field. However, the research on the sensor network architecture suitable for the sensor network installation environment has been made more important than the research on how to configure the sensor node. In this paper, we propose to identify elements to be considered for designing a sensor node that makes a large influence on the performance of the sensor network, and to easily implement the sensor node through the state transition model based on these elements.

• 센서학회지
• /
• 제16권4호
• /
• pp.247-253
• /
• 2007

Low power consumption sensor network platform (sensor node) for sensor networking with IEEE 802.15.4 protocol was fabricated. The sensor node used ceramic bar type antenna for increasing RF signal performance and decreasing PCB size occupied by antenna. The communication range of the fabricated sensor node was about $20{\sim}30$ m in open environment with 915 MHz frequency bandwidth and well supported by Tiny OS. The sensor node have good connectivity with various external devices by RS-232, I2C, analogue and digital expansion board, hence, this sensor node can be applied to various applications in wireless sensor network and ubiquitous sensor network.

• 전기학회논문지
• /
• 제59권7호
• /
• pp.1302-1308
• /
• 2010

In this study, Zigbee Sensor Node to transmit harmful gases CO and $CO_2$ information using wireless communication within the ground and underground structures were developed. Wireless communication protocol was used Zigbee Stack included IEEE 802. 15.4 MAC protocol. For wireless transmission of detected harmful gas signal from ADC of MCU was implemented Zigbee Sensor Node that was developed protocol using Serial-Port-Profile(SPP) here. The proposed Zigbee Sensor Node was verified transmission distance from experiments. Transmission distance was into 90m in experiments. Distance experiments were measured at 10m intervals using sine & pulse wave input signal at indoors. The proposed Route Sensor Node was applied mesh routing protocol. When built up USN(Ubiquitous Sensor Network)using Route Sensor Node, transmission distance was not limited. On the experimental results, harmful gas values between direct measurements and USN measurements were consistent. The semiconductor CO sensor and N-DIR $CO_2$ sensor module as a harmful sensor was used. Therefore, the proposed Zigbee Sensor Node was verified about reliability and validity to build USN for transmission of harmful gas information.

• 한국정보통신학회논문지
• /
• 제16권10호
• /
• pp.2224-2229
• /
• 2012

센서 데이터는 지속적으로 데이터 집합에 데이터가 삽입되기 때문에 데이터 검색을 위하여 연속 질의를 사용해야 한다. 연속 질의를 처리하기 위하여 각 센서 노드에서 질의 색인을 구축하고 질의 조건에 맞는 데이터를 전송하는 것이 필요하다. 그러나 모든 노드에 질의 조건을 전송하면 대량의 메시지가 발생하는 문제가 있다. 이 논문에서는 질의 조건 전송을 위한 메시지 횟수를 줄이기 위하여 센서노드선정 트리를 이용한 노드 선정 기법을 제안한다. 단말노드 엔트리는 각 센서 노드를 나타내며 센서 노드에서 발생하는 데이터의 영역을 정의한다. 질의가 발생하면 질의 조건과 겹치는 노드들이 선정되며 해당 노드로 질의 조건을 전송한다. 그리고 센서노드선정 트리를 구현하고 효율성을 실험하였다.

• 제어로봇시스템학회논문지
• /
• 제19권3호
• /
• pp.268-274
• /
• 2013

In this paper, the performance analysis of optics-based sensor node localization using ToF (Time of Flight) scheme is conducted. Generally, the position of the sensor node is calculated on the base station. And the base station scans neighboring sensor nodes with a laser. The laser which is reflected from one sensor node, however, can be reached to the base station at different angles according to the scanning resolution. This means that the error of the reached angle can increase and one node may be recognized as different nodes. Also the power of laser can decrease because the laser signal spread. Thus the sensor node which is located at a long distance from the base station cannot be detected. In order to overcome these problems which can be occurred in localization using ToF, the beam spot, the scanning resolution, the size of reflector and the power of laser at the sensor node were analyzed. It can be expected that the consequence of analysis can be provided in acquisition of accurate position of sensor node and construction of optics-based sensor node localization system.

• 한국인터넷방송통신학회논문지
• /
• 제8권4호
• /
• pp.1-8
• /
• 2008

최근에 대표적인 센서 노드 운영체계인 TinyOS를 이용하여 센서 네트워크를 개발하여 다양한 유비쿼터스 응용 서비스를 개발하고 있다. 이들 TinyOS 기반의 센서 네트워크에서는 상황 정보를 획득하기 위해 센서로부터 센싱된 정보의 전달과 수집을 집중적으로 수행한다. 이에 본 논문에서는 센서 노드의 전력 상태를 파악하여 이를 토대로 센서 노드를 수면, 활동, power off 모드로 전환하는 센서 노드 제어 알고리즘을 제시한다. 그리고 이 알고리즘을 토대로 센서 네트워크의 센서 노드, 싱크, 서버에서 센서 제어 모듈을 설계하고 구현한다. 이를 위하여 센서 노드의 센서 전력제어 모듈과, USN 서버의 센싱 데이터 수신 및 도시 모듈과 센서 제어 모듈을 설계하고 TinyOS와 자바 언어를 이용하여 구현한다. 이를 통하여 센서 노드의 전력 상태를 확인하여 데이터 수집이 어려울 경우 수면이나 power off 모드로 전환하여 전력 손실을 방지하고, 주변 환경이 정상적일 경우 활동 모드로 변경함으로써 효과적으로 센서 노드의 전력을 제어할 수 있을 것으로 사료된다.

• 디지털산업정보학회논문지
• /
• 제5권2호
• /
• pp.87-93
• /
• 2009

In this paper, we propose and evaluate the availability of single sensor node using a hierarchial modeling approach. We divides a sensor node into a software and hardware and analyze failures of each component. We construct Markov chains to represent the components of a sensor node, and then we construct a hierarchical model which use fault tree in upper level and Markov chains in lower level. We evaluate the availability and down of single sensor node.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (D)
• /
• pp.791-795
• /
• 2006

하이브리드 센서 네트워크에서 static sensor node들이 초기 배치된 후, coverage-hole을 결정하여, hole을 커버할 mobile sensor node들의 필요한 수 및 위치를 결정하고 배치하는 연구는 상당한 수준에 이르렀다. 그러나 mobile sensor node들을 호출하고 배치하는데 너무 많은 에너지를 소모하고 있다. 본 논문에서는 coverage-hole에서 mobile sensor node들을 호출하기 전에 mobile sensor node들을 최대한 coverage-hole에 가깝게 배치하여, 호출하는데 소요되는 에너지를 획기적으로 절감하였다.

• 대한임베디드공학회논문지
• /
• 제6권6호
• /
• pp.369-376
• /
• 2011

Since wireless sensor networks generally have the capability of network recovery, malfunction of a few sensor nodes in a sensor network does not cause a crucial problem paralyzing the sensor network. The malfunction of the sink node, however, is critical. If the sink node of a sensor network stops working, the data collected by sensor nodes cannot be delivered to the gateway because no other sensor nodes can take the place of the sink node. This paper proposes a TDMA-based wireless sensor network equipped with dual sink nodes, with a view to preventing data loss in the case of malfunction of a sink node. A secondary sink node, which synchronizes with a primary sink node and receives data from other sensor nodes in normal situations, takes the role of the primary sink node in the case of malfunction of the primary sink, thereby eliminating the possibility of data loss. The effectiveness of the proposed scheme is demonstrated through experiments.

• 한국컴퓨터정보학회논문지
• /
• 제24권4호
• /
• pp.169-176
• /
• 2019

Wireless sensor networks are used to monitor and control areas in a variety of military and civilian areas such as battlefield surveillance, intrusion detection, disaster recovery, biological detection, and environmental monitoring. Since the sensor nodes are randomly placed in the area of interest, separation of the sensor network area may occur due to environmental obstacles or a sensor may not exist in some areas. Also, in the situation where the sensor node is placed in a non-relocatable place, some node may exhaust energy or physical hole of the sensor node may cause coverage hole. Coverage holes can affect the performance of the entire sensor network, such as reducing data reliability, changing network topologies, disconnecting data links, and degrading transmission load. It is possible to solve the problem that occurs in the coverage hole by finding a coverage hole in the sensor network and further arranging a new sensor node in the detected coverage hole. The existing coverage hole detection technique is based on the location of the sensor node, but it is inefficient to mount the GPS on the sensor node having limited resources, and performing other location information processing causes a lot of message transmission overhead. In this paper, we propose an Adjacent Matrix-based Hole Coverage Discovery(AMHCD) scheme based on connectivity of neighboring nodes. The method searches for whether the connectivity of the neighboring nodes constitutes a closed shape based on the adjacent matrix, and determines whether the node is an internal node or a boundary node. Therefore, the message overhead for the location information strokes does not occur and can be applied irrespective of the position information error.