• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.7
• /
• pp.3213-3230
• /
• 2016

Sensor node (SN) is a crucial part in any remote monitoring system. It is a device designed to monitor the particular changes taking place in its environs. Wireless sensor network (WSN) is a system formed by the set of wirelessly connected SNs placed at different geographical locations within a target region. Precise placement of SNs is appreciated, as it affects the efficiency and effectiveness of any WSN. The manual placement of SNs is only feasible for small scale regions. The task of SN placement becomes tedious, when the size of a target region is extremely large and manually unreachable. In this research article, an automated mechanism for fast and precise deployment of SNs in a large scale target region has been proposed. It uses an assembly of rotating cannons to launch the SNs from a moving carrier helicopter. The entire system is synchronized such that the launched SNs accurately land on the pre-computed desired locations (DLs). Simulation results show that the proposed model offers a simple, time efficient and effective technique to place SNs in a large scale target region.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.946-949
• /
• 2006

With repeated coverage, spaceborne SAR (Synthetic Aperture Radar) instruments provide the most efficient means to monitor and study the changes in important elements of the marine environment. Due to highresolution of SAR data, the coverage of SAR sensor is always limited, especially for a repeat cycle. With more SAR sensors from various satellites, new data products such as ocean surface drift can be derived when two SARs' tracks overlap in a short time over coastal areas. Currently, there are two SAR sensors on different satellites with almost the exactly same path. That is, ERS-2 is following ENVISAT with a 30-minutes delay, which will be a good timing for ocean mesosclae feature tracking. For another application, a mystery ship near a big eddy with strong ship wake has been tracked between ERS-2 and ENVISAT SAR images to estimate its ship speed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.77-78
• /
• 2022

Currently, communication at sea is more difficult than communication at inland due to the movement of route signs by waves. This paper conducts research on relay transmission and reception techniques to extend coverage in uplink situations. The uplink maritime communication environment between inland base stations and buoys located a certain distance inland was viewed as two hops, and a beam generated according to the number of antennas was selected and a performance analysis was conducted considering the movement of buoys measured by sensors.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.176-184
• /
• 2011

As modern megalopolises become more complex and huge, convenience and safety of citizens are main components for a welfare state. In order to make safe society, telemetrics technology, which remotely measures the information of target system using electronic devices, is an essential component. In general, telemetrics technology consists of USN (ubiquitous sensor network) based on a wireless network, smart sensor, and SoC (system on chip). In the smart sensor technology, the following two problems should be overcome. Firstly, because it is very difficult for transducer manufacturers to develop smart sensors that support all the existing network protocols, the smart sensor must be independent of the type of networking protocols. Secondly, smart sensors should be modular so that a faulty sensor element can be replaced without replacing healthy communication element. To solve these problems, this paper investigates the feasibility of an IEEE 1451 based ZigBee smart sensor system. More specifically, a smart sensor for large network coverage has been developed using ZigBee for active telemetrics.

• Journal of Korea Multimedia Society
• /
• v.13 no.11
• /
• pp.1657-1666
• /
• 2010

Underwater wireless sensor networks (UWSN) need stable efficient data transmission methods because of environmental characteristics such as limited energy resource, limited communication bandwidth, variable propagation delay and so on. In this paper, we explain an enhanced hybrid transmission method that uses a hexagon tessellation with an ideal cell size in a two-dimensional underwater wireless sensor network model (2D) that consists of fixed position sensors on the bottom of the ocean. We also propose an energy efficient sensing and communication coverage method for effective data transmission in a three-dimensional underwater wireless sensor network model (3D) that equips anchored sensors on the bottom of the ocean. Our simulation results show that proposed methods are more energy efficient than the existing methods for each model.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.4
• /
• pp.158-168
• /
• 2009

As nation and society progresses, urban ground facilities and their management system get more complicated and the cost and effort to control the system efficiently grows exponentially. This study suggests to the deployment method of a sensor node by Wireless Sensor Network for controling the Urban Ground Facilities of National Facilities. First, we achieve the management facilities and method using the first analysis and then make the coverage of sensing and then set up the Sensor Node in Urban Ground Facilities. Second, we propose the solution way of repetition by the second analysis. And, we embody the GIS program by Digital Map and this method, we improve the reality by overlapping an aerial photo. Also we make an experience on the sensor node allocation using making program. we can remove the repetition sensor node about 50%, and we can confirm that the sensor nodes are evenly distributed on the road.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.990-1013
• /
• 2015

Deploying sensors into a target region is a key issue to be solved in building a wireless sensor network. Various deployment algorithms have been proposed by the researchers, and most of them are evaluated under the ideal conditions. Therefore, they cannot reflect the real environment encountered during the deployment. Moreover, it is almost impossible to evaluate an algorithm through practical deployment. Because the deployment of sensor networks require a lot of nodes, and some deployment areas are dangerous for human. This paper proposes a deployment approach to solve the problems mentioned above. Our approach relies on the satellite images and the Virtual Force Algorithm (VFA). It first extracts the topography and elevation information of the deployment area from the high resolution satellite images, and then deploys nodes on them with an improved VFA. The simulation results show that the coverage rate of our method is approximately 15% higher than that of the classical VFA in complex environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.5
• /
• pp.1929-1950
• /
• 2020

Reliable and secure data transmission in the application environment assisted by the wireless sensor network is one of the major challenges. Problem like blind forwarding and data inaccessibility affect the efficiency of overall infrastructure performance. This paper proposes routing protocol for forwarding and error recovery during packet loss. The same is achieved by energy and hops distance-based formulation of the routing mechanism. The reachability of the intermediate node to the source node is the major factor that helps in improving the lifetime of the network. On the other hand, intelligent hop selection increases the reliability over continuous data transmission. The number of hop count is factor of hop weight and available energy of the node. The comparison over the previous state of the art using QualNet-7.4 network simulator shows the effectiveness of proposed work in terms of overall energy conservation of network and reliable data delivery. The simulation results also show the elimination of blind forwarding and data inaccessibility.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.395-398
• /
• 2006

최근 Robomote, Robotic Sensor Agents(RSA)와 같은 이동 센서의 등장으로 인해 이동 센서네트워크(MSN: Mobile Sensor Network)에 대한 연구가 활발히 진행되고 있다. 하지만 기존의 이동 센서네트워크에 대한 연구는 주로 기존의 고정 센서네트워크(SSN: Stationary Sensor Network)에서 발생하는 문제점인 coverage hole을 해결하는데 초점을 맞추고 있다. 이러한 연구들에서는 이동 센서들에게 부여된 이동 능력을 최대한 활용하지 못하는 단점을 안고 있다. 이를 해결하기 위해 이동 센서에게 지속적인 이동성을 부여함으로써 고정 센서네트워크에 비해 더 넓은 영역을 센싱하도록 제안한 연구가 있으나, 그 연구가 아직 초기 단계로써 이동 센서의 지속적인 이동으로 인한 싱크 노드로의 통신 경로 설정 및 데이터 전송 문제에 대해서는 논하고 있지 않다. 이에 본 논문에서는 지속적인 이동성을 갖는 이동 센서로 구성된 이동 센서네트워크 환경에서 효율적으로 경로 설정 및 데이터 전송을 가능하게 하는 통신 프로토콜을 제안한다. 제안하는 프로토콜에서는 이동 센서와 함께 고정 센서를 배치함으로써 고정 센서가 이동 센서를 대신하여 싱크 노드로 센싱 데이터를 전송하도록 한다. 시뮬레이션을 이용한 성능 평가를 통해 제안한 통신 프로토콜이 기존의 고정 센서네트워크에 비해 센싱 영역 성능에서 우수함을 보여준다.

• Journal of Hydrogen and New Energy
• /
• v.3 no.2
• /
• pp.17-24
• /
• 1992

Hydrogen gas sensors were fabricated after the form of metal/insulator/semiconductor(MIS) structure on a p-type silicon wafer and a insulating layer (silicon dioxide) thickness was changed from $500{\AA}$ to $5000{\AA}$. Their electrical properties were investigated with the variation of the hydrogen gas concentration at room temperature. At the applied forward bias of lV to both ends of Pd-MIS sensors the current was decreased logarithmically with the increase of hydrogen concentration in air. In the case of a thin $SiO_2$ layered ($500{\AA}$) sensor the current ratio was decreased to 25 % at 1 % of hydrogen concentration in air and 50% for a thick $SiO_2$ layered ($5000{\AA}$) sensor. And the response time of the thick insulating layered sensor to 1% hydrogen containing air was about 50 seconds and regeneration time was 2.5 minutes. When a 0.5mA current was appied to the thick insulating layered sensor the maximun voltage shift was calculated to 0.8V in the case of ${\theta}$ = 1 and the Pd surface coverage of hydrogen was increased logarithmically with hydrogen partial pressure.