• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.372-379
• /
• 2003

The problems encountered by ultrasonic testing of austenitic stainless steel weld joints are discussed in the paper. Due to low thermal conductivity and the occurrence of single phase between the melting point and the room temperature, coarse and oriented grains are formed in such weld metals more in thick sections. This leads to higher scattering at the grain boundaries and low signal to noise ratio, and extensive beam skewing. Experimental results to understand these problem are explained.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.21 no.4
• /
• pp.1-9
• /
• 1984

This study is concerned with the economic aspects of $125,000m^3$ class LNG carriers with different propulsion plant such as conventional steam turbine and slow speed diesel engine with reliquefaction plant. The ship's speed and L/B ratio were optimized with criterion of required freight rate(RFR) by using the PROCAL computer program package. In order to investigate the effect of fuel oil price, round trip distance and boil-off rate on the RFR and the optimum speed, sensitivity analysis were also performed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1992.03a
• /
• pp.83-102
• /
• 1992

As shear localization is observed in different deformation modes, an attempt is made to understand the conditions for shear localization in general deformation modes. Most emphasis in put upon the effects of pre-localization deformation mode on the onset of shear localization and all the other well-recognized effects of subtle constitutive features and imperfection sensitivity studied elsewhere are not investigated here. Rather, an approximate perturbation stability analysis is performed for simplified isotropic rigid-plastic solids subjected to general mode of homogeneous deformation. Shear localization is possible in any deformation mode if the material has strain softening. The incipient rate of shear localization and shear plane orientations are strongly dependent upon the pre-localization deformation mode. Significant strain softening is necessary for shear localization in homogeneous axisymmetric deformation modes while infinitesimal strain softening is necessary for shear localization in plane strain deformation mode. In any deformation mode, there are more than one shear plane orientation. Except for homogeneous axisymmetric deformation modes, there are two possible shear plane orientations with respect to the principal directions of stretching. Some well-known examples are discussed in the light of the current analysis.

• Korean Journal of Metals and Materials
• /
• v.48 no.9
• /
• pp.791-797
• /
• 2010

The creep crack growth rate (da/dt) of the Cr-Mo steels tested by pre-crack and the voltage (or resistance) variables were related into fracture parameter (Ct), crack growth coefficient (H), and an exponent (q) in the parts of Base, weld and HAZ. The fracture parameter (Ct) has various variables relating to the specimen and crack shape, applied stress, and creep strain curve. The H and q was inferred by OLS regression (ordinary least square method), and the H values were solved in statistics and probability assessment, which were attained fromPDF's distributions (probability density function). The HAZ part has the highest value of q by OLS regression and the widest distribution of H by PDF of WEIBULL, which means that the crack sensitivity of HAZ should be cautioned against the creep crack growth and failure.

• Environmental Analysis Health and Toxicology
• /
• v.19 no.2
• /
• pp.141-151
• /
• 2004

We exposed juvenile puffer fish, Takifugu obscurus(30 days after hatching) to various aqueous pollutants including 4 kinds of inorganic metals (Ag, Cd, Cu and Hg), 2 organotin compound.; (tributyltin ［TBT］ and triphenyltin［TPhT］) and 5 polycyclic aromatic hydrocarbon (PAH) compounds (chrysene, fluoranthene, naphthalene, phenanthrene and pyrene) to estimate median lethal concentrations (LC50s) of each pollutant after the 96-hour acute exposure. Among the inorganic metals, Hg (52 $\mu\textrm{g}$/L; 96-h LC50) was most toxic to test animals and followed by Ag (164 $\mu\textrm{g}$/L), Cu (440 $\mu\textrm{g}$/L) and Cd (1180 $\mu\textrm{g}$/L). Aqueous TBT was more toxic between the two organotins; the 96-h LC50 for TBT (5.1 $\mu\textrm{g}$/L) was 3 times lower than that of TPhT (17.3 $\mu\textrm{g}$/L). The acute toxicity of PAH compounds was highest for chrysene (1.5 $\mu\textrm{g}$/L; 96-h LC50) and decreased in the order of pyrene (65 $\mu\textrm{g}$/L) > fluoranthene (158 $\mu\textrm{g}$/L) > phenanthrene (432 $\mu\textrm{g}$/L) > naphthalene (8690 $\mu\textrm{g}$/L). The toxicity of PAH compounds wat closely related to their physico-chemical characteristics such as $K_{ow}$ and water solubility, and well explained by simple QSAR relationship. The sensitivity of puffer fish to various inorganic and organic pollutants was generally comparable to various fish species widely used as standard test species in previous studies and further evaluation should be conducted to develop adequate testing procedure for T. obscurus when used in various toxicity tests.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.127-130
• /
• 1991

A magnetic levitation system with hybrid magnets, which is composed of permanent magnets and electromagnets, consumes less power than the conventional attraction type system. A parallel complementary controller on the lift controller is proposed to reduce the sensitivity for parameter variation and force disturbance. Simulation and experiment show that the lift system has robustness to force disturbance.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.9
• /
• pp.46-49
• /
• 1999

By attaching two metals with different thermal expansion coefficients to a fiber Bragg grating, we show that the temperature sensitivity is successfully improved to 3.3 times that of bare fiber Bragg grating and controlled by changing the metal length.

• Environmental Analysis Health and Toxicology
• /
• v.14 no.4
• /
• pp.135-144
• /
• 1999

Environmental toxicities of priority water pollutants were evaluated by two selected bioassays, Lettuce seed germination/elongation test and Microtox acute toxicity test. Toxic chemicals (heavy metals, polycyclic aromatic hydrocarbons, and phenolic compounds) inhibited the germination rate and root elongation of Lettuce seed, as well as the bioluminescence of Microtox bacteria. When test biota were exposed to target chemicals, the sensitivity of Lettuce bioassay was relatively lower than that of Microtox bioassay. However, Lettuce bioassay may be a good candidate for prescreening the environmental toxicities of priority water pollutants, since the testing method with Lettuce seed was relatively easier and more economic than with Microtox bacteria. Toxicity tests were conducted to compare the validity and sensitivity of both bioassays for sediment from a small stream passed through urban area as well as leachate from a municipal solid waste landfill. From experimental results, we found that Lettuce test and Microtox test are compensated each other as a battery of bioassay for evaluating the environmental toxicities of field samples obtained from a small stream contaminated by pollutants.

• Fisheries and Aquatic Sciences
• /
• v.9 no.1
• /
• pp.38-43
• /
• 2006

We developed and evaluated a method of short-term acute toxicity testing based on the feeding behavior of Ceriodaphnia dubia. In prior toxicity tests, neonates of C. dubia were hatched and cultivated with the addition of yeast only for the preparation of the transparent daphnid's gut. Scenedesmus subspicatus was supplied as food after 1 to 6 h of exposure to toxicants. The effects of 1-h and 6-h exposure time on test sensitivity did not significantly differ. A comparison of the short-term l-h acute toxicity test developed in this study to the standard 48-h acute toxicity test using heavy metals, cyanide, and pentachlorophenol indicated that the 1-h test provided an acceptable sensitivity level in toxicity testing of C. dubia..

• Journal of Microbiology and Biotechnology
• /
• v.28 no.2
• /
• pp.323-329
• /
• 2018

In Escherichia coli, the transcription of genes related to metal homeostasis is activated by the presence of target metals. The promoter regions of those genes can be fused with reporter genes to generate whole-cell bioreporters (WCBs); these organisms sense the presence of target metals through reporter gene expression. However, the limited number of available promoters for sensing domains restricts the number of WCB targets. In this study, we have demonstrated an alternative method to generate novel WCBs, based on the notion that since the sensing mechanisms of WCBs are related to metal transportation systems, their properties can be modulated by disrupting metal homeostasis. Mutant E. coli strains were generated by deleting the znt-operon genes zntA, which encodes a zinc-export protein, and zntR, which encodes a znt-operon regulatory protein, to investigate the effects on the metal-sensing properties of WCBs. Deletion of zntA increased the sensitivity but abolished the selectivity of cadmium-sensing WCBs, whereas arsenic-sensing WCBs gained sensitivity toward cadmium. When zntR was deleted, cadmium-sensing WCBs lost the ability to detect cadmium, and this was recovered by introducing exogenous zntR. In addition, the metal-binding site of ZntR was genetically engineered to modulate metal selectivity. This study provides a valuable platform for the development of novel E. coli-based WCBs.