• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.187-197
• /
• 2004

The purpose of this paper is to investigate economic feasibility of manganese nodules in Korea area (Clarion-Clipperton Fracture Zone). We assumed that the production scale of manganese nodules were 3.0MT or 1.5MT and analyzed that the capital cost and operating cost were estimated in the four sectors, exploration, mining, transportation and metallurgical process. The capital cost and operating cost evaluation reflects the latest technical practices. First, for analyzing economic feasibility, the scenario suggests that the production of 4 metals can be made for 25 years. Assuming the discount rate at 8.0%, equity capital at 50% and tax at 27%. When manganese nodule were mininged 3.0 MT, economic feasibility analyses showed that IRR was 12.8 and pay-back period was 9.2 years, and when manganese nodules were mininged 1.5 MT, economic feasibility analyses showed that IRR was 4.0 and pay-back period was 11.8 years. This study indicated there is economic validity of at the product of manganese nodules 3.0 MT. In addition, we carried out a sensitivity analysis at the change of cobalt price on mining 1.5 MT. The result of sensitivity analysis clearly showed that economic validity is high at increasing of cobalt price 50% up.

• Journal of Sensor Science and Technology
• /
• v.6 no.4
• /
• pp.274-279
• /
• 1997

NOx sensors using tungsten oxide films as a base material were prepared and their electrical and sensing characteristics have been investigated. The $WO_{3}$ thick films doped with $SnO_{2}$ or $TiO_{2}$ showed higher sensitivity and better sorption characteristics to NOx gas than the pure $WO_{3}$ films material in air at operating temperature of $400^{\circ}C$. By addition of noble catalysts, such as Ru or Au, to the $TiO_{2}-WO_{3}$ thick films, their sensitivity, recovery and selectivity to NOx gas were found to be more enhanced.

• Journal of the Korean Institute of Gas
• /
• v.13 no.2
• /
• pp.23-29
• /
• 2009

This study investigated sensitivity of the gas sensor to chemical weapons with the sensor material doped with catalysts. The nano-sized SnO2 powder mixed with metal oxides (TiO2) was doped with transition metals(Pt, Pd and In). Thick film of nano-sized SnO2 powder with TiO2 was prepared by screen-printing method onto Al2O3 substrates with platinum electrode and chemical precipitation method. The physical and chemical properties of sensor material were investigated by SEM/EDS, XRD and BET analyzers. The measured sensitivity to simulant toxic gas is defined as the percentage of resistance of value equation, [(Ra-Rg)/$Ra\;{\times}100$)], that of the resistance(Ra) of SnO2 film in air and the resistance(Rg) of SnO2 film in acetonitrile gas. The best sensitivity and selectivity of these thick film were shown with 1wt.% Pd and 1wt.% TiO2 for acetonitile gas at the operating temperature of $250^{\circ}C$.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.1
• /
• pp.93-100
• /
• 2012

In this paper, the deterministic optimal design for the tail plane made of composite materials is conducted under the deterministic loading condition and compared with that of the metallic materials. Next, the reliability analysis with five random variables such as loading and material properties of unidirectional prepreg is conducted to examine the probability of failure for the deterministic optimal design results. The MATLAB programing is used for reliability analysis combined with FEA S/W(COMSOL) for structural analysis. The laminated composite is assumed to the equivalent orthotropic material using classical laminated plate theory. The response surface methodology and importance sampling technique are adopted to reduce computational cost with satisfying the accuracy in reliability analysis. As a result, structural weight of composite materials is lighter than that of metals in deterministic optimal design. However, the probability of failure for the deterministic optimal design of the tail plane structures is too high to be neglected. The sensitivity of each variable is also estimated using probabilistic sensitivity analysis to figure out which variables are sensitive to failure. The computational cost is considerably reduced when response surface methodology and importance sampling technique are used. The study of the computationally inexpensive method for reliability-based design optimization will be necessary in further work.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.3
• /
• pp.22-26
• /
• 2019

With an increasing potential to realize quantum computer, it has recently been an important issue to extend the capabilities of RF cavities to maintain longer coherent quantum system. Using superconductors instead of normal metals allows the quantum system to have a substantially enhanced quality factor. In this paper, surface impedances of superconducting cavities are calculated by the Mattis-Bardeen theory with Python & MATLAB programs. With a simulation of electromagnetic field distribution, the sensitivity to dielectric and surface losses of the superconducting cavities are determined. Then calculations of the resonance frequency and quality factor of three-dimensional superconducting resonators made of Al or Nb are discussed.

• International Journal of Automotive Technology
• /
• v.6 no.4
• /
• pp.413-419
• /
• 2005

The United States automotive recycling infrastructure has successfully reduced the amount of automotive waste sent to landfills, especially since the introduction of shredders in the late 1950s. Shredders are necessary to process and recycle automotive hulks and other durable goods. However, this industry faces significant challenges as the automotive manufacturers are increasing the use of nonmetallic components which are difficult to recycle. Additionally, it is becoming obvious that automobiles contain hazardous materials which place heavy burdens on the environment. To address this growing concern, we propose a process planning model for automotive shredders to make tactical decisions regarding at what level to process and at what level to reprocess feed stock materials. The purpose of this paper is to test analytical models to help shredders improve the profitability and efficiency of the bulk recycling processes for end of life automobile returns. The work is motivated by an actual recycling problem that was observed at Capitol City Metals shredding facility in Indianapolis, Indiana.

• 전기의세계
• /
• v.17 no.2
• /
• pp.16-26
• /
• 1968

Cds is possible to add excess donors and to compensate partially using other group metals as acceptors. The impurities can ble incorporated either during crysta growth or by diffusion into a bulkcrystal. The addition of rimpurities leads also to the production of vacancies in a manner depending on the atmosphere surrounding the crystal during growth, during the diffusion process or using bulk. Cds of the mentioned above affects spectral sensitivity, speed of response, the variation on photocurrent, electron life time, and decay of photoconductivity with temperature and with intensity of illumination. In the work to be deseribed, these properties have been studied between liquid nitrogen and room temperature. In addition, the electron trap distribution has been correlated with speed of response, variation of photocurrent with temperature in various atmosphere. Four major trapping levels have been observed, and their identification with impurity and vacancy levels is discussed. And also the effects of lattice imperfections on the photoconductive properties CdS were investigated in detail.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.954-956
• /
• 1993

This paper describes the process of levitation melting of metals in an axisymmetric induction heating system. This process has advantages of low heat losses, heating with short times and clean operating conditions. The shape of molten metal is determined using sensitivity analysis and optimization technique. Electromagnetic, gravitational and surface tension energies are considered, and these energies are used as an objective function in optimization process. Electromagnetic field are calculated using the finite element method. The fact that volume is constant in the process is also considered as an equality constraint.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.623-624
• /
• 2006

The behavior of hardmetals under cyclic loads is investigated. Unnotched specimens were employed to obtain practical information regarding fatigue in hardmetals. All the tested hardmetals exhibit an increase in the number of cycles until failure with a decrease in the maximum stress, i.e., the hardmetals exhibit a high fatigue sensitivity. The fatigue strength increases with the cobalt content. Although distinct fatigue limits, as observed in metals, cannot be observed, the calculated fatigue limit stress at $10^7$ cycles is found to be approximately 70% of the flexural strength, and the stress value exhibits a linear relationship with the flexural stress.

• Korean Journal of Hydrosciences
• /
• v.2
• /
• pp.61-68
• /
• 1991

This study assessed the contribution of heavy metals to total toxicity as well as the presence other toxic compounds before and after adding the chemical P to concurrently conducted bioassay tests of Daphnia magna and P. Phosphoreum. The following conclusions were drawn from this study : With excessive EDTA dosage, a toxicity reduction in Microtox would occur due to a metal-comples being formed. Microtox was far less sensitive than D. magna to heavy metal toxicity, but extended exposure time and reagent could increase the sensitivity.