• 한국공작기계학회논문집
• /
• 제17권6호
• /
• pp.49-55
• /
• 2008

Arc welding process is one of the most important technologies to join metal plates. Robotic welding offers the reduced manufacturing cost sought, but its widespread use demands a means of sensing and correcting for inaccuracies in the part, the fixturing and the robot. A number of problems that need to be addressed in robotic arc welding processes include sensing, joint tracking, and lack of adequate models for process parameter prediction and quality control. Problems with parameter settings and quality control occur frequently in the GMA(Gas Metal Arc) welding process due to the large number of interactive process parameters that must be set and accurately controlled. The objectives of this paper are to realize the mapping characteristics of bead width using a sensitivity analysis and develop the neural network and multiple regression method, and finally select the most accurate model in order to control the weld quality(bead width) for fillet welding. The experimental results show that the proposed neural network estimator can predict bead width with reasonable accuracy, and guarantee the uniform weld quality.

• 수산해양교육연구
• /
• 제19권2호
• /
• pp.278-287
• /
• 2007

Since traffic congestion ratio at any given port fluctuates on the number of arriving and departing vessels, the total tonnage of freight volume being handled, and the number of berth in operation and other factors, there exists a need to numerically analyze the waterway traffic volume. However, there are no effective regulations in regards to the waterway traffic analysis prior to expansion of a port facility. The current analysis requires the traffic analysis in relation only to the width of the waterway, which clearly falls short of achieving a comprehensive evaluation study that could be used in consideration of port expansion.This study provides five scenarios to execute a comprehensive evaluation study and base for the sensitivity study by analyzing the scenarios. As a result of the sensitivity analysis, the A, B, and C scenarios varies the average arrival ratio of the berth shows 1.1, 1.19, and 1.28 times of delays respectively. Also, The D and E scenarios take place malfunctions of pier shows 1.21 and 1.53 times of delays respectively. Therefore, various strategies of harbor development and method of harbor management are needed for the flexible correspondence to the environmental changes such as the excessive increasing of the freight volume and often taking place of malfunctioning.

• 한국자기학회지
• /
• 제6권3호
• /
• pp.189-193
• /
• 1996

Magnetoresistance field sensitivity and magnetostriction were measured as a function of annealing temperature for NiFe/Ag multilayer systems displaying giant magnetoresistance. Key multilayer configurations such as number of NiFe/Ag bilayers and Ag spacer thickness were varied. A high giant magnetoresistance ratio up to 5% with zero magnetostriction and high magnetoresistance field sensitivity was possible to achieve simultaneously with optimal sample geometry and annealing condition.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.571-574
• /
• 2007

The purpose of this research is to analyze sensitivities on hydraulic characteristic factors of bridge and culvert causing flood water level rising. With HEC-RAS and RMA2 models, analysis of backwater due to bridge and culvert in an ideal stream was carried out. The results of hydraulic modeling and sensitivity analysis indicated that the opening ratio and the Froude number were the most sensitive factors and other factors were not quite sensitive to flood water level rising.

• Smart Structures and Systems
• /
• 제21권6호
• /
• pp.761-776
• /
• 2018

Guided wave testing is a reliable and safe method for pipeline inspection. In general, guided wave testing employs a circumferential array of piezoelectric transducers to clamp on the pipe circumference. The sensitivity of the operation depends on many factors, including transducer distribution across the circumferential array. This paper presents the sensitivity analysis of transducer array for the circumferential characteristics of guided waves in a pipe using finite element modelling and experimental studies. Various cases are investigated for the outputs of guided waves in the numerical simulations, including the number of transducers per array, transducer excitation variability and variations in transducer spacing. The effect of the dimensions of simulated notches in the pipe is also investigated for different arrangements of the transducer array. The results from the finite element numerical simulations are then compared with the related experimental results. Results show that the numerical outputs agree well with the experimental data, and the guided wave mode T(0,1) presents high sensitivity to the notch size in the circumferential direction, but low sensitivity to the notch size in the axial direction.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1478-1485
• /
• 1993

본 연구에서는 압축 성형다이 가열선의 최적위치를 결정하는 문제를 다이의 형상 최적설계 문제로 정식화하고자 한다. 최적화 문제의 목적은 다이 내면의 온도를 지정된 온도로 균일하게 유지하는 것이다. 또한 Lee, Choi와 Kwak의 형상 설계 민감 도 해석을 위한 직접 미분 방법을 응용하여 가열선 위치변화에 관한 민감도 계산을 위한 경계 적분 방정식을 유도하고, 경계요소법으로 온도와 온도의 민감도를 해석하고 자 한다. 수치적 응용의 예로서, 넓은 평판의 성형을 위한 압축 성형다이의 가열선의 최적위치를 결정하는 문제를 다루고, 최적위치에서 가열선의 개수가 온도의 균일성에 미치는 영향을 검토한다.

• 동아시아식생활학회지
• /
• 제26권2호
• /
• pp.117-124
• /
• 2016

As the number of cafeterias at universities has increased, studies on student perception of price sensitivity at cafeterias have gained increased attention. Therefore, the study investigated the relationship between students and university cafeterias according to price sensitivity measurement (PSM). According to the analysis, the indifference price (IDP) was 3,444.06 Korean Won while the subsequent cumulative distribution percentage was approximately 17.68%. The optimal pricing point (OPP) was 3,233.73 Korean Won and the stress price (IDP-OPP) was 210.33 Korean Won. The point of marginal expensiveness (PME) was 4,602.24 Koean Won and the point of marginal cheapness (PMC) was 2,036.29 Korean Won. Therefore, the range of acceptable prices (RAP) was established as 2,565.95 Korean Won. In addition, the study examined differences between price sensitivity measurement (PSM) for the respondent subgroups. Hence, the results will provide a practical background for development of business plans for university cafeterias.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.560-568
• /
• 1998

Recently to develop an automobile with better properities many researches and investments have been executed. In this paper we intend to improve the automobile properties by reducing the weight of the engine without changing the dynamic characteristics. At first the vibration analysis by the Substructure Synthesis Mehtod and the exciting test of the engine model performed to confirm the reliability of the analyzing tools. And the weight minimiza-tion is performed by the Sensitivity Analysis and the Optimum Structural Modificationl. To decrease the engine weight ideally the weight of the parts with the low sensitivity is to cut mainly and the changing quantity of the natural frequency by the cut is to be recovered by the weight modification of the parts with the high sensitivity. As actually the mathematical unique solution for the homogeneous problem(i. e. 0 object func-tion problem)does not exist we redesign the engine block with much thinner initial thickness and recover the natural frequencies and natural modes of original structure by the sensitivity analy-sis and then observe the Frequency Response Function(FRF) for the interesting points. In this analysis the original thickness of the engine model is 8mm and the redesigned initial thicknesses are 5mm and 6mm, And the number of the interesting natural frequencies are 1, 2, 3, 4 and 5 respectively.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2007-2016
• /
• 2011

In this paper, a new algorithm for alleviating overloads in power networks by the use of line power tracing and sensitivity is proposed to perform line switching and bus separation effectively. Also, a new bus separation index based on line power tracing is presented to find the bus to be separated for relieving overloads effectively. By applying the sensitivity of the line flow with respect to the change of the line impedance, both switching-on and switching-off of the lines for alleviating overloads in power networks are performed systematically at once. The number of the considered cases for line switching and bus separation can be greatly reduced and the best combination of line switching and bus separation can be acquired efficiently by the use of the sensitivity and the bus separation index. In order to show the effects of this algorithm, it is applied to a small scale power system of IEEE 39-bus system and practical power systems of KEPCO.

• 대한산업공학회지
• /
• 제37권2호
• /
• pp.83-88
• /
• 2011

The effects of the moments of the retrial time to the system performance measures such as blocking probability, mean and standard deviation of the number of customers in service facility and orbit are numerically investigated. The results reveal some performance measures related with the number of customers in orbit can be severely affected by the fourth or higher moments of retrial time.