• 소성∙가공
• /
• 제12권8호
• /
• pp.693-701
• /
• 2003

In this paper, the influence of frictional conditions on the backward impact extrusion of aluminum battery casing with large aspect ratio has been investigated. In the simulation, MSC.Superforge, a package based on the finite volume method, is used for the extrusion analysis. The formability and earing problem during the production have been evaluated by studying the sensitivity to frictional effects. During the sensitivity analysis, the friction factor was varied from 0.02 to 0.24. As the friction factor is increased, the forming height of the narrow edge is decreased, and the forming height of the wide edge is increased. When the friction factor becomes 0.2, the earing problem does not occur The experimental results show a good agreement with analytical results.

• 센서학회지
• /
• 제30권3호
• /
• pp.131-138
• /
• 2021

The optimization of the specifications of vertical silicon on insulator (SOI) slot optical waveguides suitable for integrated-optical biochemical sensors was performed through computational analysis of the confinement factor of the guided mode distributed in the slot in addition to analytical examination of the TE mode. The optimized specifications were confirmed based on sensitivity in terms of the change in the refractive index of the biochemical analyte. When the slot width, rail width, and height were set to 120 nm, 200 nm, and 320 nm, respectively, the confinement factor was evaluated to be about 56% and the sensitivity was at least 0.9 [RIU/nm].

• 복식문화연구
• /
• 제22권3호
• /
• pp.411-430
• /
• 2014

The purpose of this study is to identify the antecedents and consequence of role-relaxed consumption. Consumption-related variables were considered as antecedents, and fashion-related variable was considered as a consequence. Hedonic consumption, impulse buying, value consciousness, and brand sensitivity were included as consumption-related variables and fashion consciousness was included as a fashion-related variable. It was hypothesized that hedonic consumption, impulse buying, value consciousness, and brand sensitivity influence rolerelaxed consumption and then influence fashion consciousness. Data were gathered by surveying university students in Seoul, using convenience sampling. Two hundred twenty seven questionnaires were used in the statistical analysis, exploratory factor analysis using SPSS and confirmatory factor analysis and path analysis using AMOS. While hedonic consumption, impulse buying, value consciousness, and brand sensitivity were uni-dimensions, role-relaxed consumption and fashion consciousness were multi-dimensions. Factor analysis of role-relaxed consumption revealed two dimensions, 'self-centered decision making' factor and 'importance of intrinsic value' factor. In addition, factor analysis of fashion conscious revealed three dimensions, 'individualism' factor, 'dressing style' factor, and 'appearance' factor. Tests of the hypothesized path show that impulse buying and brand sensitivity negatively influence 'self-centered decision making' and that hedonic consumption and value consciousness negatively influence 'importance of intrinsic value'. While 'self-centered decision making'negatively influence 'dressing style' and 'appearance, 'importance of intrinsic value' negatively influences all factors of fashion consciousness. The implications of these findings and suggestions for future study are also discussed.

• 한국항공우주학회지
• /
• 제47권6호
• /
• pp.438-445
• /
• 2019

본 논문에서는 MEMS 자이로스코프에서 발생하는 G-민감도 오차를 관성센서 오차 모델에 정의하고, 이를 분석하여 오차 성분을 추출하는 기법을 제안한다. 일반적으로 MEMS기반 자이로스코프는 스프링과 관성질량체를 갖는 진동형 방식으로 개발된다. 따라서 구조적으로 고기동 환경에서 인가되는 가속도에 비례하는 G-민감도 오차 특성을 갖게 된다. 이러한 G-민감도 오차는 외부에서 높은 가속도가 인가되지 않는 민수분야에서는 무시할 정도로 작다. 하지만 전술급 성능의 MEMS 관성측정기가 고가속 환경에서 외란과 가속도에 의해 G-민감도 오차가 발생하게 되면 항체의 유도조종을 위한 항법장치 성능에 큰 영향을 미치게 되므로 오차 분석과 보상은 필수적이다. 따라서 본 논문에서는 MEMS 자이로스코프에 발생하는 G-민감도 오차를 분석하고 정의하여 관성센서 오차모델에 적용한다. 새로 정의된 관성센서 오차모델을 분석하여, 오차 성분을 고가속도 시험환경이 아닌 FMS 시험만으로 정확히 추출하는 방법을 제안한다. 그리고 제안한 방법으로 얻은 오차를 보상하여 고가속도 시험을 수행하고 그 결과를 분석하여 성능과 신뢰성을 검증한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.179-184
• /
• 2005

Shear strength parameters obtained from filed survey are important factors in the analysis of slope stability. In this study, sensitivity analysis was performed to evaluate the effect of input parameters on the analysis of slope stability. The input parameters selected for sensitivity analysis were slope angle, cohesion, and friction angle. Monte-Carlo Simulation method was used for calculating input parameters and the factor of safety was computed by means of limit equilibrium method. A rock slope, which has failed in the field, was used for the sensitivity analysis in the analysis of slope stability. The result of analysis shows that the factor of safety of the rock slope was a little low. From partial correlation coefficient(PPC) of input parameters determined from the sensitivity analysis, slope stability was dependant on cohesion and slope angle. The effect of friction angle was lower than that of cohesion and slope angle on slope stability.

• Journal of Welding and Joining
• /
• 제16권4호
• /
• pp.73-82
• /
• 1998

This paper is especially concerned with the weldment between support beam and square bar that plays important roles in control box of Expansion Joint as a brdige structure. Fatigue strength ({TEX}$$\sigma$_{ult}${/TEX}) of the weldment is dependent on notch factor ({TEX}$K_{f}${/TEX}) become important factors to predict fatigue life. The fatigue notch sensitivity (η) for metals can be divided into two types ; high and low notch sensitivity. In this work, the Expansion Joint weldment was found to have low notch sensitivity. The maximum strain distribution during static loading is similar to the FEM analysis. Fatigue test of real structure was performed up to {TEX}$10^{6}${/TEX} cycles to be compared with predicted endurance limit.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(4)
• /
• pp.101-106
• /
• 1996

For the application of the neutron flux mapping, an accurate calculation of the sensitivity is required because the sensitivity is proportional to the neutron flux density. Sensitivity is defined as the current per unit length per unit neutron flux and it mainly depends on the depression factor(f), the escape probability from the emitter($\varepsilon$1) and the charge build-up factor of the insulator layer(c). A Monte Carlo simulation was accomplished to calculate the sensitivity of rhodium emitter material and alumina(Al$_2$O$_3$) insulator with a cylindrical geometry, based on the (n,${\beta}$) interaction and on other interaction including the secondary electron generation for the more accurate estimation of the sensitivity. From the simulation results, factors fur the sensitivity were accurately calculated and compared with other theoretical and experimental values. In addition, the sensitivity linearly increases and saturates as the emitter radius increases. The accomplished method is useful in the analysis for the change of SPND sensitivity as a function of burn-up and in the optimum design of SPND.

• 한국농공학회논문집
• /
• 제57권1호
• /
• pp.99-109
• /
• 2015

In the construction industry, the interest for recycling aggregates is rising as more people demand for alternatives due to lack of supply of natural aggregates and environmental problems. However, in order for recycled aggregates to be used in infrastructures, stability and other factors need to be verified. Therefore, the objective of this study is to analyze the sensitivity of soil properties to secure slope safety according to various heights of embankment when bottom ash and dredged soil mixture is applied in the embankment. In most cases, all heights were safe for the slide for the embankment whether the water level is full or sudden draw down. The result of the sensitivity analysis revealed that the unit weight of embankments is highest among all factors to be considered. However, the sensitivity of the unit weight became smaller and the sensitivity of the friction angle of embankments increased with the height of embankments. The sensitivity of factors of core materials is very small because the core has weaker physical properties than those of the embankment. The effect of the height for each factor is different for each slope and water levels. The sensitivity of the unit weight of embankments is most affected when the height is 60m in the upstream slope. To conclude, bottom ash and dredged soil mixture can be applied in the embankment and different factors must be considered in different scale because the sensitivity depends highly on the height of embankments.

• 복식문화연구
• /
• 제15권6호
• /
• pp.1078-1083
• /
• 2007

The purpose of this study is to identify the relationships among price sensitivity, brand sensitivity, and fashion innovativeness. The data used in this study were gathered through surveying university students residing in Seoul metropolitan area using convenience sampling method. One hundred thirty eight questionnaires were used in statistical analysis, confirmatory factor analysis and path analysis using structural equation modeling. The results showed that the higher the price sensitivity, the lower the fashion innovativeness and the brand sensitivity.

• 대한의용생체공학회:의공학회지
• /
• 제32권3호
• /
• pp.245-250
• /
• 2011

Parallel imaging technique can provide several advantages for a multitude of MRI applications. Especially, in SENSE technique, sensitivity maps were always required in order to determine the reconstruction matrix, therefore, a number of difference approaches using sensitivity information from coils have been demonstrated to improve of image quality. Moreover, many filtering methods were proposed such as adaptive matched filter and nonlinear diffusion technique to optimize the suppression of background noise and to improve of image quality. In this study, we performed SENSE reconstruction using computer simulations to confirm the most suitable method for the feasibility of filtering effect and according to changing order of polynomial fit that were applied on variation of spatial resolution of sensitivity map. The image was obtained at 0.32T(Magfinder II, Genpia, Korea) MRI system using spin-echo pulse sequence(TR/TE = 500/20 ms, FOV = 300 mm, matrix = $128{\times}128$, thickness = 8 mm). For the simulation, obtained image was multiplied with four linear-array coil sensitivities which were formed of 2D-gaussian distribution and the image was complex white gaussian noise was added. Image processing was separated to apply two methods which were polynomial fitting and filtering according to spatial resolution of sensitivity map and each coil image was subsampled corresponding to reduction factor(r-factor) of 2 and 4. The results were compared to mean value of geomety factor(g-factor) and artifact power(AP) according to r-factor 2 and 4. Our results were represented while changing of spatial resolution of sensitivity map and r-factor, polynomial fit methods were represented the better results compared with general filtering methods. Although our result had limitation of computer simulation study instead of applying to experiment and coil geometric array such as linear, our method may be useful for determination of optimal sensitivity map in a linear coil array.