• 대한조선학회논문집
• /
• 제35권3호
• /
• pp.54-61
• /
• 1998

본 논문에서는 보유추 이론을 적용하여 초기 설계된 선체거더에 대한 상하 고유진동해석을 수행함과 동시에 설계변수 변경에 따른 고유진동수 및 고유모드의 변화율을 계산하는 감도해석방법을 활용하여 설계변경 또는 적화상태 변화시의 선체 고유진동 특성을 신속하게 예측할 수 있는 방법을 제시하였다. 이때, 이산화 해석방법은 전달행렬법을 적용하였으며, 설계변수로는 각 이산화 요소의 선체 중량, 2차원 부가수질량 및 동 3차원 수정계수, 유효굽힘강성 등으로 설정하였다. 감도해석 결과를 이용하여 중형 광석/살물운반선의 적화상태 변경시의 고유진동수를 추정한 결과는 통상적 재해석 결과와 비교하여 오차 2%이내의 매우 양호한 부합성을 나타내었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.99-104
• /
• 2000

Calibration equation for Variable Temperature Anemometer(VTA) has been tested for measured velocity-output data and the calibration process has been compared with that of Constant Temperature Anemometer(CTA). VTA has greater sensitivity than that of any other conventional anemometers, but to be more popular technique in flow field measurement, simple, accurate and well established calibration process should be suggested. To meet this purpose, similar calibration method used for CTA has been adopted for VTA and finally calibration equation for VTA including the effect of temperature drift has been proposed.

• 한국항공우주학회지
• /
• 제30권8호
• /
• pp.10-20
• /
• 2002

본 논문에서는 최적화 방법을 이용하여 동적 실속을 제어하는 방법을 제시하고자 한다. 비정상 공력 민감도 해석코드는 2 방정식 난류 모델을 사용한 비정상 압축성 Navier-Stokes 해석코드로부터 직접 미분법을 사용하여 개발되었다. 목적함수는 해석이 수행되는 전시간에 대한 것보다는 매 순간의 값을 사용하였다. 매 순간의 목적함수에 대한 구배값은 민감도 해석코드를 사용하여 얻었고, 최적화는 매 시간마다 간단한 건형 직선 조사방법(linear line search)을 이용하였다. 제어 변수는 익형의 노즈 반경, 최대 두께와 흡입을 사용하였다. 계산결과는 동적 실속을 제어하는데, 본 논문에서 제시한 최적화 방법이 효과적이라는 것을 보여주고 있다.

• Ocean and Polar Research
• /
• 제26권1호
• /
• pp.33-42
• /
• 2004

Effect of freshwater discharge on the long-term salt balance in the Northern and Central Indian River Lagoon (IRL) is successfully simulated by a new analytical solution to a water balance-based one-dimensional salt conservation equation. Sensitivity tests show that the salinity levels drop abruptly even during the dry season (November to May) due to the high surface runoff discharge caused by tropical storms, depressions, and passage of cold fronts. Increasing surface runoff and direct precipitation has risen by ten times, lowering the salinity level down to 12psu in the Northern Central zone, and to 17 psu in the Northern zone. However, the salinity level in the Southern Central zone has decreased to 25 psu. High sensitivity of the Northern Central zone to freshwater discharge can be partially explained by a rapid urbanization in this zone. During the dry season, less sensitivity of the Southern Central zone to the increased surface runoff is attributed to the proximity of the zone to the Sebastian Inlet and a strong diffusion condition possibly resulting from the seawater intrusion to the surficial aquifer at the Vero Beach. During the wet season, however, the whole study area is highly sensitive to freshwater discharge due to the weak diffusion conditions. High sensitivity of the IRL to the given diffusion conditions guarantees that the fresh-water release occurs during strong wind conditions, achieving both flood control in the drainage basin and a proper salinity regime in the IRL.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.8-16
• /
• 2006

This paper discusses design sensitivity analysis and its application to a structural dynamics modification. Eigenvalue derivatives are determined with respect to the element parameters, which include intrinsic property parameters such as Young's modulus, density of the material, diameter of a beam element, thickness of a plate element, and shape parameters. Derivatives of stiffness and mass matrices are directly calculated by derivatives of element matrices. The first and the second order derivatives of the eigenvalues are then mathematically derived from a dynamic equation of motion of FEM model. The calculation of the second order eigenvalue derivative requires the sensitivity of its corresponding eigenvector, which are developed by Nelson's direct approach. The modified eigenvalue of the structure is then evaluated by the Taylor series expansion with the first and the second derivatives of eigenvalue. Numerical examples for simple beam and plate are presented. First, eigenvalues of the structural system are numerically calculated. Second, the sensitivities of eigenvalues are then evaluated with respect to the element intrinsic parameters. The most effective parameter is determined by comparing sensitivities. Finally, we predict the modified eigenvalue by Taylor series expansion with the derivatives of eigenvalue for single parameter or multi parameters. The examples illustrate the effectiveness of the eigenvalue sensitivity analysis for the optimization of the structures.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1478-1485
• /
• 1993

본 연구에서는 압축 성형다이 가열선의 최적위치를 결정하는 문제를 다이의 형상 최적설계 문제로 정식화하고자 한다. 최적화 문제의 목적은 다이 내면의 온도를 지정된 온도로 균일하게 유지하는 것이다. 또한 Lee, Choi와 Kwak의 형상 설계 민감 도 해석을 위한 직접 미분 방법을 응용하여 가열선 위치변화에 관한 민감도 계산을 위한 경계 적분 방정식을 유도하고, 경계요소법으로 온도와 온도의 민감도를 해석하고 자 한다. 수치적 응용의 예로서, 넓은 평판의 성형을 위한 압축 성형다이의 가열선의 최적위치를 결정하는 문제를 다루고, 최적위치에서 가열선의 개수가 온도의 균일성에 미치는 영향을 검토한다.

• 물과 미래
• /
• 제21권4호
• /
• pp.407-414
• /
• 1988

본 논문의 목적은 하천 수질모형 시스템이 안정성 및 해감도이론에 의해 이론적으로 어떻게 분석되며, 그 결과 모형화를 위한 수치분석의 신뢰성과 수질 매개변수의 변화에 따른 모형의 민감성을 입증하는 것이다. 무한 Fourier 급수를 이용하여 전개한 안정성이론은 유한차분법을 사용한 모형의 수치해법을 분석하는데 있고, 1부 선형상태벡터식으로 표현되는 민감도이론은 BOD 부하, 유량, 온도와 같은 수질배개변수의 변동효과를 이론적으로 분석하는데 사용되었고, 그 연구 결과는 하천 수질모형시스템의 신뢰성을 파악할 수 있음이 입증되었다.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.29-34
• /
• 2020

In this study, a sensitivity formulation was applied to analyze the dynamic response due to the effect of the excitation force for the undamped vibration of the cantilever beam. The theoretically fundamental formulations were derived considering an eigenvalue problem and its modal analysis to govern the second order algebraic differential equation in terms of the change in the modal coordinate with respect to the design parameters. A representative physical quantity pertaining to the dynamic response, that is, the rate of change in the dynamic displacement, was observed by changing the design variables, such as the cross-sectional area of the beam. The numerical results were obtained at various locations, considering the application of the external forces and observation of the dynamic displacement. When the detection position was closer to the free end of the cantilever beam, the sensitivity of the dynamic displacement was higher, as predicted through the oscillating motion of the beam. The presented findings can provide guidance to compute the dynamic sensitivity for a flexibly connected structure under dynamic excitations.

• 한국의상디자인학회지
• /
• 제23권2호
• /
• pp.67-78
• /
• 2021

This study aims to analyze how students' design work functions affect consumer attitudes and purchase intentions toward clothes designed by students, while exploring the moderating effect of price sensitivity in such a relationship. Data was acquired from 351 responses of an online questionnaire (www.sojump.com). A two-step approach was employed to analyze our hypotheses using structural equation modeling (SEM) in SPSS 22.0 and AMOS 22.0 statistical packages. First, significant empirical evidence was secured regarding the effects of design functions (assurance, fashion, camouflage, individuality, and comfort) on consumer attitudes toward clothes, which can lead to purchasing intention. Fashion, individuality, and comfort functions can enhance consumer attitude significantly, but assurance and camouflage have no significant influence. Among the functions, comfort has the greatest effect on consumer attitudes, indicating that when students market works as commodities, comfort should be highlighted in their designs. In this way, such products can draw the interest of many consumers. Second, empirical evidence showed that price sensitivity negatively moderates the association between attitude and purchase intention. Thus, design courses should be careful when setting student works' prices given consumer sensitivity. The optimization of the student works' cost structure can help minimize price sensitivity. Overall, the findings and their implications can serve as a basis for the commercial application of design curriculum works and provide feasible support for developing student design curriculum in the future.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.391-396
• /
• 2008

A level set based topological shape optimization using extended B-spline basis functions is developed for steady state heat conduction problems. The only inside of complicated domain is identified by the level set functions and taken into account in computation. The solution of Hamilton-Jacobi equation leads to an optimal shape according to the normal velocity field determined from the sensitivity analysis, minimizing a thermal compliance while satisfying a volume constraint. To obtain exact shape sensitivity, the precise normal and curvature of geometry need to be determined using the level set and B-spline basis functions. The nucleation of holes is possible whenever and wherever necessary during the optimization using a topological derivative concept.