• Title/Summary/Keyword: Sensitive analysis

Search Result 3,674, Processing Time 0.027 seconds

Moving Window Principal Component Analysis for Detecting Positional Fluctuation of Spectral Changes

  • Ryu, Soo-Ryeon;Noda, Isao;Jung, Young-Mee
    • Bulletin of the Korean Chemical Society
    • /
    • v.32 no.7
    • /
    • pp.2332-2338
    • /
    • 2011
  • In this study, we proposed a new promising idea of utilizing moving window principal component analysis (MWPCA) as a sensitive diagnostic tool to detect the presence of peak position shift. In this approach, the moving window is constructed from a small data segment along the wavenumber axis. For each window bound by a narrow wavenumber region, separate PCA analysis was applied. Simulated spectra with complex spectral feature variations were analyzed to explore the possibility of MWPCA technique. This MWPCA-based detection of the peak shift, potentially coupled with 2D correlation analysis to provide additional verification, may offer an attractive solution.

Vibration Analysis of Network Communication Equipment (네트워크 통신장비의 진동 해석)

  • Lee Jae-Hwan;Kim Jin-Sup;Kim Young-Jung
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2006.04a
    • /
    • pp.467-472
    • /
    • 2006
  • The purpose of this paper is to check the structural safety of the network equipments by performing the static and dynamic finite element analysis. The stress and displacement of structures under static loading condition are evaluated to check whether satisfying the design requirement conditions. Since the computed natural frequencies are similar to the results of experiment. the model could be used for the response spectrum analysis where experimental acceleration value at each frequency are used as seismic input excitation. It is shown that the analysis results are a little bit larger than that of the experimental values. Also sensitivity analysis and optimization for the natural frequency are performed and it is found that the first natural frequency is very sensitive to the stiffness of the equipment.

  • PDF

ACTIVATION ANALYSIS OF ENVIRONMENTAL SAMPLES USING THE MT-25 MICROTRON OF THE FLNR

  • Maslov, O.D.;Belov, A.G.;Starodub, G.Ya.;Dmitriev, S.N.
    • Analytical Science and Technology
    • /
    • v.8 no.4
    • /
    • pp.815-820
    • /
    • 1995
  • Instrumental neutron and gamma activation analysis of coal and combustion products, determination of platinum content in natural samples by radiochemical gamma activation analysis and high-sensitive track method of thorium determination has been studied with the use of the MT-25 microtron.The optimal conditions for complete elemental analysis of coal and combustion products, isolation and determination of platinum and thorium are recommended.

  • PDF

An image Analysis Technique Using Integral Projections in Object-Oriented Analysis-Synthesis Coding (물체지향 분석 및 합성 부호화에서 가산 투영을 이용한 영상분석기법)

  • 김준석;박래홍
    • Journal of the Korean Institute of Telematics and Electronics B
    • /
    • v.31B no.8
    • /
    • pp.87-98
    • /
    • 1994
  • Object-oriented analysis-synthesis coding subdivides each image of a sequence into moving objects and compensates the motion of each object. Thus it can reconstruct real motion better than conventional motion-compensated coding techniques at very-low-bit-rates. It uses a mapping parameter technique for estimating motion information of each object. Since a mapping parameter technique uses gradient operators it is sensitive to redundant details and noise. To accurately determine mapping parameters, we propose a new analysis method using integral projections for estimation of gradient values. Also to reconstruct correctly the local motion the proposed algorithm divides an image into segmented objects each of which having uniform motion information while the conventional one assumes a large object having the same motion information. Computer simulation results with several test sequences show that the proposed image analysis method in object-oriented analysis-synthesis coding shows better performance than the conventional one.

  • PDF

Sensitivity Analysis and Confidence Evaluation for Planar Errors of a Vertical Turning Center (수직형 선반의 평면 오차 민감도 분석 및 신뢰도 평가)

  • 여규환;양승환
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.15 no.11
    • /
    • pp.67-75
    • /
    • 1998
  • Geometric and thermal errors are key contributors to the errors of a computer numerically controlled turning center. A planar error synthesis model is obtained by synthesizing 11 geometric and thermal error components of a turning center with homogeneous coordinate transformation method. This paper shows the sensitivity analysis on the temperature change, the confidence evaluation on the uncertainty Of measurement systems, and the error contribution analysis from the planar error synthesis model. Planar error in the z direction was very sensitive to the temperature change. and planar errors in the x and z directions were not affected by the uncertainty of measurement systems. The error contribution analysis ,which is applicable to designing a new turning center, was helpful to find the large error components which affect planar errors of the turning center.

  • PDF

Anslysis of tool grip tasks using a glove-based hand posture measurement system

  • Yun, Myung Hwan;Freivalds, Andris;Lee, Myun W.
    • Journal of the Ergonomics Society of Korea
    • /
    • v.14 no.1
    • /
    • pp.69-81
    • /
    • 1995
  • Few studies on the biomechanical analysis of hand postures and tool handling tasks exist because of the lack of appropriate measurement techniques for hand force. A measurement system for the finger forces and joint angles for the analysis of manual tool handling tasks was developed in this study. The measurement system consists of a force sensing glove made from twelve Force Sensitive Resistors and an angle-measuring glove (Cyberglove$^{TM}$, Virtual technologies) with eighteem joint angle sensors. A biomechanical model of the hand using the data from the measurement system was also developed. Systems of computerized procedures were implemented inte- grating the hand posture measurement system, biomechanical analysis system, and the task analysis system for manual tool handling tasks. The measurement system was useful in providing the hand force data needed for an existing task analysis system used in CTD risk evaluation. It is expected that the hand posture measurement developed in this study will provide an efficient and cost-effective solution to task analysis of manual tool handling tasks.s.

  • PDF

The Whole Region Pressure Measurement of Cavity Downstream using PSP Technique (PSP를 이용 다양한 공동 후류의 전역적 압력분포 측정)

  • Seo, Hyung-Seok;Oh, Ju-Young;Jeon, Young-Jin;Lee, Jae-Woo;Byun, Yung-Hwan
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.11 no.6
    • /
    • pp.50-57
    • /
    • 2007
  • Pressure Sensitive Paint(PSP) means a reacting paint in pressure. PSP can measure continuous pressure field by analyzing the oxygen quantity using optical method. The surface pressure of down stream after the sonic jet that injected transversely into the supersonic freestream was measured by PSP technique. Moreover the effect of various rectangular shaped cavities in front of the jet was measured by PSP technique. A comparison of the PSP results with conventional pressure tap and CFD indicates good agreement. Until now, the results of numerical analysis were compared with the discrete points such as the results of pressure tap. In this study, the whole region pressure was measured using PSP technique and its results were similar to CFD. Therefore, the flow phenonenon of cavity downstream was clearly grasped.

Responses of Inferior Olive Neurons to Stimulation of Semicircular Canals. II. Vertical Semicircular Canalss

  • Park, Sah-Hoon;Park, Jong-Seong;Park, Jin-Soon
    • The Korean Journal of Physiology and Pharmacology
    • /
    • v.7 no.4
    • /
    • pp.193-198
    • /
    • 2003
  • In the present study, the vestibularly evoked activity of inferior olive (IO) neurons was examined to investigate the vertical vestibular information transmitted through the vestibulo-olivo-cerebellar climbing fiber pathway. The extracellular recording was made in 74 neurons of the IO of cats, while animals were sinusoidally rotated. Most of vestibularly activated IO neurons responded to the vertical rotation (roll) test and were found in or near the ${\beta}$ subnuclei $(IO{\beta})$. The vestibular IO neurons were activated, when the animal was rotated to the side contralateral to the recording site. In contrast to the observation that the gain of responses of yaw sensitive cells (YSC) was not changed by the rotation frequency, that of the roll-sensitive cells (RSC) decreased as the rotation frequency was increased. Regardless of RSC or HSC, IO neurons showed the tendency of phase-lag in their responses. The alternating excitatory and inhibitory phases of responses of RSC were dependent on the direction of head orientation, the characteristics of which are the null response plane (NRP) and the optimal response plane (ORP). The analysis based on the NRP of RSC showed that vestibular inputs from the ipsilateral anterior semicircular canal induced the NRP of the RSC response at about 45 degree counterclockwise to the longitudinal axis of the animal, and that those inputs were distributed to RSC in the rostral part of $IO{\beta}$. On the other hand, those from the posterior semicircular canal were related with the NRP at about 45 degree clockwise and with the caudal part of the $IO{\beta}$. These results suggest that IO neurons receive and encode the vestibular information, the priority of which seems to be the vertical component of the body movement rather than the horizontal ones.

The Effect of Reflection and Mentoring Based on Gender - Sensitive Teaching Strategies (성인지적 교수전략을 바탕으로 한 수업 성찰과 멘토링 효과)

  • Hong, Kyung-Sun;Kim, Dong-Ik;Gu, Su-Yeon;Ahn, Jin-Kyung
    • Journal of Engineering Education Research
    • /
    • v.14 no.2
    • /
    • pp.40-50
    • /
    • 2011
  • This study is to investigate an effective instruction for female students in an engineering classroom through gender -sensitive teaching strategies by analysing recorded classroom instruction, reflective journals of professor, and mentoring instructions of A professor teaching "non-steel materials and design" in an engineering classroom. This study which used a qualitative approach for data collection and analysis showed changes of A professor in his way of teaching. The changes are: making rough lesson plan ${\rightarrow}$ making detailed lesson plan being satisfied with his teaching skills ${\rightarrow}$ trying to improve his teaching skills, using negative feedback ${\rightarrow}$ using positive feedback, pointing weaknesses as pre-engineers ${\rightarrow}$ providing detailed information needed to be engineers. This paper deals with the theory comparison between a conventional engineering education and new engineering education, in which conventional models may fail to give satisfactory results. Finally, we provide real application examples to evaluate the feasibility and generality of the proposed method in this paper.

The Gender Sensitive Analysis of Occupational Injuries and Illnesses of Employees (임금근로자의 산업재해에 대한 성인지적 분석)

  • Rhee, K.Y.;Kim, Young Sun;Kim, K.S.;Park, J.S.;Seo, D.U.;Kim, H.M.
    • Journal of the Korean Society of Safety
    • /
    • v.29 no.6
    • /
    • pp.158-165
    • /
    • 2014
  • The statistics of occupational injuries and illnesses is one of the most important indicators of worker's safety and health in the field of occupational safety and health. The conventional statistics was produced without consideration of gender difference. This study was planned to investigate the difference of occupational injuries and illnesses by gender because that recently female workers was increased through the change of industrial structure such as from manufacturing dominated to service dominated structure. Statistics of occupational injuries and illnesses collected by workmen's compensation insurance system that have no information about gender composition of population. Economically active population survey was used to calculated the rate of occupational injuries and illnesses by gender. The distribution of estimated rate of occupational injuries and illnesses by industry, occupation and the type of accident were different between male and female employees, but those by the size of enterprise, age of the injured, the duration of the first recuperation, and job tenure were similar between male and female employees. This study has shown that gender sensitive approach may be applied to policy of occupational safety and health because that gender neutral perspective may not discover the fact of gender specific problems.