• 한국생활과학회지
• /
• 제24권5호
• /
• pp.663-676
• /
• 2015

The purpose of this study was to examine whether any differences can be found in body comparison, body satisfaction, and appearance management behaviors according to the MBTI's typology among male and female adolescents in Gwangju and South Jeolla province, South Korea. It was conducted by a self-report survey of 534 male and female high school students in Gwangju and South Jeolla province. The collected survey data were analyzed by Means, Cronbach's ${\alpha}$, Factor analysis, and t-test using the SPSS/PC WIN 19.0 statistical program. The results were as follows: Introversion Type(I) teens tend to think a thinner body is closer to the ideal when compared to Extroversion type(E) students. They spend less time comparing their bodies with their peers. However, they usually have lower levels of body satisfaction and are more likely to be concerned about acne. Intuition Type(N) students tend to have a body figure that is a little plumper than Sensing Type(S) teens. They are inclined to try and lose weight and are concerned about acne. Sensing Type(S) students are more likely to compare their bodies with their peers than Intuition Type(N) teens. However, they are generally less satisfied with their bodies. Feeling Type(F) teens are more concerned with harmony and personal hygiene the Thinking Type(T) students. Judging Type (J) students generally want to be thinner than their current body type when compared with Perceiving Type(P) teens. When Judging Type(J) teens decide they need to be on a diet, they do their best to lose weight even if it means exercising and forgoing their favorite foods. These results indicate that it would be more effective to offer guidance to teens while taking into consideration their differences in terms of appearance management behaviors based on the MBTI Topology of Adolescents.

• 전기의세계
• /
• 제24권6호
• /
• pp.85-91
• /
• 1975

A new design method for the SCR-Chopper type speed controller of the battery-powered vehicles was developed. The conventional speed-controllers were either inductance type or contact type using resistance. In the new method, a photocoupler was used in sensing the control currents and a noncontacting type photo-conductive device (CDS) was used in mading acceleration. Experiments using these new devices showed encouraging results.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제5권12호
• /
• pp.635-640
• /
• 2016

생산 시스템의 신뢰도와 공정에서의 품질관리는 수익과 직결되는 중요한 요소이다. 이런 이유로 M2M 디바이스 레벨에서 데이터를 획득하는 방법 그리고 그것을 응용하여 신뢰도 및 품질 등과 연결하는 연구에서 최근 많은 성과를 보이고 있다. 본 논문은 이러한 연구 결과의 연장으로 획득한 데이터의 처리방법과 결과에 관한 것이다. 일반적으로, 센서 데이터와 같은 미세한 차이를 가지는 신호를 이용하여 제품의 품질을 식별하는 것은 기존의 통계적인 방법에서는 어렵다. 그러나 최근 기계 공정에서 정보를 실시간적이고 즉시적으로 처리를 해야 하는 요구가 증대되고 있다. 특히 사출성형 공정의 경우 프로세스가 짧은 Cycle 갖고 있어 프로세스의 진행과 동시에 제품의 양-불량을 판별할 수 있는 방법이 필요하다. 본 논문은 Kalman Filter를 적용하여 사출공정의 센서 데이터를 실시간적으로 처리하여 제품의 상태를 판단할 수 있는 방안을 제시한다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 창립 20주년기념 특별학술발표회
• /
• pp.74-75
• /
• 2009

• 조명전기설비학회논문지
• /
• 제15권6호
• /
• pp.20-26
• /
• 2001

본 논문에서는 터널의 내공변위를 측정하고 측정된 데이터를 효율적으로 관리하는 계측 시스템을 설계하였다. 계측 시스템은 마이크로콘트롤러로와 포텐시오메터형 변위센서로 구성되는 Intelligent Sensing Head와 계측 시스템을 운용하고 측정된 데이터를 관리하는 호스트 컴퓨터로 구성된다. Intelligent Sensing Mead와 호스트 컴퓨터는 다중노드 통신방식에 의하여 연결되며 다중노드 네트워크의 안정된 동작을 위하여 Daisy-Chain 형태로 네트워크를 구성하였고 Fail-Safe 회로를 설계하였으며 Modbus 프로토콜을 사용하여 시스템의 범용성을 높였다. 호스트 컴퓨터는 종합관리 소프트웨어에 의하여 다양한 측정조건을 선택할 수 있으며 데이터베이스를 이용하여 측정된 데이터를 관리한다. 설계된 시스템은 터널에 설치되어 효용성을 확인하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.160-165
• /
• 2004

MPA (Multi-Point Averaging) flow element is a new type of differential pressure (DP) flow-sensing device that was developed by Seojin Instech to improve the operating characteristics of the conventional Averaging Pilot Tube (APT) flow elements. Operating characteristics of a flowmeter in general can be defined in terms of measurement accuracy and range. Improvement of accuracy and expanding the range of flow measurement were the two main objectives of the development. To achieve these dual objectives several upstream and downstream pressure-sensing holes were placed in MPA flow element. During the course of the development it was found that certain arrangements of the pressure-sensing holes improved measurement accuracy but did not expand operating flow range of Averaging Pilot Tubes. Development tests were performed with water between Reynolds number of 50,000 and 1,000,000 in the four-inch test line at the Alden Research Laboratory, U.S.A. Purpose of this paper is to present the relationship between the various locations of the pressure-sensing holes and the performance characteristics of MPA flow element. Furthermore, the operating characteristics of the best performing MPA are compared with those of typical orifice and APT.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.161-166
• /
• 2007

Various thermostatic valves have been used widely in Korea for conservation of heating energy and enhancement of thermal comfort in residential buildings. But heating control performances of thermostatic valves extensively vary with the design and operational conditions of the heating system, climate condition and others. An experimental method was carried out in this study to analyze heating control characteristics by temperature sensing methods of thermostatic valves for various parameters, such as supply temperatures and flow rate of hot water, the position of room thermostats and outdoor air temperatures. As a result, the heat flow rate per day of S-Valve($34^{\circ}C$-Type) of water temperature sensing method was liked that of C-Valve of indoor air temperature sensing method with stage 3.3 of room thermostat in case supply temperature of hot water was $45^{\circ}C$, flow rate was 1.3 L/min and outdoor air temperature was $7.8^{\circ}C$.

• Structural Engineering and Mechanics
• /
• 제72권2호
• /
• pp.217-227
• /
• 2019

The methodology known as "shape sensing" allows the reconstruction of the displacement field of a structure starting from strain measurements, with considerable implications for structural monitoring, as well as for the control and implementation of smart structures. An approach to shape sensing is based on the inverse Finite Element Method (iFEM) that uses a variational principle enforcing a least-squares compatibility between measured and analytical strain measures. The structural response is reconstructed without the knowledge of the mechanical properties and load conditions but based only on the relationship between displacements and strains. In order to efficiently apply iFEM to the most common structural typologies of civil engineering, its formulation according to the kinematical assumptions of the Bernoulli-Euler theory is presented. Two beam inverse finite elements are formulated for different loading conditions. Depending on the type of element, the relationship between the minimum number of required measurement stations and the interpolation order is defined. Several examples representing common applications of civil engineering and involving beams and frames are presented. To simulate the experimental strain data at the station points and to verify the accuracy of the displacements obtained with the iFEM shape sensing procedure, a direct FEM analysis of the considered structures is performed using the LUSAS software.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권9호
• /
• pp.427-432
• /
• 2005

Ion migration characteristics of a rotary spark airgap of high voltage Pulse generator had been investigated. It was considered that the ion migration speed and the ions of the gases(atmosphere gases, $O_2,\;N_2,,\;and\;H_{2}O,\;etc$.) and the charged very fine particles(about $10\~100nm$ size) migrated through the upper stator ball and bottom stator ball of the rotary spark airgap would determined the rise and fall times of the output high voltage pulse. In this paper, a basic study on the ion migration characteristics of the rotary spark airgap between the spark stator ball and the ion-sensing electrode of the proposed high voltage pulse generator have been investigated experimentally. As a result, the three kinds of ion speeds were detected by the ion-sensing electrode installed at the position of the bottom stator ball of the ball type sparkgap high voltage pulse generator. The migration velocities, diameters, masses, charges, numbers of the ions and particles were obtained by experiments and calculations, which, however, would determine the rise and fall times of the output high voltage pulse.

• 동아시아식생활학회지
• /
• 제13권5호
• /
• pp.371-378
• /
• 2003

The purpose of this study was to investigate the dietary behavior and food preference based on the personality types of the high school students in Gyeongju. According to the survey on the personality types of the students, the type of SP(Sensing-perceiving) occupied the highest ratio, 46% and NF(Intuition-Feeling) 8.6% and NT(Intuition-Thinking) 8.2% and SJ(Sensing-Judging) 7.1%. The difference between the ratio of SP(Sensing-perceiving) and NF was the highest. There was a difference according to the personality types in the effect of knowledge learned in school on the choice of food; the types of NT and NF did not influence on it. The degree of regularity in the amount of every meal showed a significant difference according to the personality types (p<.05); students with NT and SJ types had the regular meals. The factors which could influence on the dietary behavior were parents(60.7%), friends(16.9%) and mass media and books(13.8%), etc. School education had a little influence on the dietary behavior, only 8.0%. Therefore, more practical education was needed. In the food preference, the type of NF preferred the foods with sweet taste while the others with hot taste.