• International Journal of Aeronautical and Space Sciences
• /
• 제17권4호
• /
• pp.565-578
• /
• 2016

A probabilistic based systems approach is addressed in this study for the reliability prediction of solid rocket motors (SRM). To achieve this goal, quantitative Failure Modes, Effects and Criticality Analysis (FMECA) approach is employed to determine the reliability of components, which are integrated into the Fault Tree Analysis (FTA) to obtain the system reliability. The quantitative FMECA is implemented by burden and capability approach when they are available. Otherwise, the semi-quantitative FMECA is taken using the failure rate handbook. Among the many failure modes in the SRM, four most important problems are chosen to illustrate the burden and capability approach, which are the rupture, fracture of the case, and leak due to the jointed bolt and O-ring seal failure. Four algorithms are employed to determine the failure probability of these problems, and compared with those by the Monte Carlo Simulation as well as the commercial code NESSUS for verification. Overall, the study offers a comprehensive treatment of the reliability practice for the SRM development, and may be useful across the wide range of propulsion systems in the aerospace community.

• Steel and Composite Structures
• /
• 제28권3호
• /
• pp.331-347
• /
• 2018

In this paper history of stresses, strains, radial and circumferential displacements of a functionally graded thick-walled hollow cylinder due to creep phenomenon is investigated. The cylinder is subjected to an arbitrary non-axisymmetric two dimensional thermo-mechanical loading and uniform magnetic field along axial direction. Using equilibrium, strain-displacements and stress-strain relations, the governing differential equations of the problem containing creep strains are derived in terms of radial and circumferential displacements. Since the displacements are varying with time due to creep phenomenon, an analytical solution is not available for these equations. Thus, a semi-analytical procedure based on separation of variables and Fourier series together with a numerical procedure is employed. The numerical results indicate that the non-axisymmetric loading and the material grading index have significant effect on stress redistributions. Moreover, by proper selection of material for any combination of non-axisymmetric loading, one can arrive suitable response for the cylinder to achieve optimal design. With some simplifications, the results are validated with the existing literature.

• Mass Spectrometry Letters
• /
• 제2권1호
• /
• pp.12-15
• /
• 2011

The Korean government has regulated emission of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in waste water of manufacturing facilities producing chlorinated compounds since 2009. As this regulation is expected to be reinforced in 2013 to 50 pg I-TEQ/L, a large sample volume is required for the analysis of trace amounts of PCDD/Fs in waste water. Liquid-liquid extraction (LLE) is used to extract PCDD/Fs from aqueous samples; however, its low efficiency makes it inadequate for analyzing large sample volumes. Herein, we present a disk-type solid-phase extraction (SPE) method for the analysis of dioxin at a part per quadrillion level in waste water. This SPE system contains airtight glass covers with a decompression pump, which enables continuous semi-automated extraction. Small (0.5 L) and large (7 L) samples were extracted using LLE and SPE methods, respectively. The method detection limits (MDLs) were 0.001.0.25 and 0.015.4.1 pg I-TEQ/L for the SPE and LLE methods, respectively. The concentrations of detected congeners with both methods were similar. However, the concentrations of several congeners that were not detected with the LLE method were quantified using the SPE method.

• 태양에너지
• /
• 제5권2호
• /
• pp.77-83
• /
• 1985

An analysis is performed to investigate the influence of the buoyancy force and the thickness variation of melting layer in the containment that is filled with phase-change Material surrounding a cylindrical heating tube during melting process. The phase-change material is assumed to be initially solid at its phase-change temperature and the remaining solid at any given time is still at the phase-change temperature and neglecting the effect of heat transfer occuring within the solid. At the start of melting process, the thickness of melting layer is assumed to be a stefan-problem and after the starting process, the change of temperature and velocity is calculated using a two dimensional finite difference method. The governing equations for velocity and temperature are solved by a finite difference method which used SIMPLE (Semi Implicit Method Pressure linked Equations) algorithm. Results are presented for a wide range of Granshof number and in accordance with the time increment and it is founded that two dimensional fluid flow occurred by natural convection decreases the velocity of melting process at the bottom of container. The larger the radius of heating tube, the higher heat transfer is occurred in the melting layer.

• 분석과학
• /
• 제33권1호
• /
• pp.11-22
• /
• 2020

When extracting semi-volatile components of herbal medicines using hot water vapor, some substances may react with water vapor or oxygen, and some volatile substances may be lost, when using an organic solvent extraction method has the disadvantage that it may contain a non-volatile material and residual organic solvent. In addition, it is inefficient to separate semi-volatile substances from herbal medicines into each single component and conduct biological activity research for each component to determine the effective ingredient, and some components may be lost in the separation process. In this study, semi-volatile substances evaporated under two pressure-reduced conditions in Chinese herbal medicines such as Cnidii Rhizoma, Aucklandiae Radix and Amomum Fructus were separated by cooling with liquid nitrogen. Those were analyzed by gas chromatography-mass spectrometry (GC-MS) to identify the components, and this method may be used to study biological activities at the cellular level. The substances separated under reduced pressure, essential oil obtained by simultaneous distillation extraction (SDE) method and substances by using solid phase micro-extraction (SPME) from Cnidii Rhizoma, Aucklandiae Radix and Amomum Fructus were analyzed by GC-MS. In the case of Cnidii Rhizoma and Aucklandiae Radix, there were some differences among the essential oil components obtained by SDE and those identified by low temperature capture (CT) and SPME method, these were believed to be produced by some volatiles reacting with water or oxygen at the boiling point temperature of water.

• 한국멀티미디어학회논문지
• /
• 제12권9호
• /
• pp.1217-1232
• /
• 2009

본 논문에서는 실외에서 촬영된 비교정 영상으로부터 3차원 건물 구조를 복원하는 반자동화 방법론을 제안한다. 사용자는 관심있는 건물을 임의의 위치에서 촬영한다. 본 논문에서 제안하는 시스템은 먼저, 입력영상에 대하여 SIFT 알고리즘을 이용하여 특징점과 대응점을 추출한다. 두 번째로, 각 영상에 존재하는 선과 소실점을 추정하고, 추정된 소실점으로 추출한 선들을 그룹화 한다. 다음으로, 각 영상 간의 관계를 대응점의 개수로 정의한 인접 그래프를 이용하여 입력 영상에 대한 순서를 정의하여, 각 영상을 촬영한 카메라의 위치 정보를 보정한다. 최종적으로 추정한 카메라의 정보와 각 영상에서 그룹화된 선을 이용하여 건물의 대략적인 3차원 구조를 복원한다. 하프 에지(half-edge) 자료 구조와 오일러 연산자(Euler operator)를 이용한 상세 모델링을 수행함으로써 완성된 건물 구조를 복원할 수 있다. 본 논문에서는 자동으로 추출된 기하학적 정보를 이용하여 최소한의 사용자 입력으로 건물을 복원 할 수 있도록 하였다.

• 한국전산구조공학회논문집
• /
• 제26권4호
• /
• pp.213-221
• /
• 2013

이 논문에서는 반무한 고체영역의 표면에서 측정한 변위응답의 시간이력으로부터 유한요소망 연속기법을 이용해 탄성파 속도의 공간적 분포를 추정하는 역해석 문제를 소개한다. 반무한 영역에서의 역해석을 위해서는 해석 대상이 되는 유한영역의 경계에서 파동의 반사가 일어나지 않도록 하는 것이 중요하다. 이를 위해 유한영역의 경계면에 perfectly-matchedlayers(PMLs)라는 수치적 파동흡수층을 도입하였고, PML을 경계로 하는 유한영역에서 역해석 문제를 정의하였다. 이 문제를 탄성파동방정식을 구속조건으로 하는 최적화 문제로 표현하였으며, 라그랑주 승수법에 기초한 비구속 최적화 기법에 의해 탄성파속도의 최적 분포를 결정하였다. 해의 정확도와 수렴성을 높이기 위해 유한요소망 연속기법을 도입하여 점진적으로 밀도가 증가하는 유한요소망에 대해 연속적으로 역해석을 수행하였다. 1차원 예제들을 통해 유한요소망 연속기법을 이용한 역해석으로부터 탄성파속도의 분포를 정확히 추정할 수 있음을 확인하였으며, 측정 응답에 노이즈가 존재하는 경우에도 제안한 역해석 기법은 목표 탄성파속도 분포에 근사한 결과를 도출하였다.

• 한국주조공학회지
• /
• 제31권6호
• /
• pp.347-353
• /
• 2011

There is thixo-extrusion to form high strength aluminum alloy. But, it is a problem that grains become grain coarsening during reheating process because the alloy was exposed at high temperature. In order to solve grain growth during reheating process, calcium was added in Al-Zn-Mg alloys. Primary a grain sizes of semi-solid Al-Zn-Mg-(0, 0.4, 0.6 and 0.9, wt.%)Ca were measured with image analyzer after reheating. Measured primary a grain sizes were applied to LSW(Lifshitz-Slyozov and Wagner) equation to check the effect of Ca on grain coarsening. Coarsening rate constant K values of semi-solid Al-Zn-Mg-(0, 0.4, 0.6 and 0.9, wt.%)Ca alloys were $371\;mm^3s^{-1}$, $247\;mm^3s^{-1}$, $198\;mm^3s^{-1}$ and $166 mm^3s^{-1}$, respectively. As increasing calcium content, K value decreased which means grains are refined. Also, grains of calcium addition were more spherical than that of calcium free.

• 식물조직배양학회지
• /
• 제28권3호
• /
• pp.153-157
• /
• 2001

기내에서 성장한 배추의 자엽, 하배축과 계대배양한 지 2~3주 되는 어린잎이 원형질체 분리재료로 사용되었다. 배추의 원형질체 분리에 가장 적합한 효소의 조합은 0.4M mannitol 을 삼투조절제로 한 1% Cellulysin과 0.5% Macerozyme의 효소조합이 배추 원형질체 분리에 가장 적합한 것으로 나타났으며, 잎조직을 27$\pm$1$^{\circ}C$에서 30rpm의 속도로 12~16시간 동안 효소와 반응시켰을 때 7.6$\times$$10^{5}$ protoplast/g의 가장 많은 원형질체를 얻었다. 세포분열을 유기시키기 위하여 K8p 배지에 5 mg/L 2,4-D와 2 mg/L에 첨가하였을 때 배양 7~10일에 자엽과 하배축에서 분리한 원형질체에서 세포군들이 형성되었다. 분열한 세포가 8~10 세포크기 단계에 이르면 0.2% agarose 반고체 배지에 고정시켜 배양하였다. 얻어진 calli들을 100가지 다양한 재분화 배지에 옮겼으나 식물체의 재분화는= 이뤄지지 않았지만, 간혹 캘러스에서 뿌리가 분화되는 것은 관찰할 수 있었다.

• 대한본초학회지
• /
• 제36권1호
• /
• pp.87-95
• /
• 2021

Objective : Liquidambaris Storax, the processed resin of Liquidambar orientalis Mill., has been therapeutically used as orifice-opening medicinals in Korean Medicine. However, unauthenticated resinous drugs from various origins were sold as Liquidambaris Storax. This study aimed to establish the quality assessment of genuine Liquidambaris Storax and to provide quantitative differences of Liquidambaris Storax in herbal markets. Methods : Bibliographic research on ancient Liquidambaris Storax was performed using classic books of herbology. The quality assessment was approached by searching modern books of herbal medicines. The marker compounds in Liquidambaris Storax from various origins were quantitatively analyzed using high-performance liquid chromatography. Results : L. orientalis was botanically characterized by palmately 5-lobed shape of leaves. Genuine Liquidambaris Storax was recognized as resinous or semi-solid form (ancient―Song dynasty) to liquid form (Myeong/Cheong dynasty) and two processed forms were available in current markets. Genuine liquid Liquidambaris Storax should be lengthened as a thread when it was lifted by a stick and be sunken under the water. The crystals of cinnamic acid was seen under microscopic observation and the scent of benzaldehyde occurred after the treatment with potassium permanganate. Cinnamyl alcohol, cinnamic acid, and cinnamaldehyde were quantified in two liquid samples of Liquidambaris Storax, while cinnamaldehyde was not quantified in resinous (semi-solid) sample. Conclusion : This study presents the detailed methods of quality assessment for genuine Liquidambaris Storax as well as the status in the herbal markets. Further quantitative study with diverse samples is required to establish the quality standard of Liquidambaris Storax.