• 한국주거학회논문집
• /
• 제11권3호
• /
• pp.43-51
• /
• 2000

This study aims to find the characteristics of the folk houses in the upper area of Seomjin river in the view point of generating housing floor plans by their human and natural elements of environment. Because they are formed differently as them and have the characteristics as the houses in the upper area of Seomjin river. Seomjin river flows from mid-west area of the Korean peninsula to the southern sea. This is about 212.3km long and the fourth in the south of the Korean peninsula. It is surrounded high mountains in the upper area and makes open field in the mid and lower area of river. The study is surveyed and analyzed to the folk houses of the middle and lower class people in the area of Seomjin river. Because they have been formed by their natural and human elements of environment gradually. They are 35 houses - 13 in Jinan-kun, 4 in Imsil-kun, 10 in Namwon city, 10 in Sunchang-kun. They are analyzed by their floor plans and their spatial relations. The result of this study is that they are made by their natural and human elements of environment. There are some houses with semi-several wings and with storage that are appeared in the mountain village. It reflects that they are surrounded by high mountains. And there are some houses with wooden floor room that are appeared in the area of river little in the area of mountain. To prevent wind from the river the houses are layouted as a form . open ㄴ type, open ㄷ type, and their wall is made of stone and planted bamboo trees around their houses.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권7호
• /
• pp.974-980
• /
• 2014

In semi-arid areas of Southern Africa, dehydration can compromise the performance and welfare of local chickens, particularly during the growing period when confinement is curtailed and birds are left to scavenge for feed and water. The effect of water restriction on the growth performance was compared in Naked Neck (NNK) and Ovambo (OVB) chickens that are predominant in Southern Africa. A total of 54 eight-wk-old pullets each of NNK and OVB chickens with an initial average weight of $641{\pm}10g/bird$ were randomly assigned to three water intake treatments, each having six birds for 8 wk. The water restriction treatments were ad libitum, 70% of ad libitum and 40% of ad libitum intake. Nine experimental pens with a floor space of $3.3m^2$ per strain were used. The pens were housed in an open-sided house with cement floor deep littered with a 20 cm layer of untreated wood shavings. Feed was provided ad libitum. Average daily water intake (ADWI), BW at 16 weeks of age (FBW), ADG, ADFI, feed conversion ratio (FCR) and water to feed ratios (WFR) were determined. Ovambo chickens had superior (p<0.05) FBW, ADG and ADWI than NNK chickens. Body weight of birds at 16 weeks of age, ADG, ADFI, ADWI, and WFR declined progressively (p<0.05) with increasing severity of water restriction while FCR values increased (p<0.05) as the severity of water restriction increased. Naked Neck chickens had better FCR at the 40% of ad libitum water intake level than Ovambo chickens. The dressing percentage per bird was higher in water restricted birds than those on ad libitum water consumption, irrespective of strain. Heart weight was significantly lower in birds on 40% of ad libitum water intake than those on ad libitum and 70% of ad libitum water intake, respectively. In conclusion, NNK chickens performed better than OVB chickens under conditions of water restriction and would be ideal to raise for meat and egg production in locations where water shortages are a major challenge.

• 가정과삶의질연구
• /
• 제26권5호
• /
• pp.195-209
• /
• 2008

The purpose of this study was to provide basic information about design guidelines of activity areas in elderly nursing facilities. For the study, the activity areas of 44 facilities in Korea were investigated to categorize their spatial compositions and forms, and then a case study about 19 facilities was conducted to analyse their hierarchical characteristics. The results of the study were as follows: First, the major type of spatial composition among 44 research facilities was concentration, but compartment type was the main among unit-care facilities. By the year, all the types of spatial composition were evenly distributed during recent five years, while concentration type was about 40% before 2003. Second, the major form of activity areas was hall or corridor extension for large group. But there was more alcove or separation form among small group spaces. Third, in the case analysis about hierarchical characteristics, hall and corridor extension form met the requirements of accessibility and openness of public and semi-public areas. On the other hand, separation form had a problem in satisfying both requirements. The semi-private areas, which were around the elderly bedrooms and the elderly were able to watch activities in, were not sufficient in many facilities. Fourth, the division of public and semi-public area was mainly by furniture, and the individuality of semi-private area was defined by dead-end place and corner seats of the window or the corridor. The diversity of semi-private area was likely to be appeared in connection or distribution type. On the basis of the results, the basic design guidelines for activity areas in elderly nursing facilities could be suggested as follows: On the whole, connection or distribution type in spatial composition is more efficient for hierarchical flow than concentration or compartment type is, especially in Korean facilities having many elderly residents per floor. In detail, the design of public and semi-public area should be focused on their openness and accessibility. The recommended forms of activity areas were hall or corridor extension in public area, and living room, corridor extension, or large corridor in semi-public area to effectively function as large or small group spaces. In semi-private areas, the spatial diversity and individuality should be considered.

• Journal of the Korean Wood Science and Technology
• /
• 제17권1호
• /
• pp.22-54
• /
• 1989

Seasonal semi-greenhouse type solar-drying of 2.5cm-and 5.0cm-thick lumber of Quercus aliena Blume and Quercus variailis Blume was carried out to investigate the possibility of solar-drying of wood and to decide the active solar-drying period in Korea. In the active solar-drying period obtained solar-dehumidification, semi-greenhouse type solar-, air- and kiln-drying of 2.5cm -thick lumber of oaks were carried out to analyze drying-rates. -defects, and -yield in each drying-method and to calculate daily total absorbed solar-radiation the solar dryers. The energy balance equations were set up, considering all the energy requirements, to analyze the heat efficiencies of semi-greenhouse type solar and solar-dehumidification-dryer. In a seasonal drying the drying rate of semi-greenhouse type solar-dryer was highest in summer, and greater in fall, spring, and winter in order. Solar-drying time was 45% in summer to 50% in winter of the air-drying rime, and more serious drying-defects occurred in air-drying than in solar-drying. In the active solar-drying period. April, May, and June, the average drying rate in solar-dehumidification-drying was 1.0%/day and greater than 0.8%/day in semi-greenhouse type solar-drying. In solar-dehumidification-drying the time required to dry lumber to 10% moisture content was less than 60 days, and solar-dehumidification-drying showed the highest drying-yield, 65.01%, than the other drying methods. The daily total absorbed solar radiations were 8.51MJ on the roof collector and 6.22 MJ on the south wall collector. In the energy blance 69.48% of total energy input was lost by heat conduction through walls, roof. and floor 11.68% by heat leakage, 0.33% by heating the internal structures of the solar-dryer and 5.38% by air-venting. Therefore the heat efficiency of semi-greenhouse type solar-dryer 13.13%, was lower than that of solar-dehumidification-dryer, 14.04%. Solar-drying of lumber in Korea showed the possibility to reduce the air-drying-time in every season and the efficiency of solar-dehumidification drying was higher than that of semi-greenhouse type solar-drying.

• 한국조경학회지
• /
• 제44권5호
• /
• pp.81-91
• /
• 2016

이 연구는 장기미집행 도시공원의 해소와 활성화 방안으로 특례사업제도가 도입되었다. 민간공원추진자의 원활한 사업추진을 도모할 수 있도록 사업성 분석을 실시하여 특례사업 적용이 가능한지를 살펴보고자 하였다. 광주광역시 장기미집행 도시공원 3개소를 대상으로 사업성을 분석한 결과는 다음과 같다. 첫째, 분석대상의 광주광역시 장기미집행 3개소의 도시공원은 산림형 근린공원으로서, 특례사업의 공원조성비(평균 0.4%)가 차지하는 비율은 상대적으로 낮으나, 토지보상비(평균 33.8%)와 건물공사비(평균 59.1%)의 지출에 의해 사업수지에 많은 영향을 받는다. 둘째, 장기미집행 도시공원의 특례사업이 대규모 공원면적의 토지보상비와 건물공사비의 초기투입비가 과다하고, 장기간(5년 이상)에 걸친 회수 및 금융이자 등 시간의 경과를 감안하여 단순 비용편익보다는 순현가(NPV)를 적용하여 사업수지를 검토한 결과, 봉산공원은 순현가 기준 사업수지 균형 용적률은 179%, 적정이익 용적률은 220% 수준이며, 마륵공원은 균형 용적률 351%, 적정이익 용적률은 420%, 중외공원은 균형 용적률 327%, 적정이익 용적률은 400%이다. 셋째, 장기미집행 도시공원이 실효되기 전에 특례사업의 원활한 추진을 위해서는 광주광역시 도시계획위원회의 심의 시 비공원시설부지의 용도지역이 자연녹지지역에서 봉산공원은 제2종일반주거지역으로, 중외공원은 준주거지역으로의, 마륵공원은 일반상업지역으로 용도지역 변경이 이루어져야 민간공원추진자의 사업성 개선으로 사업추진이 가능한 것으로 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.65-70
• /
• 2010

This paper presents experimental performance evaluation of a magnetorheological (MR) damper for integrated isolation mount for ultra-precision manufacturing system. The vibration sources of the ultra-precision manufacturing system can be classified as follows: the one is the environmental vibration from the floor and the other is the transient vibration occurred from stage moving. The transient vibration occurred from the stage moving has serious adverse effect to the process because the vibration scale is quite larger than other vibrations. Therefore in this research, a semi-active MR damper, which can control the transient vibration, is adopted. Also the stage needs to be isolated from tiny vibrations from the floor. For this purpose, a dry-frictionless MR damper is required. In order to achieve this goal, a novel type of MR damper is originally designed and manufactured in this work. Subsequently, the damping force characteristics of MR damper are evaluated by simulation and experiment. In addition, the vibration control performance of the MR damper associated with the stage mass is evaluated.

• Steel and Composite Structures
• /
• 제23권1호
• /
• pp.115-130
• /
• 2017

A new type of moment-resisting bolted connection was developed for use in composite steel- concrete construction to connect composite open section steel beams to concrete filled steel square tubular columns. The connection was made possible using anchored blind bolts along with two through bolts. It was designed to act compositely with the in-situ reinforced concrete slab to achieve an enhanced stiffness and strength. The developed connection was incorporated in the design of a medium rise (five storey) commercial building which was located in low to medium seismicity regions. The lateral load resisting system for the design building consisted of moment resisting frames in two directions. A major full scale test on a sub-assembly of a perimeter moment-resisting frame of the model building was conducted to study the system behaviour incorporating the proposed connection. The behaviour of the proposed connection and its interaction with the floor slab under cyclic loading representing the earthquake events with return periods of 500 years and 2500 years was investigated. The proposed connection was categorized as semi rigid for unbraced frames based on the classification method presented in Eurocode 3. Furthermore, the proposed connection, composite with the floor slab, successfully provided adequate lateral load resistance for the model building.

• 한국소음진동공학회논문집
• /
• 제20권12호
• /
• pp.1161-1167
• /
• 2010

This paper presents experimental performance evaluation of a magnetorheological(MR) damper for integrated isolation mount for ultra-precision manufacturing system. The vibration sources of the ultra-precision manufacturing system can be classified as follows: the one is the environmental vibration from the floor and the other is the transient vibration occurred from stage moving. The transient vibration occurred from the stage moving has serious adverse effect to the process because the vibration scale is quite larger than other vibrations. Therefore in this research, a semi-active MR damper, which can control the transient vibration, is adopted. Also the stage needs to be isolated from tiny vibrations from the floor. For this purpose, a dry-frictionless MR damper is required. In order to achieve this goal, a novel type of MR damper is originally designed and manufactured in this work. Subsequently, the damping force characteristics of MR damper are evaluated by simulation and experiment. In addition, the vibration control performance of the MR damper associated with the stage mass is evaluated.

• 한국실내디자인학회논문집
• /
• 제37호
• /
• pp.95-102
• /
• 2003

It has been true that major investment among local business hotels were placed in furniture design character as there are increasing number of international events hosted by Korea. The study, under these circumstances, as a study In advance to see the design feature and trend of local business hotel's guest room furniture, has done interview with guest room manager, photographing of rooms, actual survey for analysing guest room plane surface, etc., researcher directly visiting 15 hotels that have special first grade businessmen only floor in Seoul. In addition, a survey has been done to know if each hotel room and furniture has particular image, from this survey the design feature of local business hotel's guest room has been analysed, and the result is as following. The result shows that similar pattern is applied in furniture placement of each guest room but for the furniture type and design concept, some try to re-design of wooden furniture available in Lee dynasty and others adopt European style like France and United Kingdom for the realization of semi-classic image. Typical material and color is red oak and maple.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.960-965
• /
• 2014

Transmission loss of specimen is calculated by measuring energy of incident and transmission and using reverberant room of large size. But normal measurement of transmission loss has trouble because it is actually demanded that large area and specimen of certain size is satisfied with condition of diffused sound field. Especially, in case of mechanical component, interested frequency band is mid-frequency band between 500 ~ 2k Hz, and it is used to be available to minimize a reverberation chamber under conditions satisfying acoustic one because production of specimen for transmission loss measurement has limit. But, as in semi-reverberation room, it is difficult to satisfy condition of diffuse sound field and modification factor is applied to complement that. Correction factor when measuring transmission loss using semi-reverberation chamber is required accuracy because it works as main factor determining reliability of reuslts on transmission loss. In this study, it is analyzed that an effect on correction factor based on varying materials and sizes of specimens in order to deduction of it. Also It is confirmed that applied by elicited correction factor with actual railway vehicle's floor has reliability.