• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.683-686
• /
• 2005

By now, we have been analysing the resistance values on 3 dimensional structure using experimental statical method or theoretical modeling, while devices miniaturizing reveals the limitation of the traditional methods to calculate 3 dimensional resistance. In addition, 2 dimensional analysing can not produce 3 dimensional characteristic following miniaturizing. To solve the limitations , we must do high level modeling of semi-conductor process. In this thesis, we analyzed the Laplace equation that is the basic and important for 3 dimensional structure resistance with computer simulation method and on the basis of this, analyzed the characteristic of resistance of 3 dimensional structure communication semiconductor device.

• Journal of the Korean Ceramic Society
• /
• v.12 no.2
• /
• pp.15-20
• /
• 1975

Ceramic resistors to be stable at high temperature were manufactured from using MgO, SiO2, SnO2, Bi2O3, and CeO2 by sintering in air at 125$0^{\circ}C$. Electrical resistivity with elevated temperatures was studied for the various system of the above oxides. The resistor, 1.0 MgO-1.0 SiO2-0.575 SnO2-0.005 Sb2O3-0.025 Bi2O3-0.013 CeO2 has the resistivity, (14.55$\pm$0.3)$\times$103 ohm in a temperature range from $25^{\circ}C$. to 80$0^{\circ}C$. It is concluded that the ceramics prepared by a dielectric compound and metal oxide semi-conductor has a good thermostability for electrical appliciations.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.5
• /
• pp.223-228
• /
• 2002

We have studied the characteristics of Raman scattering spectroscopy from $_ZnS{1-x}Te_x$ alloys in the whole range of Te composition x. The Raman spectra showed two-mode behaviors for those alloys. The Raman line shape showed the changes of an asymmetry and broadening of that with Te composition x. The asymmetric broadening of the line shape could be explained with a spatial correlation model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.258-263
• /
• 2005

The nearest variety of the industrial world requires using the high precision and resolution positioning technology to do a semi-conductor, information field , and measurement field. It is especially important for the positioning technology that makes up a proper controller, is affected by the minimal heat and vibration, and can control a structurally generated non-linear friction factor to determine the efficiency of the system. The paper is to analyze the vibration characteristic according to the speed of linear motor and grasp the dynamic characteristic through the modal test and show the verification of the experimental result and design parameters by using FEM(Finite Element Method). Also, it shows the optimum standard analyzed the acceleration patterns of the moving part that lead to the vibration source in linear motor. It presents the analyzed dynamic of linear motor in compliance with a change of the non-linear factor.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.174-175
• /
• 2011

본 논문에서는 자계소호(Magnetic Trun-Off) 원리를 이용한 전류제한기를 제안하였다. 본 한류기는 전력전자 소자를 이용하여 고장시 신속한 제어가 가능하고, 동작시 역전압 및 반발력이 발생하지 않으므로 고도의 동작 신뢰성을 확보할 수 있다는 장점이 있다. 또한 본 한류기는 유도형 초전도 한류기와 원리는 유사하나, 초전도 소자를 이용하지 않으므로 극저온 유지장치를 제거할 수 있고 ��치시 복귀 기술이 별도로 필요하지 않다는 장점이 있다. 따라서 본 한류기를 우리나라 전력계통에 적용한다면 차단기의 재폐로 동작책무를 완벽하게 만족하는 안정적인 계통운영이 가능할 뿐 아니라, 고장전류 증가에 따른 차단기 교체비용 절감이 가능하다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.10a
• /
• pp.211-214
• /
• 2000

The paper presents a case study with application of a performance measurement questionnaire in analyzing a semi-conductor-related manufacturing company. The case may contribute to the development of strategic performance measurement system. The questionnaire contains considerable non-financial measurement indices as well as financial ones, which may strengthen the strategic aspect of measurement system. The strategy, actions, and measures have to be balanced through communication process in an organization. The result shows the usefulness of the congruence and consensus analysis of performance factors in effectively managing strategic action programs and identifying investment task areas to be targeted.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.55-61
• /
• 1998

Recently, the needs of machining technologies of very small parts have been increasing with advent of micro-revolution. These technologies have mostly used the method applied to semi-conductor production process such as LIGA, etc. But they have serious difficulties to settle down in terms of workpiece materials, machining thickness, 3-dimensional structure. Therefore. mciro-machining technology using EDM(Electrical Discharge Machining) was proposed. It is very difficult to machine the micro-parts (microshaft, microhole) using conventional machining. Micro-machining using BDM can machine the micro-parts easily because it requires little machining force. This MEDM(Micro-EDM) need the capabilities to move a electrode and control a discharge energy precisely, and the gap control strategy to maintain the optimal discharge condition is necessary. Therefore, in this study, the new EDM machine with high precision motion stage and high-performance EDM device was developed. Using this MEDM machine, we have machined microshaft and microhole with various shapes and sizes.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.121-123
• /
• 2007

In this paper, a multiple-output converter using a coupledinductor is proposed. The Asymmetrical Half-Bridge Converter (AHBC), which is used as a master converter, obtains ZVS in the primary side switches. For the tight output voltage regulation of the slave output, the Secondary Side Post Regulator (SSPR) is adopted. The proposed magnetically coupled output filter inductor reduces the number of semi-conductor devices and magnetic components. Also, the circuit enables ZCS off switching in the SSPR MOSFET and rectifying diodes. The modes of operation which are caused by the coupled-inductor and post regulator are explained. The analyzed modes of operation of the proposed multiple-output converter are verified by the simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1023_1024
• /
• 2009

In this paper, a novel 10kV, 50A, 50kHz pulsed power supply based on IGBT stacks is proposed. Proposed scheme consists of series connected 12 IGBT to generate maximum 10kV output pulse and 10kW full bridge phase-shifted zero voltage switching converter to charge DC capacitor voltage. Each IGBTs are sustain the 830V of capacitor voltage at turn off interval. By turn on the each IGBT for the same time it gives the path for the series connection of charged capacitor. From above turn on and off procedure, high voltage repetitive pulse is applied to the load. The synchronization of gating signal is important of series operation of IGBTs. For gating signal synchronization, specially designed gate power circuit using full bridge inverter and pulse transformer is developed to generate IGBT gating signal.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.85-93
• /
• 1999

In this study, PC-based slicing machine and driving software were constructed for the purpose of automation of semi-conductor cutting process. The biggest feature of software is variation of parameter and include data base, signal monitoring, error report, corresponding action or automatic motion planing. Parameters were drawn and algorithms were developed to make software by GUI interface. The cutting experiment was done for sampled wafer to see the effectiveness of the soft automation. From the experimented and implemented results, it is shown that parameters for automation of slicing process could be drawn, then its algorithms constructed. It could be considered what is the merit of this slicing machine by comparing the PC-based and the NC-based.