• 한국분말재료학회지
• /
• 제11권3호
• /
• pp.224-232
• /
• 2004

Ni-diamond composite powders with nickel layer of round-top type on the surface of synthetic diamond (140/170 mesh) were prepared by the electroless plating method (EN) with semi-batch reactor. The effects of nickel concentration, feeding rates of reductant, temperature, reaction time and stirring speeds on the weight percentage and morphology of deposited Ni, mean particle size and specific surface area of the composite powders were investigated by Atomic Adsortion Spectrometer, SEM-EDX, PSA and BET. It was found that nucleated Ni-P islands, acted as catalytic sites for further deposition and grown into these relatively thick layers with nodule-type on the surface of diamond by a lateral growth mechanism. The weight percentage of Ni in the composite powder increased with reaction time, feeding rate of reductant and temperature, but decreased with stirring speed. The weight percentage of Ni in Ni-diamond composite powder was 55% at 150 min., 200 rpm and 7$0^{\circ}C$ .

• 공업화학
• /
• 제16권1호
• /
• pp.28-33
• /
• 2005

본 연구는 재자원화 기술개발의 일환으로 폐기물 생선내장으로부터 아미노산을 회수하기 위하여 아임계 및 초임계 가수분해반응을 수행하였다. 반 회분식 및 회분식 반응기를 이용하여 아미노산의 최적수율에 영향을 미치는 온도, 시간 등의 반응인자에 대한 영향에 관하여 연구하였다. 회분식 반응결과, 폐기물 생선내장으로부터 얻어진 전체적인 아미노산의 최적수율(137 mg/g-dry entrails)은 온도 $250^{\circ}C$ (p=4 MPa), 반응시간 60 min에서 얻을 수 있었다. 초임계조건(e.g., T=$400^{\circ}C$, P=45 MPa)에서는, 아미노산의 생성속도보다 분해속도가 빠른 관계로 수율이 감소하는 경향을 나타내었다. 본 연구결과 고수율의 아미노산을 생성하기 위해서는 저온 및 짧은 반응시간에서의 조작이 필요한 것을 알았다.

• 대한환경공학회지
• /
• 제36권12호
• /
• pp.865-872
• /
• 2014

본 연구는 수소가스 생산을 위한 brown water(소변을 제외한 대변 + 대변세척수 6 L)의 혐기성 소화 시, 음식물쓰레기 혼합 효과를 평가하기 위해 실시하였다. brown water와 음식물쓰레기의 적절한 혼합 비율을 찾기 위해 회분식 실험이 수행되었고, 도출된 결과는 연속운전 세미파일럿 규모 brown water의 혐기성 소화장치의 실험에 적용되었다. 회분식 실험에서 70%의 음식물쓰레기와 30%의 brown water을 혼합하였을 때 $6.92mmol\;H_2/g\;COD_{removed}$의 최대 수소생산수율을 나타내었다. 동일한 혼합비율로 투입한 음식물쓰레기 및 brown water의 세미파일럿 규모 혐기성 소화조를 운전하였을 때, 반응조 내부에서 수소생산의 중간산물인 butyric acid의 현저한 증가를 보였다. 이 때 수소 생산의 지표인 B/P (butyrate/propionate) 비는 52.64로 나타났고, 수소생산수율은 최대 $25.03mmol\;H_2/g\;COD_{removed}$로 나타났다. 이상의 실험적 연구결과 brown water의 혐기성 수소발효에서 음식물쓰레기의 혼합은 수소발생을 촉진하기 위한 좋은 대안임을 확인하였다.

• 한국미생물·생명공학회지
• /
• 제27권1호
• /
• pp.46-53
• /
• 1999

The purpose of this study was to optimize the conditions of continuous mixed culture of C.butyricum and R. spaeroides K-7, which were able to produce hydrogen using biomass-dreived substrate. To investigate the possibility of continuous culture, semi-continuous culture was carried out for 20 days. In semi-continuous culture using the reactor system, the replacement rate of fresh medium was 30% of total medium volume for the highest hydrogen evolution. In continuous culture, the optimum dilution rate was determined to be 0.05$h^{-1}$. The continuous culture produced 3.1 times as compared with the hydrogen on batch culture. On the other hand, the continuous mixed culture produced 1.3~2.1 times as much as hydrogen of the continuous monoculture of C. butyricum. When 10g of glucose in the media (1l) was supplied as a carbon source on continuous culture, mixed culture of C. butyricum and R. sphaeroides K-7 increased hydrogen evolution rate. Because considerable amount of glutamate was contained in waste water of glutamate fermentation, utilization of glutamate was examined in mixed culture. As a result of examination, production of hydorgen was slightly inhibited by high concentration of glutamate, more than 20mM, on continuous monoculture of R. sphaeroides K-7. On the other hand, both on continuous monoculture of C. butyricum and on mixed culture of C. butyricum and R. sphaeroides K-7, production of hydrogen was not inhibited by high concentration of glutamate such as 100mM. Hence this suggests that high concentration of waste water can be used as good substrate for hydrogen production on monoculture of C. butyricum and mixed culture of C. butyricum and R. sphaeroides K-7.

• 한국응용과학기술학회지
• /
• 제22권2호
• /
• pp.191-199
• /
• 2005

Removable protective adhesives for automobiles were synthesized by an emulsion polymerization of monomers such as n-butyl acrylate (BA), n-butyl methacrylate (BMA), acrylonitrile (AN), acrylic acid (AA) and 2-hydroxyethyl methacrylate (2-HEMA), in which AA and 2-HEMA were functional monomers. Potassium persulfate (KPS) was used as an initiator and sodium lauryl sulfate (SLS) was used as an emulsifier, and polyvinyl alcohol (PVA) was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch type reactor. Tensile strength, extension, peel strength, viscosity and solid content of the synthesized adhesives were tested. The optimum physical properties of the removable protective adhesives for automobiles were obtained with the composition of 0.43 mole BA, 0.57 mole AN, 0.21 mole BMA, 0.03 mole AA, and 0.03 mole 2-HEMA.

• 한국응용과학기술학회지
• /
• 제23권2호
• /
• pp.169-176
• /
• 2006

Acrylic adhesives for automobiles protection were prepared by emulsion polymerization. Monomers used were n-butyl acrylate(BA), acrylonitrile (AN), butyl methacrylate(BMA), glycidyl methacrylate(GMA), and acrylic acid (AA). Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was kept at 200 rpm. Water resistance, heat resistance, acid resistance, alkali resistance and smoke resistance were examined. As a result, when each 0.03 mole of GMA and AA was introduced, the adhesion properties and various above mentioned resistances of the prepared adhesives were satisfied the standard for automobiles.

• 한국수산과학회지
• /
• 제45권3호
• /
• pp.201-206
• /
• 2012

Supercritical carbon dioxide ($SCO_2$) extraction was used to recover concentrated proteins and to remove lipids and odor causing compounds from anchovy. Engraulis japonicus $SCO_2$ was used as the solvent for extraction, which was performed in a semi-batch flow reactor. The experimental conditions used were pressure, 15-25 MPa; temperature, $40-60^{\circ}C$ and sample size, 500 ${\mu}m$. The proteins obtained under these conditions performed well in a sensory evaluation; moreover, effective lipids and odor removal was achieved. The stability and characteristics of the proteins recovered with different solvents were also evaluated. The samples were sterilized by processing with $SCO_2$. Escherichia coli was not detected after storage for several days. The sensory characteristics were found to be superior to those of a sample produced by hexane extraction. Thus, the protein concentrate was obtained at $60^{\circ}C$ and 25 MPa was deemed valuable as a foodstuff.

• 한국응용과학기술학회지
• /
• 제22권4호
• /
• pp.332-338
• /
• 2005

This study was conducted to prepare acrylic removable protective coatings by emulsion polymerization. Monomers used were n-butyl acrylate, acrylonitrile, butyl methacrylate. Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was 200 rpm. Tensile strength, extension, peel strength, viscosity, and solid contents of the synthesized coatings were examined. The coatings prepared with BA:AN = 60:20 (in weight ratio) satisfied the standard for automobile in terms of extension and peel strength. When the concentration of BMA was in a range of $18{\sim}23$ wt%, the prepared coatings satisfied the standard for automobile in terms of peel strength and water resistance.

• 환경위생공학
• /
• 제4권1호
• /
• pp.43-52
• /
• 1989

A synthetic wastewater composed of powdered baby food and inorganic nutrients was treated by five 3.6L anaerobic reactors in order to test the relationship between solids retention time (SRT) and media surface ratio, and the removal efficiencies of organic substrate. Of the five reactors, four were semi-continuously fed stirred-tank reactors and one continuously-stirred batch reactor. The influent was 7430mg/L in COD, 7120 mg/L $BOD_L$ and 6350mg/L in $BOD_5$, respectively. Operating temperature was $35{\pm}1^{\circ}C$ and pH in the range 6.9 to 7.2. In this experimental study it was found that a linear relationship existed, within the experiment range, between SRT and media surface ratio, and that SRT and removal efficiency increased with increasing media surface ratio. The substrate removal efficiencies were 82.7 to $88.2\%$ in COD, 82.9 to $88.4\%$ in $BOD_L$ and 83.3 to $88.7\%$ in $BOD_5$, respectively.

• 유기물자원화
• /
• 제30권4호
• /
• pp.109-122
• /
• 2022

현재 국내 양돈농가에서 발생하는 돼지분뇨 성상은 수분함량이 97% 정도인 슬러리 형태가 대부분이다. 돈사에서 배출되는 돼지분뇨 슬러리는 돼지의 분뇨와 돈사 내부 청소 물 등이 혼합된 성상의 액상물질이다. 본 연구에서는 공기공급 여부와 저장기간의 경과에 따른 돼지분뇨 액비의 부숙정도와 성상변화를 분석하기 위하여, 국내에서 운용 중인 액비화시설의 후단 공정에서 채취한 돼지분뇨 슬러리를 재료로 하여 120일 동안 실험을 수행하였다. 밀폐형 회분식 반응조를 이용하여 실험을 수행한 결과, 돼지분뇨 슬러리 액비의 부숙도는 공기공급구가 비공급구에 비해 더 양호하였으며 액비 저장기간이 경과 함에 따라서 액비가 부숙완료 상태로 빨리 전환되는 경향이 있었다. 실험개시 시에 97.90% 수준이던 액비의 수분함량 평균값이 실험 완료 시에는 공기공급구의 경우 96.82%, 비 공급구는 97.33% 수준을 나타냄으로써 공기공급구에서의 수분함량 감소가 상대적으로 더 높았다. 실험개시시에 8.82 수준이었던 액비의 pH는 실험완료 시에 공기공급구에서는 7.57, 비 공급구에서는 8.75 수준으로 변화하였다. 액비 중의 질소함량은 실험개시 시에 평균 0.198 mg/L 수준이었으나 실험완료 시에는 공기공급구에서는 0.076 mg/L, 비 공급구에서는 0.121 mg/L 수준으로 낮아졌다. 액비 중의 인산(P₂O₅)농도는 저장기간의 경과에 따라 비폭기처리구가 폭기처리구에 비해 감소 정도가 상대적으로 더 높았다. 실험결과를 종합해볼 때 돼지분뇨 액비에 공기를 공급하는 경우 그리고 저장기간을 길게 하였을 때 액비품질이 개선되는 것으로 판단된다.