• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.865-875
• /
• 1998

The purpose of this study was to investigate the angle formed by the Sella-Nasion(SN) plane and Frankfort-Horizontal(FH) plane and evaluate the correlation and difference of the FH plane to other horizontal reference planes. Through this study we hope to present a basis for selecting a horizontal reference plae which can be implemented in cephalometric studies and in surgical orthodontic treatment planning. 600 subjects were chosen following a clinical examination md lateral cephlometric X-rays were taken. According to cephalometric analysis the subjects were classified into 3 groups , Skeletal Class I malocclusion or normal occlusion group(male 50, female 50), Skeletal Class II malocclusion group(male 50, female 65) and Skeletal Class III malocclusion group(male 50, female 50). The results were as follows. 1. The angle formed by the SN plane and FH plane showed no difference among the malocclusion groups, but there was a significant sex difference. For males the angle measured was $7.47^{\circ}{\pm}2.40^{\circ}$ whereas for females it was $8.93^{\circ}{\pm}2.72^{\circ}$. 2. The angle formed by the SN plane or FH plane and Mandibular plane was higher in females for all malocclusion groups. This angle in the Skeletal Class I malocclusion group was lower than in the other two groups. 3. There was no difference among the sexes or malocclusion groups considering the angle formed by the FH plane and Palatal plane. 4. The genial angle in the Skeletal Class III malocclusion group was higher than in the Skeletal Class I and Class II malocclusion groups in both sexes.

• The korean journal of orthodontics
• /
• v.17 no.1
• /
• pp.47-54
• /
• 1987

This study was designed to compare extreme variations in facial growth in order to examine the relationships between the glenoid fossa position and skeletal malocclusions. It was hypothesized that patients with large mandibular plane-sella nasion angles would have a more superior fossa position than patients with small mandibular plane-sella nasion angles. It was also hypothesized that patients with large ANB angles would have a more posterior fossa position than patients with small ANB angle. For this study, the data from lateral roentgenocephaloprams of 72 Females and 72 males aged from 10 to 18 years were used. The results were as follows 1. In the case of large ANB angle, glenoid fossa position was relatively posterior than that of small ANB angle in Female, but it was not significant in male. 2. In the case of large APDI, glenoid fossa position was relatively anterior in female, but it was not significant in male. 3. In the case of large SN-Go Gn angle, glenoid fossa position was relatively superior in both male and female. 4. In the case of large ODI, glenoid fossa position was relatively inferior in both male and female.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.251-265
• /
• 1999

Various types of horizontal reference planes are used for diagnosis, treatment planning and evaluation of treatment results. But these reference Planes lack accuracy and repro-ducibility, and are mainly for Caucasian. Unlike the adult patients who have completed growth, the horizontal reference planes for growing children may change continuously during growth. Therefore this must be considered in selecting the horizontal reference plane. The purpose of this study was to Investigate the angle formed by the Sella-Nasion(SN) plane and Frankfort-Horizontal(FH) plane and evaluate the angle formed by FH plane and other horizontal reference planes in relation to different skeletal maturity and malocclusion types. 540 subjects with no orthodontic treatment history were chosen, and hand -wrist X-rays and lateral cephalometric X-rays were taken. According to SMA(Skeletal Maturity Assessment) of hand-wrist X-rays, the subjects were classified into 3 skeletal maturity groups : SMI 1-4 for group A, SMI 5-7 for group B and SMI 8-11 for group C. A second classification was made according to cephalometric analysis of lateral cephalograms. The subjects were classified into 3 malocclusion groups : Skeletal Class I, II and III malocclusion group. 10 measurements were evaluated. The results were as follows. 1. The angle formed by the SN plane and FH plane showed no difference among skeletal maturity groups, malocclusion groups, and between .sexes. 2. The angles formed by the SN plane and FH plane were $8.27^{\circ}{\pm}2.31^{\circ}$ for males and $8.59^{\circ}{\pm}2.24^{\circ}$ for females. The average value for females and males was $8.42^{\circ}{\pm}2.28^{\circ}$. 3. The angle formed by the FH plane and palatal plane was almost constant showing no difference among skeletal maturity groups, malocclusion groups, and between sexes($1.09^{\circ}{\pm}3.21^{\circ}$).

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.20 no.1
• /
• pp.19-27
• /
• 1990

The primary objective of this study was to analyze the hard and soft tissue profile and comparison of the both sexes in Korean adults using roentgenocephalometry. The subjects were 122 males and 116 females from 18 to 22 years of age selected on the basis of their excellent occlusion and harmonious profile. It was an investigation about the interrelationships in the angles which consisted of Frankfort horizontal plane (FH plane), Sella Nasion plane (SN plane), Nasal floor plane (NF plane) and Mandibular plane (Md plane) as reference planes, and of the axial inclinations of the upper anterior tooth to Nasal floor plane (NF Plane) and of the lower anterior tooth to Mandibular plane (Md Plane). Among the 14 categories estabilishied on the soft tissue land marks, the 6 categories were studied for the relationship to Frankfort horizontal plane (FH Plane), and the 8 categories were studied for the soft tissue contour. The results were as follows: 1. Among 8 measured angles in the hard tissue, the angle of FH-Md, NF-Md and SN-Md were greater in females than in males. 2. The axial inclinations of the anterior teeth to NF Plane and Md plane were slightly greater in males than In females. 3. Among 14 measured angles in the soft tissue, the angles of G-Sn-P and E-Pog-Sn were greater in males, and FH-G-Sn, GㆍSn-Sn. Pog and Pog-Sn-P were greater in females. 4. In males, the variability of measured values in both lips region were high.

• The korean journal of orthodontics
• /
• v.48 no.1
• /
• pp.11-22
• /
• 2018

Objective: The aim of this study was to determine cephalometric factors that help predict favorable soft-tissue profile outcomes following treatment with the Class II Twin-block appliance. Methods: Pre- and post-treatment lateral cephalograms of 45 patients treated with the Class II Twin-block appliance were retrospectively analyzed. Profile silhouettes were drawn from the cephalograms and evaluated by three orthodontists in order to determine the extent of improvement. Samples were divided into a favorable group (upper 30% of visual analogue scale [VAS] scores, n = 14) and an unfavorable group (lower 30% of VAS scores, n = 14). Skeletal and soft-tissue measurements were performed on the cephalograms and an intergroup comparison was conducted. Results: An independent t-test revealed that the following pre-treatment values were lower in the favorable group compared to the unfavorable group: lower incisor to mandibular plane angle, lower incisor to pogonion distance, point A-nasion-point B angle, sella-nasion line (SN) to maxillary plane angle, SN to mandibular plane angle, gonial angle, and symphysis inclination. The favorable group had a larger incisor inclination to occlusal plane. Moreover, the favorable group showed larger post-treatment changes in gonial angle, B point projection, and pogonion projection than did the unfavorable group. Conclusions: Class II malocclusion patients with a low divergent skeletal pattern and reduced lower incisor protrusions are likely to show more improvement in soft-tissue profile outcomes following Class II Twin-block treatment.

• The korean journal of orthodontics
• /
• v.40 no.6
• /
• pp.421-431
• /
• 2010

Objective: This study aimed to verify the intra-individual reproducibility of the natural head position (NHP) in adult Korean patients in the centric relation (CR) position and to prove the inter-individual variability of the Frankfurt horizontal (FH) plane and sella-nasion (SN) line compared to the true horizontal line (THL). In addition, the study aimed to investigate the correlations between linear measurements from A-point and B-point to the nasion true vertical line (NTVL) and angular measurements from A-point and B-point to the SN line. Methods: Two lateral cephalograms were taken of 116 subjects (23 males, 93 females) with CR wax bites in a NHP at a one-week interval. Results: Method errors of three variables and intraclass correlation coefficients of six parameters proved the intra-individual reproducibility of NHP (p < 0.001). The angle of the FH to the THL was not significantly different from $0^{\circ}$ (p > 0.05), but it was clinically variable (SD $3.89^{\circ}$) on the inter-individual level. Conversely, the angle of the SN line to the THL was significantly different from $7^{\circ}$ (p < 0.05). Very low correlation was found between the linear measurements and angular measurements of A-point and B-point (p < 0.01). Conclusions: The NTVL could be a useful reference line for assessing the antero-posterior position of the maxilla and mandible of Korean adult patients in NHP and CR.

• The korean journal of orthodontics
• /
• v.12 no.1
• /
• pp.21-26
• /
• 1982

This study was undertaken to document relations between facial skeletal pattern and dental occlusion. The data in .this study were collected from pretreatment cephalometric radiographs and study models of patients' records present in the files of Orthodontic Department, Seoul National University Hospital. Patients were selected on the basis of a mandibular plane-sella nasion angle equal to or greater than $38^{\circ}$ (high SN-MP angle) or equal to or less than $26^{\circ}$ (low SN-MP angle). Patients in the mixed dentition and with missing permanent teeth were excluded for ease of assessing tooth size / arch circumference relationships and then 30 high SN-MP and 11 low SN-MP patients were selected among them. The mean age of these two groups of patients was high SN-MP, $12.8{\pm}1.23$ years and low SN-MP, $13.0{\pm}1.48$ years. The following conclusions were obtained. 1. In the maxilla and mandible the mean tooth size of high SN-MP patients was nearlly identical to the low SN-MP patients. 2. The mean maxillary arch circumference was increased in low SN-MP group compared with high SN-MP group and a smilar, but smaller, mean increase was present in mandible. 3. The difference between the mean maxillary circumference required and the mean maillary circumference present ranged from -4.8mm in the high SN-MP group to -1.3mm in the low SN-MP group. A small range of means occurred in the mandible (high SN-MP: -4.0mm to low SN-MP: -1.8mm). 4. In the maxilla and mandible the mean arch length was nearly identical in the high and low SN-MP groups. 5. The mean incisor inclination was increased as the SN-MP angle decreased in the maxilla and mandible. 6. The men distance of the maxillary first molar from anterior border of the pterygomaxillary fissure was nearly similar between high and low groups. 7. The mean mandibular intermolar width was increased from high SN-MP to low SN-MP patients.

• The korean journal of orthodontics
• /
• v.51 no.1
• /
• pp.15-22
• /
• 2021

Objective: The aim of this study was to evaluate the correlation between the vertical position of maxillary first molar and vertical skeletal measurements in lateral cephalograms by using new linear measurements on the vertical axis of coordinates with calibration. Methods: The vertical position of maxillary first molar (U6-SN), and the conventionally used variables (ConV) and the newly derived linear variables (NwLin) for vertical skeletal patterns were measured in the lateral cephalograms of 103 Korean adults with normal occlusions. Pearson correlation analyses and multiple linear regression analyses were performed with and without calibration using the anterior and posterior cranial base (ACB and PCB, respectively) lengths to identify variables related to U6-SN. Results: The PCB-calibrated statistics showed the best power of explanation. ConV indicating skeletal hyperdivergency was significantly correlated with U6-SN. Six NwLin regarding the position of palatal plane were positively correlated with U6-SN. Each multiple linear regression analysis generated a two-variable model: sella and nasion to palatal plane. Among the three models, the PCB-calibrated model yielded highest adjusted R2 value, 0.880. Conclusions: U6-SN could be determined by the vertical position of the maxilla, which could then be used to plan the amount of molar intrusion and estimate its clinical stability. Cephalometric calibration on the vertical axis of coordinates by using PCB for vertical linear measurements could strengthen the analysis itself.

• The korean journal of orthodontics
• /
• v.49 no.6
• /
• pp.360-371
• /
• 2019

Objective: We sought to determine the predictors of midpalatal suture expansion by miniscrew-assisted rapid palatal expansion (MARPE) in young adults. Methods: The following variables were selected as possible predictors: chronological age, palate length and depth, midpalatal suture maturation (MPSM) stage, midpalatal suture density (MPSD) ratio, the sella-nasion (SN)-mandibular plane (MP) angle as an indicator of the vertical skeletal pattern, and the point A-nasion-point B (ANB) angle for anteroposterior skeletal classification. For 31 patients (mean age, 22.52 years) who underwent MARPE treatment, palate length and depth, MPSM stage and MPSD ratio from the initial cone-beam computed tomography images, and the SN-MP angle and ANB angle from lateral cephalograms were assessed. The midpalatal suture opening ratio was calculated from the midpalatal suture opening width measured in periapical radiographs and the MARPE screw expansion. Statistical analyses of correlations were performed for the entire patient group of 31 subjects and subgroups categorized by sex, vertical skeletal pattern, and anteroposterior skeletal classification. Results: In the entire patient group, the midpalatal suture opening ratio showed statistically significant negative correlations with age, palate length, and MPSM stage (r = -0.506, -0.494, and -0.746, respectively, all p < 0.01). In subgroup analyses, a strong negative correlation was observed with the palate depth in the skeletal Class II subgroup (r = -0.900, p < 0.05). Conclusions: The findings of this study indicated that age, palate length, and MPSM stage can be predictors of midpalatal suture expansion by MARPE in young adults.

• The korean journal of orthodontics
• /
• v.5 no.1
• /
• pp.57-63
• /
• 1975

For the purposes of augmentation of the aid for case analysis and diagnosis of malocclusion, a roentgenocephalometric study was made from 84 Korean adolescences. The Subjects consist of 42 males and 42 females aged from 17 to 20 years with normal occlusion and acceptable facial appearance. The author measured 18 angles and 14 linear distances as suggested by Jarabak. The following results were obtained. 1) Each linear measurement of the males' skull was greaten than that of the females. 2) The posterior to anterior facial height was $69.2\%$ in the males and $67.1\%$ in the females. 3) In the relationship of upper lip to esthetic line, the lip of females was more behind than that of males. 4) Saddle angle was $124.7^{\circ}$, articular angle was $148.7^{\circ}$, genial angle was $119.4^{\circ}$ and upper and lower genial angles were $45.1^{\circ}\;(N-Go-a^{\circ})$ and $74.2^{\circ}\;(N-Go-Me^{\circ})$. 5) The ratio of mandibular body to anterior cranial base was about 1:1. 1. 6) The angulations of $SNA^{\circ},\;SNB^{\circ}\;and\;SNP^{\circ}$ were as follows; $SNA^{\circ},\;80.3^{\circ},\;SNB^{\circ},\;79.8^{\circ},\;SNP^{\circ},\;81.1^{\circ}$. 7) The angle of the sella-nasion plane to the mandibular plane $(SNG^{\circ}Me^{\circ})$ was $32.0^{\circ}$ and that of the occlusal plane to the mandibular plane was $18.2^{\circ}$. 8) The angle of the maxillary central incisor to the sellanasion plane $(1-SN^{\circ})$ was $105.6^{\circ}$. That of the mandibular central incisor to the mandibular plane $(1-GoMe^{\circ})$ was $94.0^{\circ}$, and the interincisal angle $(1\;to\;1^{\circ})$ was $127.6^{\circ}$. 9) The linear distance from incisal edge of upper central incisor to facial plane was 8.0mm and that of lower central incisor was 4.6mm. 10) In the relationship of the lower lip to the esthetic line, the lower lip was 0.2mm front of the esthetic line.