• 동력기계공학회지
• /
• 제3권4호
• /
• pp.69-78
• /
• 1999

In the single-input and single-output system, the parameter of plant is scalar polynomial, but in the multiple input and multiple output, it accompanies, being matrix polynomial, the consideration of observable controlability index or problems non-commutation in matrix polynomial as well as degree, and it is more complex to deal with. Therefore, it is thought that a full research on the single-input and single-output system is not sufficient. This paper proposes that problems of minimum variance self-tuning regulator by using numerical calculation example of multivariable system and pole assignment self-tuning regulator.

• 한국항행학회논문지
• /
• 제20권3호
• /
• pp.226-231
• /
• 2016

이동로봇의 제어는 로봇 분야에 있어 중요한 이슈이다. 이동로봇의 자율주행은 다양한 작업 환경에서 중시되고 있다. 자율 주행을 위해 이동로봇은 장애물을 감지, 회피하며 지능시스템을 도입한 제어 방식들을 사용해 충돌회피의 성능을 보완하는 연구가 활발히 진행되고 있다. 본 논문에서는 이동 로봇의 기구학적 모델을 분석하고 조향각 제어를 위한 type-2 fuzzy self-tuning PID 제어기를 설계하였다. Type-2 fuzzy 제어기는 type-1 fuzzy 제어기와 달리 복수 개의 값을 가지므로 언어표현의 모호함의 자유도가 높다. 본 논문에서는 설계된 제어기와 기존의 PID 제어기, type-1 fuzzy self-tuning PID 제어기를 비교하기 위한 방법으로 MATLAB Simulink를 사용하여 시뮬레이션을 하였다. 시뮬레이션 비교 결과 기존의 PID제어기와 type-1 fuzzy self-tuning PID 제어기의 성능보다 type-2 fuzzy self-tuning PID 제어기의 성능이 우수하다는 것을 확인하였다.

• 한국정밀공학회지
• /
• 제13권5호
• /
• pp.139-147
• /
• 1996

PID control has been widely used for real control systems. Particularly, there are many researches on control schemes of tuning PID gains. However, to the best of our knowledge, there is no result for discrete-time systems with unknown time-delay and unknown system parameters. On the other hand, Generalized predictive control has been reported as a useful self-tuning control technique for systems with unknown time-delay. So, in this study, based on minimization of a GPC criterion, we present a self-tuning PID control algorithm for unknown papameters and unknown time-delay system. A numerical simulation was presented to illustrate the effectiveness of this method.

• 제어로봇시스템학회논문지
• /
• 제4권1호
• /
• pp.68-75
• /
• 1998

The Intelligent Cruise Control system, ICC, is a driver assisting system for controlling relative speed and distance between two vehicles in the same lane. The ICC may be considered as an extension of a traditional cruise control, not only keeping a fixed speed of the vehicle, but correcting the speed also to that of a slower one ahead. This paper presents a real-time self-tuning fuzzy control algorithm to develop ICC. The self-tuning fuzzy control law is adopted to reduce the effects of nonlinearities of the vehicle and various road environments. In the self-tuning algorithm an interior penalty method is applied to preserve the inherent order of membership functions and is modified as an on-line algorithm for real time application. Via simulations, the performance of the suggested control algorithm is compared with a PID and a fuzzy control without self-tuning. The suggested control algorithm is implemented on PRV III and the results of the test driving on a local road are given.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1995년도 추계학술대회 학술발표 논문집
• /
• pp.25-28
• /
• 1995

A Practical application of self-tuning fuzzy controller to a multi-input multi-output complex system of a vehicle engine is investigated. The ovjective is to design a controller to improve the transient performance in torque and RPM mode changes. For the performance improvement in the multivariable comples system, the self-tuning function of internal parameters is essential and practical. The measured output variables using different control schemes are compared the advanteges of the self-tuning fuzzy logic controller are better output performances and the effectiveness in the controller design using many parameters.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권1호
• /
• pp.40-46
• /
• 1999

A self-tuning FPID(Fuzzy Proportional Intergral Derivative) controller fo load frequency control of 2-area power systemis proposed in this paper. The paramters of the proposed self-tuning FPID controller are self-tuned by the proposed fuzzy inference technique. Therefore in this paper the fuzzy inference technique of PID gains using PSGM(Product Sum Gravity Method) is presented and is applied to the load frequency control of 2-area power system. The computer simulation results show that the proposed controller give better more control characteristics than convention-al PID, FLC under load changes.

• 조명전기설비학회논문지
• /
• 제23권11호
• /
• pp.69-75
• /
• 2009

In this paper, a self-tuning regulator for a speed control of a permanent magnet type stepping motor is proposed. The self-tuning theory provides a nonlinear modeling of a stepping motor drive system and can provide the controller with information regarding the reference variation and parameter variation of the stepping motor through the on-line estimation. The proposed self-tuning regulator organize the positive feedback loop and IP(Integral-Proportional) type. Therefore, the proposed self-tuning regulator has a robust control capabilities during dynamic operation. The availability of the proposed controller is verified through experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.78-82
• /
• 1986

In the process control applications of self tuning control, a major concern of the control problem is to handle an offset caused by load disturbances and random steps occuring at random instance of time. Conventionally an integrator is incorperated in the forward path of the controller to eliminate such an offset. But this approach causes a difficulty if the adaptive part of the resultant controller is to be evaluated. In this paper a method of analyzing the adaptive system and improving the offset effect is suggested for a class of referance model method in the self tuning adaptive control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.214-217
• /
• 1987

In this paper self tuning control of interconnected systems are dealt in view point of large scale system control. The plant model is given in multiple ARMA process. This process is simplified as independent SISO ARMA process having offset terms. This offset was considered as effects of interconnections. In each decentralized system, self tuning controller with instrumental variable method is adopted. As a result, this algorithm enables the parameter estimation to be unbiased and non-drift. This controller contains a new implicit offset rejection technique. Simulation results considers well with the analysis in case of linear interconnection.

• 전자공학회논문지T
• /
• 제35T권3호
• /
• pp.87-95
• /
• 1998

본 논문에서는 시스템의 차수가 고차이며 잡음과 시간지연이 있고 시스템의 파라미터가 변하는 비최소위상 시스템에 적응할 수 있는 자기동조 제어기의 설계 하중다항식 계수를 온라인으로 조정하는 방법을 제안한다. 일반화 최소분산 자기동조 제어기의 설계 하중다항식 계수 값은 확률 근사법인 Robbins-Monro알고리즘을 이용하여 온라인으로 얻으며 자기동조 제어기의 파라미터는 순환최소자승법으로 추정하였다. 제안한 자기동조 제어 방법은 다른 자기동조 제어 방법들11.21보다 간단하고 효과적이다. 제어 알고리즘의 타당성을 확인하기 위해 일정한 시간이 경과한 후 시스템의 파라미터가 변하고 시스템의 영점이 단위원 밖에 있는 고차 시스템에 대해 컴퓨터 시뮬레이션을 하였다.