• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.511-519
• /
• 2019

The purpose of this study was to investigate the status of infection control in dental office and the degree of infection control practice of dental hygienists. A self-reported questionnaire was answered by 193 dental hygienists working in dental hospitals or dental clinics in Gyeonggi and Incheon areas. The number of bacteria was measured sample of surface dental unit chair shoulder backrests and light handles from 19 dental hospitals and 28 dental clinics. It was responded that impression or occlusion bodies were routinely disinfected in 52.6% of the dental hospitals and dental prosthesis were routinely disinfected in 46.4% in dental clinics. The dental hospital and clinics disinfect the surface each 26.3%, 25% after the patient treatment. The dental hospital and clinic were detected bacteria $5.02^*10\^3CFU/mL$, $1^*10\^4CFU/mL$, from dental unit chair backrest, respectively and $8.32^*10\^3CFU/mL$, $4.26^*10\^4CFU/mL$ from light handles, respectively. At the conclusion of this investigation, it can be kept from infection source in dental office is to make the right selection and use of the personal protective equipments and to improve the practice level by regular and active education. The same infection control practice should be done by institutionalizing and mandating infection control practice.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.314-323
• /
• 2021

The purpose of this study is to analyze the status of medical service use of foreigners living in Korea by their nationality and types of national health insurance. As of 2018, 1,058,886 people were extracted from the qualification DB, excluding people whose insurance premium is missing. The data analysis showed that nearly 78% of foreigners with national health insurance used medical services and the countries with the largest number of users were China, Vietnam, and the United States. The total cost of treatment per capita was highest in the United States regardless of hospitalization and outpatient. The number of medical treatments per person, and the medical expenses of outpatients & inpatients services were highest among the regionally-insured and the length of stay per person was highest among the workers' dependents. Lastly, it was found that Chinese and regionally-insured received much more benefits than other groups compared to the premium they pay. After July 2019, foreign nationals residing in Korea for six months or longer are obligated to enroll in the national health insurance program. Since the latest data was in 2018, the result did not properly reflect the current situation, but it is meaningful that it made basic data for future comparative analysis.

• Economic and Environmental Geology
• /
• v.56 no.2
• /
• pp.201-215
• /
• 2023

In the stone-lined tombs from Cheongyang Rokpyeong-ri site, several stone-lined tombs corresponding to the Three Kingdoms Period, Unified Silla Period and Goryeo Dynasty were excavated. In this study, the stone properties of petrological, mineralogical and geochemical characteristics from 15 stone-lined tombs were analyzed, the rock species and occupation rate were reviewed, also the provenance area was interpreted. There are five types of rocks used as members of the tombs, including black sandstone, greywacke, slate, conglomerate and gneiss. As a result of magnetic susceptibilities, the rocks of the tombs and presumed provenance are all shown in the same range, and the similarity between the tombs and the source area is high in geochemical behavior characteristics. The stone properties of the tombs are the same as the presumed provenance rocks and is distributed within a 500m around the bedrock of the tombs in the excavation site, so it seems that self-sufficiency was possible on the site without a special procurement system. These stones are interpreted to have been constructed through some trimming without any special technique, but some stone tombs have been confirmed to used homogeneous black sandstone at the bottom of the tombs, so it is believed that there were artificial selection of stones.

• Knowledge Management Research
• /
• v.23 no.4
• /
• pp.177-205
• /
• 2022

Small- and medium-sized enterprises (SMEs) have strong incentives to engage in open innovation to enhance innovation efficiency and effectiveness due to their 'liability of smallness.' Previous research examined the performance effects of various open innovation practices, but whether coupled open innovation practices positively affect SMEs' firm performance is somewhat controversial. To resolve the issue, this study examined the effects of coupled open innovation activities on SMEs' firm performance using Heckman's two stage model to control endogeneity of the firms' self-selection bias in open innovation engagement. This study used the Korean Innovation Survey (KIS) 2020 collected by the Science and Technology Policy Institute (STEPI), and tested the effects of SMEs' coupled open innovation activities, R&D and non-R&D cooperation, on their innovative and financial performance indicators. The results showed that SMEs' R&D cooperation positively affects the new-to-market (NTM) product innovation only. Moreover, SMEs' non-R&D cooperation has positive effects on the product innovation, business process innovation, new-to-the-market product innovation, and new-to-firm (NTF) product innovation. However, the results showed that both R&D and non-R&D innovation cooperation activities have no significant effects on SMEs' financial performance indicators. This study contributes to research on SMEs' open innovation and provides insights for SMEs' managers and policymakers.

• The Korean Journal of Franchise Management
• /
• v.8 no.4
• /
• pp.7-19
• /
• 2017

Purpose - The purpose of this study is to investigate the effect of model attractiveness on brand attitude and purchase intention, and examine whether product-model match-up plays a moderating role in the relationship between model attractiveness and brand attitude and purchase intention. The model attractiveness is consist of psychological and physical attractiveness of the model. The authors investigate how product-model match-up influence the strength of the relationship between model attractiveness - brand attitude and purchase intention. The purpose of this is to test whether product-model match-up influence the form and effectiveness of a model attractiveness on brand attitude and purchase intention and suggest the effective and efficient methods in the model selection strategies to increase advertising effectiveness based on the results of this study. Research design, data, and methodology - The experimental design for this study was the between subject design based on 2 group of the psychological attractiveness(high vs. low) × product-model match-up(high vs low) and 2 group of the physical attractiveness(high vs. low) × product-model match-up(high vs low). And a preliminary investigation was conducted to develop experimental stimuli through manipulation check to enhance the external validity of experimental research. The attractiveness of the model and product-model match-up are independent variables and manipulative variables in presentation of experimental stimuli. The self-administered methode experiment was conducted on 300 subjects in four groups constructed according to the independent variables. Result - The findings provide partial support for a moderator for product-model match-up on the model attractiveness - brand attitude and purchase intention. First, the influence of psychological attractiveness and physical attractiveness on brand attitude and purchase intention was shown significant. Also, it was found that the average value of brand attitude and purchase intention according to psychological attractiveness was significantly higher than the average value of brand attitude and purchase intention according to physical attractiveness in additional analysis. Second, the average value of brand attitude and purchase intention were higher when product - model match-up was high in both high and low psychological attractiveness and physical attractiveness of the model. However, in the case of psychological attractiveness, the correlation effect with product - model match-up was significant, but in the case of physical attractiveness, it was not significant. Conclusions - The results of this study suggest that the attractiveness factor should be considered in selecting the ad model by verifying the effect of the attractiveness of the model on the advertising effect. In particular, this study has great significance both academically and practically in terms of suggesting such implications that the advertising effect of psychological attractiveness and physical attractiveness may be different depending on the product type by additional analysis.

• Asia Marketing Journal
• /
• v.14 no.3
• /
• pp.49-68
• /
• 2012

When a channel is vertically separated, there can be inefficiencies, double marginalization. Channel coordination to amend this inefficiency has been an important issue in marketing and economics. Channel coordination deals with maximization of joint profit and achieving proper profit sharing among participants. In this paper, a manufacturer and heterogeneous multiple retailers with exclusive territory are assumed, and channel coordination with two-part tariff is considered. When multiple heterogeneous retailers are assumed, profit sharing can be an issue even though the tariffs based on marginal cost can maximize joint profit. In case of multiple heterogeneous retailers, the manufacturer earns the same profit (fixed fee) from each retailer. This means that a large retailer occupies all the gaps of channel profit between small and large markets. Then, the manufacturer, which generally plays the role of Stackelberg leader, will consider increasing fixed price or marginal price to earn more profit from large retailer. Those reactions can sacrifice maximization of joint profit by making small retailer withdraw or by changing the sales quantities. In this paper, to maximize joint profit and achieve proper profit sharing, two kinds of optional tariffs are considered. The first is an optional two-part tariff based on marginal cost and the second is an optional modified two-part tariff in which marginal prices are higher than the manufacturer's marginal cost. In both types of optional tariffs, maximization of joint profit in each market can be achieved. Moreover, optional tariffs alleviate the problem of profit sharing. Optional tariffs can provide a manufacturer more profit from a large retailer when profit from a small retailer is given. However, the analysis shows that the maximum share of manufacturer from a large retailer is restricted by the condition for self-selection. In case of optional two-part tariffs based on marginal cost, if the gap between demands is large, the maximum share of the manufacturer is sufficient to achieve proper profit sharing. If the gap between demands is not sufficiently large, the manufacturer cannot earn sufficient share from increased profit. An optional modified two-part tariff where marginal price is more than marginal cost of manufacturer is considered because of this scenario. The marginal price above the marginal cost may additionally control the distribution of the increased profit. However, the analysis shows that a manufacturer's maximum profit from a large retailer with given profit from a small retailer is the same as or lower than the maximum profit when optional two-part tariffs based on marginal cost are applied. Therefore, it can be concluded that the optional modified tariffs do not have additional contribution to profit sharing relative to the tariffs based on marginal cost. Although this paper does not cover all kinds of optional tariffs that are different from tariffs based on marginal cost, it shows the advantage of optional tariffs based on marginal cost and has important theoretical implications. The result of this paper also gives guide for channel coordination. Optional two-part tariff based on marginal cost can increase efficiency in channel coordination.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.92-92
• /
• 2022

In preparation for the ever-changing climate and unification of North Korea and South Korea, it is necessary to increase the grain self-sufficiency rate by selecting crops with good utilization in high-altitude regions. The principle is to sow pastures at the end of August. However, sowing occurs in spring because the sowing period is missed when the weather is bad or when the workforce is insufficient. Sometimes when the grassland is completely devastated, it is frequently sowed in spring. In addition, North Korea consists of a high-altitude regions, and has been devastated in a general mountainous region. As a result, the landscape is not good and it is vulnerable to natural disasters such as landslides. Therefore, to prevent this, pasture must be sowed in the high-altitude regions. The goal of this study was to evaluate and compare yield and feed value of pasture species and varieties by spring sowing in high-latitude regions. The study was conducted in Pyeongchang, Gangwon-do, which is 700m height above sea level. The pasture species and varieties was sown on April 24, 2022. Each treatment was carried out by sowing 30 kg/ha, the experiment field size was 1 m²(1m×1m), and randomized block design with tri-repeat. The total of 14 varieties was used in the study, 6 varieties of Orchardgrass (OG), 6 varieties of Tall fescue (TF) and 2 varieties of Perennial ryegrass (PRG). The grassland composition fertilization using (N:P₂O₅:K₂O at 80:200:70 kg/ha) was conducted and management fertilizer was N:P₂O₅:K₂O at 210:150:180 kg/ha. The first harvest was June 26,2022 and the second harvest was on August 16, 2022. For statistical analysis of the data, an Analysis of Variance (ANOVA) was performed using the R3.6.3 software program, and all data was subjected to analysis using Duncan's multiple range test. Significance was set at the 5% level. The dry matter yield at the first harvest was the highest in PRG, and second harvest was the highest in TF (p < 0.05). Overall, PRG showed a trend of gradually decreasing growth, OG and TF showed a trend of gradually improving growth. This showed that PRG was considerably weaker to summer depression than other pasture species. Comparing the total dry matter yield, TF was the highest (4,565.45 kg/ha), but there was no significance difference with PRG (4,487.24 kg/ha) (p < 0.05). In addition, comparing the total TDN (total digestible nutrient) yield, TF was the highest (3147.33 kg/ha), second in PRG (2975.67 kg/ha) and third in OG (2052.33 kg/ha). Since this result is the data of the second harvests, if the result is derived by the end of next year, it will be provided as basic data for selection of pasture species and varieties suitable for spring seeding in high-altitude regions.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.6
• /
• pp.151-171
• /
• 2023

For the efficient establishment of a channel strategy for banks, this study aims to propose a channel model by classifying channels into types, and carrying out a correspondence analysis per type. A survey of bankers was conducted to visualize categorical data and create a positioning map. As a result, first, 12 banking channels were classified into 4 types based on business processing subjects and places, which were then, further grouped into the categories of full-banking and self-banking. Second, a correspondence analysis according to the classified types was carried out, and it was found that the branch-type is suitable for product description and customer management, while the banking-type is suitable for efficient business processing without time and space constraints. Furthermore, the analysis also showed that the machine-type and banking-type are inappropriate for customer management, and the mobility-type demonstrates low operational effectiveness due to a lack of awareness. The aforementioned findings suggest the need for a hybrid convergence channel that reflects the characteristics of banking tasks and fills in the gaps between the different channels. Third, a channel model was derived by adding a common area to the 2×2 model consisting of the business processing subjects and places. Therefore, this study is meaningful in that it examines the diversification of channels and factors in the division of roles by channel type based on customers' banking channel selection factors, and presents basic research findings for future channel strategy establishment and efficient channel operation.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.2
• /
• pp.128-136
• /
• 2009

To obtain pure lines for breeding $F_1$ varieties of spreading surfinia and wave petunia, Petunia ${\times}$ hybrida, 20 lines of surfinia petunia and 28 lines of wave petunia that were considered uniform in growth and flowering characteristics were selected by self-pollination of the fifth($S_5$) or the seventh generation($S_7$). The 20 selected lines of surfinia petunia had the branch number ranged from 6.0 to 11.0 cm, and the internode length ranged from 2.0 to 4.2 cm. Among them, ten lines, including '$Pe99-017^7$' were above 60 cm of plant width, above 300 leaves in a plant. Fourteen lines including '$Pe99-017^7$' were more than 150 in the number of flower. In the petal color, thirteen lines, including '$Pe99-017^7$', were red-purple; three, including '$Pe99-007^7$', were purple; '$Pe04-086^7$' and '$Pe04-159^7$' were violet; and line '$Pe072-1^7$' was white. Eight lines including '$Pe02-205-2^5$' ranged from 4.0 to 5.0 cm of flowers diameter, and seven lines including '$Pe04-086^5$' ranged from 3.0 to 4.0 cm of leaf length, which is relatively low. Germination rate of the lines was more than 50%. In the wave petunia, the branch number of the 28 selected lines ranged from 8.0 to 13.0 cm, and the internode length ranged from 1.0 to 3.2 cm, which is relatively higher than surfinia petunias. Among them, ten lines, including '$Pe99-020^7$' were above 60 cm of plant width, above 200 leaves in a plant. Twelve lines including '$Pe04-034-2^5$' were more than 150 in the number of flower. In the petal color, eighteen lines, including '$Pe99-020^7$', were red-purple; three, including '$Pe04-113-4^5$', were red; three, including '$Pe04-263^5$', were white; '$Pe04-201^5$' and '$Pe04-263^5$' were violet blue; and line '$Pe04-072-5^5$' was purple. Nine lines including '$Pe04-201^5$' ranged from 4.0 to 5.0 cm of flowers diameter, and eleven lines including '$Pe04-263^5$' ranged from 3.0 to 4.0 cm of leaf length, which is relatively low. All the lines with various growth and flowering characteristics would be very promising to use as breeding materials for $F_1$ hybrids of spreading petunia, Petunia ${\times}$ hybrida.

• Journal of Korean Home Economics Education Association
• /
• v.34 no.1
• /
• pp.59-80
• /
• 2022

The purpose of this study was to develop a workbook that can support the class and evaluation of the subject, 「Food safety and health」 and to verify its validity. The development direction of the workbook was set by analyzing the 「Food safety and health」 curriculum, dietary education materials, and previous studies related to the workbook, and the overall structure was designed by deriving the activity ideas for each area. Based on this, the draft was developed, and the draft went through several rounds of cross-review by the authors and the examination and revision by the Ministry of Food and Drug Safety, before the final edited version was developed. The workbook was finalized with corrections and enhancements based on the advice of 9 experts and 44 home economics teachers. The workbook consists of 4 areas: the 'food selection' area, with 10 learning topics and 36 lessons, the 'food poisoning and food management' area, with 10 learning topics and 36 lessons, the 'cooking' area, with 11 learning topics and 43 lessons, and the 'healthy eating' area, with 11 learning topics and 55 lessons, resulting in a total of 42 learning topics, 170 lessons. The workbook was designed to evenly cultivate practical problem-solving competency, self-reliance capacity, creative thinking capacity, and community capacity. In-depth inquiry-learning is conducted on the content, and the context is structured so that self-diagnosis can be made through evaluation. According to the validity test of the workbook, it was evaluated to be very appropriate for encouraging student-participatory classes and evaluations, and to create a class atmosphere that promotes inquiry by strengthening experiments and practices. In the current situation where the high school credit system is implemented and individual students' learning options are emphasized, the results of this study is expected to help expand the scope of home economics-based elective courses and contribute to realizing student-led classrooms with a focus on inquiry.