• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.04a
• /
• pp.35-35
• /
• 2001

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.4
• /
• pp.600-609
• /
• 2001

WSGGM based low-resolution spectral model for calculating radiation transfer in combustion gases is applied to estimate self-absorption of radiation energy in one-dimensional opposed flow flames. Development of such a model is necessary in order to enable detailed chemistry-radiation interaction calculations including self-absorption. Database of band model parameters which can be applied to various one-dimensional opposed flow diffusion and partially premixed flames is created. For the validation of the model and database, low resolution spectral intensities at fuel exit side are calculated and compared with the results of a narrow band model with those based on the Curtis-Godson approximation. Good agreements have been found between them. The resulting radiation model is coupled to the OPPDIF code to calculate the self-absorption of radiant energy and compared with the results of an optically thin calculation and the results of a discrete ordinates method in conjunction with the statistical narrow band model. Significant self-absorption of radiation is found for the flames considered here particularly for the fuel side of the reacting zone. However, the self-absorption does not have significant effects on the flame structure in this case. Even in the case of the low velocity diffusion flame and the partially premixed flame of low equivalence ratio, the effects of self-absorption of radiation on the flame temperature and production of minor species are not significant.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.205-214
• /
• 2005

A development proposal that maximizes the trend of travel souvenir and articles toward tourism and natural resources through utilization of the Limited Production method was the focus of the present research. First, the flaws of travel souvenir and articles, currently produced in Inje, Kangwon-Do, were identified, as were the regional uniqueness of the area. The comparative advantages of developmental conditions of the above-specified region to various other Si/Kun regions were demonstrated to ascertain the optimal production method of travel souvenir and articles. The results are as follows. Superior supply of,7aw materials necessary for production of wood-worked travel souvenir and articles are abundantly available and the dose proximity of 17 existing workshops self-contain the production capacity to sustain the Limited Production method. Furthermore, the regional governing council conveyed positive attitudes towards the prospect of creating a regional production complex of wood-worked travel souvenir and articles. The results demonstrate that the optimal method of maximizing the trend of travel souvenir and articles toward tourism and natural resources is achieved through systematic collaboration of industry, education, and tourism that promote development, production, and merchandising of Inje's regional travel souvenir and articles.

• Electronics and Telecommunications Trends
• /
• v.36 no.1
• /
• pp.54-63
• /
• 2021

Since the recent COVID-19 pandemic, countries have been strengthening trade protection for their security, and the importance of securing strategic materials, such as food, is drawing attention. In addition to the cultural aspects, the global preference for food produced in Korea is increasing because of the Korean Wave. Thus, the Korean food industry can be developed into a high-value-added export food industry. Currently, Korea has a low self-sufficiency rate for foodstuffs apart from rice. Korea also suffers from problems arising from population decline, aging, rapid climate change, and various animal and plant diseases. It is necessary to develop technologies that can overcome the production structures highly dependent on the outside world of food and foster them into export-type system industries. The global agricultural industry-related technologies are actively being modified via data accumulation, e.g., environmental data, production information, and distribution and consumption information in climate and production facilities, and by actively expanding the introduction of the latest information and communication technologies such as big data and artificial intelligence. However, long-term research and investment should precede the field of living organisms. Compared to other industries, it is necessary to overcome poor production and labor environment investment efficiency in the food industry with respect to the production cost, equipment postmanagement, development tailored to the eye level of field workers, and service models suitable for production facilities of various sizes. This paper discusses the flow of domestic and international technologies that form the core issues of the site centered on the 4th Industrial Revolution in the field of agriculture, livestock, and fisheries. It also explains the environmental awareness production technologies centered on sustainable intelligence platforms that link climate change responses, optimization of energy costs, and mass production for unmanned production, distribution, and consumption using the unstructured data obtained based on detection and growth measurement data.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.3
• /
• pp.389-394
• /
• 1993

A study on housing and management of dairy cows was conducted in three villages. All activities of husbandry related to the housing and the condition of the cows were observed and farmers were interviewed using a questionnaire. The main type of housing was a tie stall mostly in the back yard area with a gable or shed type roof. Inside the shed the temperature ranged from 17 to $29^{\circ}C$ and the relative humidity ranged from 62 to 73%. Drainage and manure handling was poor which lead to poor cleanliness of the stables and animal skins. The floor space was mostly wide and the roof level was low (less than 2.5 m). The slope of the floor (1-3%) was sufficient, the roughness of the floor was of medium quality. The shape and size of the feed trough was good with a surface of mostly irregular forms. Concentrate was mixed with water and offered in liquid form in pails made from plastic or from parts of rubber car tires. Hoof length was too long which could lead to unstable position and self injury. It is concluded that the housing conditions of dairy cattle need to be improved in order to improve the condition of the animals and the production performance.

• KSBB Journal
• /
• v.8 no.5
• /
• pp.478-482
• /
• 1993

Perfusion culture was conducted in Celligen perfusion culture system using a self-constructed hybridoma cell and low serum medium. The culture system employed hollow fiber to separate cells from the culture broth. Maximum cell density of $2.1\times10^7$ ce11s/m1, 10 times higher than in batch culture, could be achieved. Concentration of monoclonal antibody (MAb) was 4 times higher and production rate at maximum feed rate was 9 times higher than in batch culture. Glucose concentration was very important for the cell growth and MAb production. When glucose concentration was below 1g/l, i. e. 0.5~0.9g/l, specific MAb production rate decreased but cell concentration still increased. As the glucose concentration goes above 1g/l, specific MAb production rate increased and remained at maximum value at more than 1.5g glucose/l. The maximum value of the specific Mab production rate was similar to that of batch culture.

• Journal of Agricultural Extension & Community Development
• /
• v.7 no.1
• /
• pp.3-12
• /
• 2000

Agricultural extension services in Korea began in 1956, and led self sufficiency of rice through the 'Green Revolution' in 1970's, and a year around supply of green vegetables through the 'White/Vinyl Revolution' in 1980s. The developmental stages of agricultural extension services in Korea, in terms of major purposes, observed by the researcher were as follows; 1) Stage of production guidance when increase in production was directly related to increased income of farmers, 2) Stage of management guidance, when agricultural extension were not only concerned in increasing production, but also in management and marketing, and 3) Stage of improved welfare, when extension services put more emphasis on welfare of farmers in terms of quality of life, as well as increased production, management and marketing. Since late 1980s, farmers in Korea realized the fact that increased production may not lead to increased income. because of this, farmers also wanted improvement of management and marketing. Extension changed the identified needs of farmers to new knowledge, information, and technology in their farm business operation including management and marketing. Loosened cooperations among the central, provincial and local levels after localization of extension services since January 1997 should be strengthened. Provincial level monitoring and supervising should be enhanced for more effective agricultural extension services to meet the changing needs of farmers in the future.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.51-59
• /
• 2001

The Government confirmed the action planning of digital mapping project for major thematic maps based on ‘Revised Plan for The Development of the National Geographic Information System’(NGIS). Mapping for major thematic maps was begun in 1998 when digital mapping project for topographic maps finished due to the delay of the action planning, and will selectively have produced the essential digital thematic maps according to the frequency of usage. The models of topographic-cadastral maps and administrative boundary maps around Suwon were produced in accordance with the presented draft. We presented specification for production of the most appropriate topographic-cadastral maps and administrative boundary maps through the analysis of the process of production, discussion and error check, and correction of the produced topographic-cadastral maps and administrative boundary maps. And we could make it easier to develop digital mapping project of topographic-cadastral maps and administrative boundary maps effectively by presenting the strategy for data input and maintenance, the cost model for carrying out the digital thematic map production, digital topographic maps, and the supplement of data model and data format. Topographic-cadastral maps has a wide range of usage but a lot of difficulties in the process of production and map update under use. So it seems that the study on users, university, private sector and municipal self-government must follow for promoting the use of topographic-cadastral maps.

• Journal of The Korean Association of Information Education
• /
• v.22 no.5
• /
• pp.585-592
• /
• 2018

As the software education which utilizes the virtual reality in the education field becomes more interested in the teachers and the students, researches are being conducted for the education of virtual reality contents production. The purpose of this study is to analyze the curriculum, outcomes, and evaluation results of virtual reality contents production for educational students, elementary school students, and middle school students. As a result of analysis on each group, there was no difference in adaptability to specific tools, differences in ability of object production in production, and self-confidence and interest in production and utilization of virtual reality in learning attitude.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.4
• /
• pp.99-105
• /
• 2014

The domestic airline industry undertakes the production of finished products by assembling existing self-described components via a design process which involves assembly and production steps, after which many of the finished products are exported. However, high reliability and stability must be guaranteed, because customers require high-precision components at the time of manufacturing. In the aircraft parts industry, the mass production of high-value-added parts is limited. Therefore, a small production scale depending on the part is used, as many types of conventional CNC lathe machines with X-axis and Z-axis as well as Z-axis and C-axis CNC milling are used. The parts also rely on high-pressure air to increase production. The most important factors are good stability during processing, as high-precision parts are required, as noted above. It was found that as the C-axis rotation speed increased, the diameter of the cutting tool decreased with a decrease in the surface roughness, while the workpiece rotation speed increased with an increase in the surface roughness.