• Journal of Plant Biology
• /
• 제36권2호
• /
• pp.159-170
• /
• 1993

We investigated the effects of maternal and paternal parentage, and ovule position in a pod on seed development, weight, and progeny performance, using an annual crop commonly called cowpea (Vigna unguiculata L.). The experiment was conducted in a greenhouse. Nine maternal parents were randomly selected, and 3 individuals were chosen as paternal parents based on the male fitness components. Five types of hand-pollination were attempted on each flower of the maternal plants to evaluate the influence of paternal identify. Independent variables such as parentage and ovule position affected the pattern of seed development. Ovules in the middle position of the pod exhibited a much higher probability of seed maturation than those at the stylar and basal positions, confirming the position effect. These independent variables also appeared to exert a significant effect on seed weight, although it was not possible to evaluate the relative importance of those variables due to a significant interaction between parents. Mixed pollination tended to yield heavier seeds than other paternal parents. Ovules in the middle and basal end positions produced heavier seeds than those at the stylar end regardless of maternal and paternal parentage. Seed weight was independent of all measurements of progeny performance. At week 2 after germination significant paternal effects were found to be mediated through the ovule position in a pod. In particular, the progeny derived from self-pollination performed worse than the progeny from other paternal parentage. The progeny performance at week 4 after germination was affected by maternal parents independently of seed weight. These results show that paternal and maternal effects were quite consistent from the seed development to early growth of the progeny. Consequently, maternal and paternal effects on seed development and weight, and progeny performance may reflect, at least to some extent, genetic contribution of both parents. If so, it is possible for sexual selection on maternal and paternal function to generate the evolution of reproductive traits related to seed production.

• 전기전자학회논문지
• /
• 제21권3호
• /
• pp.252-255
• /
• 2017

고온자전합성과 후열처리 공정으로 $Mo_xW_{1-x}Si_2$ 발열체를 제조하였다. $Mo_xW_{1-x}Si_2$ 발열체의 신뢰성을 검증하기 위해 가속수명시험을 수행하였으며, 수명시간을 Minitab 프로그램으로 추정하였다. 또한, 가속수명시험 후의 $Mo_xW_{1-x}Si_2$ 발열체의 고장분석을 전기적과 구조적 특성으로부터 수행하였다. 그 결과, $Mo_xW_{1-x}Si_2$ 발열체의 지배적인 고장 유형은 발열체 내부의 크랙 형성과 $SiO_2$ 보호층의 박리임을 확인하였다.

• 한국환경교육학회지:환경교육
• /
• 제23권2호
• /
• pp.97-112
• /
• 2010

The study aims to comprehend the effect of the wetland ecology education on the elementary school students' changes of recognition about wetland through the wetland ecology map program. In this study, the literary research, the experimental research and the survey methods were operated. Through the literary research, the environmental factors were extracted, and the writing item of ecology map was reconstructed based on the literary research, so the experimental research was operated with the wetland ecology map program. Through four areas of test items such as the information and knowledge, values and attitudes, development and conservation, behavior and participation, and the analysis of children's study results, the effect of the wetland ecology map program on changes of recognition about wetland was verified quantitatively and qualitatively. Wetland ecology map program would be able to be an educational approach which can achieve the 'personalization of environment' setting up predictable environmental improvement goals and satisfying the needs of spatial information of the appropriate regions from the holistic perspective that students themselves plan and participate beyond a one-time experience program. Production of ecological map through continuous monitoring is expected to improve the possibility of subjective environmental actions by operating self-directed learning. Based on the conclusion of this study, we would suggest the following. For wetland ecology map program to be supplemented and utilized, the basic education of wetland should be organized in regular school curriculum, ecology map program including various teaching learning methods be prepared actively, and in future studies, studies of ecosystem-wide wetland ecology map program including animals like birds and fish are necessary.

• 산업경영시스템학회지
• /
• 제36권3호
• /
• pp.109-117
• /
• 2013

This study designed a "Diagnostic Model for Management Innovation of Medium Enterprises" based on the theoretical background of success factor and management diagnosis model for management innovation of medium enterprises and suggested a measure for utilization of strategic subject and diagnostic model that enterprises can apply. Utilization of medium enterprises management innovation diagnostic model designed through this study would be of help for making a diagnosis of the capability maturity level of enterprises' current management system and improving it by establishing a challenging capability objective and building a circulation system capable of innovating enterprises. It is expected for enterprises to overcome growing pains and establish a management system capable of achieving outcome (productivity) by repeating measurement and innovation through management diagnosis. In addition, this study provides a method to produce a strategic subject, select priority of implementation and prepare an implementation road map by classifying and filtering management issues produced as a result of management diagnosis in a systematic way. If variables necessary for production of an objective weighted value of scoring and discover of elements for category of diagnostic model and elementary items as well as design of a self-diagnosis questionnaire, measurement of management outcome suggested in this study can be able to be verified and supplemented through case study in the future, it is expected to make the degree of completion as a diagnostic model elevated that may help for growth and development through innovation of medium enterprises.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.38-43
• /
• 2007

This paper describes ultrasonically assisted grinding used to obtain a glossy surface quickly and precisely. High-quality surfaces are required for plastic injection molding dies used in the production of plastic parts such as dials for cellular phones. Traditionally, in order to finish the dies, manual polishing by a skilled worker has been required after the machining processes, such as electro discharge machining (EDM), which leaves an affected layer, and milling, which leaves tooling marks. However, manual polishing causes detrimental geometrical deviations of the die and consumes several days to finish a die surface. Therefore, a machining process for finishing dies without manual polishing to improve the surface roughness and form accuracy would be extremely valuable. In this study, a 3D positioning machine equipped with an ultrasonic spindle was used to conduct grinding experiments. An electroplated diamond tool was used for these experiments. Generally, diamond tools cannot grind steel because of excessive wear as a result of carbon atoms diffusing into bulk steel and chips. However, ultrasonically assisted grinding can achieve a fine surface (roughness Rz of $0.4{\mu}m$) on die steel without severe tool wear. The final aim of this study is to realize mirror surface grinding for injection molding dies without manual polishing. To do this, it is necessary to fabricate an electroplated diamond tool with high form accuracy and low run-out. This paper describes a tool-making method for high precision grinding and the grinding performance of a self-electroplated tool. The ground surface textures, tool performance and tool life were investigated A ground surface roughness Rz of 0.14 um was achieved Our results show that the spindle speed, feed rate and cross feed affected the surface texture. One tool could finish $5000mm^2$ of die steel surface without any deterioration of the ground surface roughness.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권2호
• /
• pp.162-165
• /
• 2005

A series of fluorine and hydroxyl containing jasmonate derivatives, which were chemically synthesized in our institute, were investigated for their effects on the biosynthesis and heterogeneity of ginsenosides in suspension cultures of Panax notoginseng cells. Com-pared to the control (without addition of elicitors), $100{\mu}M$ of each of the jasmonate was added on day 4 to the suspension cultures of P. notoginseng cells. It was observed that, jasmonates greatly enhanced the ginsenoside content and the ratio of Rb group to Rg group (i.e. $(Rb_1\;+\;Rd)/(Rg_1\;+\;Re)$ in the P. notoginseng cells. Some of the synthetic jasmonates, such as pentafluoropropyl jasmonate (PFPJA), 2-hydroxyethyl jasmonate (HEJA) and 2-hydroxye-thoxyethyl jasmonate (HEEJA), could promote the ginsenoside content to $2.55\;\pm\;0.11,\;3.65\;\pm\;0.13\;and\;2.94\;\pm\;0.06$mg/100 mg DW, respectively, compared to that of $0.64\;\pm\;0.06$mg/100 mg DW for the control and $2.17\;\pm\;0.04$ mg/100 mg DW by the commercially available methyl jasmonate (MJA); and they could change the respective Rb:Rg ratio to $1.60\;\pm\;0.04,\;1.87\;\pm\;0.01\;and\;1.56\;\pm\;0.05$, compared to that of $0.47\;\pm\;0.01$ for the control and $1.42\;\pm\;0.06$ by MJA. The results suggest that suitable esterification of MJA with fluorine or hydroxyl group could in-crease the elicitation activity to induce plant secondary metabolism. The information obtained from this study is useful for hyper-production of heterogeneous products by plant cell cultures.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.136-142
• /
• 2003

This study is planned to investigate the attitude toward the safety and health management of contractor company. Under the contract based production system, all of activities including safety and health management in the contractor company are depended upon the contract. How to make contract influence the worker's health of contractor company. Worker's health of contractor company can be protected by efforts of company of contract-out and contractor company, especially their safety managers. The modelling of the effective safety and health management system for contractor company should consider the need of safety manager of each company and employer of contractor company. Data is collected from safety managers of 3 contract out compaines as electronic and electrical manufacturing industry and 55 safety manager, 57 employers of their contractor compaines using self administered survey with structured questionnaire. The most of all respondents want to support from the contract out compaines. The most important items supported from contract out company is the information based on the safety information network between each company. Safety manager and employer of contactor company also itemized safety education and training in the supporting system from contract out company. These results can be generalized to survey on the other industries.

• Journal of Crop Science and Biotechnology
• /
• 제10권2호
• /
• pp.112-116
• /
• 2007

Kinetin(KN) is an inducer of rice(Oryza sativa L.) defense/stress responses, as evidenced by the induction of inducible secondary metabolite and defense/stress protein markers in leaf. We show a novel light-dependent effect of KN-triggered defense stress responses in rice leaf. Leaf segments treated with KN(100 ${\mu}M$) show hypersensitive-like necrotic lesion formation only under continuous light illumination. Potent accumulation of two phytoalexins, sakuranetin and momilactone A(MoA) by KN that peaks at 48 h after treatment under continuous light is completely suppressed by incubation under continuous dark. Using two-dimensional gel electrophoresis we identified KN-induced changes in ribulose-1, 5-bisphosphate carboxylase/oxygenase, energy- and pathogenesis-related proteins(OsPR class 5 and 10 members) by N-terminal amino acid sequencing and mass spectrometry. These changes were light-inducible and could not be observed in the dark(and control). Present results provide a new dimension(light modulation/regulation) to our finding that KN has a potential role in the rice plant self-defense mechanism.

• Industrial Engineering and Management Systems
• /
• 제4권1호
• /
• pp.54-67
• /
• 2005

This paper provides an evaluation of an optimization-based, multiple-input double-output (MIDO) run-to-run (R2R) control scheme for general semiconductor manufacturing processes. The controller in this research, termed adaptive dual response optimizing controller (ADROC), can serve as a process optimizer as well as a recipe regulator between consecutive runs of wafer fabrication. In evaluation, it is assumed that the equipment model could be appropriately described by a pair of second-order polynomial functions in terms of a set of controllable variables. Of practical relevance is to consider a drifting effect in the equipment model since in common semiconductor practice the process tends to drift due to machine aging and tool wearing. We select a typical application of R2R control to chemical mechanical planarization (CMP) in semiconductor manufacturing in this evaluation, and there are five different CMP process scenarios demonstrated, including mean shift, variance increase, and IMA disturbances. For the controller, ADROC, an on-line estimation technique is implemented in a self-tuning (ST) control manner for the adaptation purpose. Subsequently, an ad hoc global optimization algorithm based on the dual response approach, arising from the response surface methodology (RSM) literature, is used to seek the optimum recipe within the acceptability region for the execution of next run. The main components of ADROC are described and its control performance is assessed. It reveals from the evaluation that ADROC can provide excellent control actions for the MIDO R2R situations even though the process exhibits complicated, nonlinear interaction effects between control variables, and the drifting disturbances.

• 조명전기설비학회논문지
• /
• 제22권5호
• /
• pp.31-40
• /
• 2008

최근 FPD 산업에서 물류이송장비의 전원장치로 비접촉 전원장치에 관한 연구가 활발히 진행되고 있다. 양산 라인에 적용되고 있는 물류장비의 비접촉 전원장치는 주로 직선구간을 왕복하고, 이송대차가 한 대인 경우에 적용하고 있다. 그러나 곡선 구간과 이송대차가 다수인 경우의 물류이송장비에는 적합하지 않다. 따라서 본 논문은 직 곡선 구간이 혼용되어진 구조이고, 이송대차가 한 대 이상으로 구동되는 물류이송장비의 비접촉 전원장치 시작품에 적용하였고, 적용된 비접촉 전원장치의 회로 구조는 풀 브릿지 구조를 갖는 직 병렬 공진 DC/DC 컨버터 회로로 하여 회로해석, 제어방법, 특성평가, 실험을 통한 적용 가능성에 대한 연구를 행하였다. 또한 비접촉 전원장치의 전체 제어는 1차측 전원공급장치에 일정한 공진전류를 제어하기 위해 듀티 제어를 사용하였고, 2차측 전원공급장치의 출력전압을 일정하게 유지하기 위해 다수의 이송대차가 자체 제어를 하도록 구성하였다. 실제 2대의 이송대차를 제작하여 직 곡선 구간을 구성하고, 물류이송장비를 운용하여 양호한 특성으로 적용 가능함을 알 수 있었다.