• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.53-56
• /
• 2018

In this paper, a CMOS bandgap voltage reference that is not sensitive to changes in the external environment is presented. Large OLED display panels need high supply voltage. MOSFET devices with high voltage are sensitive to the output voltage due to the channel length modulation effect. The self-cascode circuit was applied to the bandgap reference circuit. Simulation results show that the maximum output voltage change of the basic circuit is 77mV when the supply voltage is changed from 10.5V to 13.5V, but the proposed circuit change is improved to 0.0422mV. The improved circuit has a low temperature coefficient of $9.1ppm/^{\circ}C$ when changing the temperature from $-40^{\circ}C$ to $140^{\circ}C$. Therefore, the proposed circuit can be used as a reference voltage source for circuits that require a high supply voltage.

• Journal of Drive and Control
• /
• v.18 no.1
• /
• pp.31-38
• /
• 2021

This study presents a new principle for driving the robot aimed at reducing the position error for the boresonic examination of turbine rotor. The conventional method of inspection is performed by installing manipulator onto the flange of the turbine rotor and connecting a pipe, which is then being pushed into the bore. The longer the pipe gets, the greater sagging and distortion appear, making it difficult for the ultrasonic sensor to contact with the internal surface of the bore. A pneumatic pressure will ensure the front or rear feet of the robot in close contact with the inner wall to prevent slipping, while the ball screw on the body of the robot will rotate to drive it in the axial direction. The compression force required for tight contact was calculated in the form of a three-point support, and a static structural simulation analysis was performed by designing and modeling the robot mechanism. The driving performance and ultrasonic detection ability have been tested by fabricating the robot, the test piece for ultrasonic calibration and the transparent mock-up for robot demonstration. The tests have confirmed that no slipping occurs at a certain pneumatic pressure or over.

• The Journal of Korea Robotics Society
• /
• v.18 no.3
• /
• pp.346-351
• /
• 2023

With the release of numerous open driving datasets, the demand for domain adaptation in perception tasks has increased, particularly when transferring knowledge from rich datasets to novel domains. However, it is difficult to solve the change 1) in the sensor domain caused by heterogeneous LiDAR sensors and 2) in the environmental domain caused by different environmental factors. We overcome domain differences in the semi-supervised setting with 3-stage model parameter training. First, we pre-train the model with the source dataset with object scaling based on statistics of the object size. Then we fine-tine the partially frozen model weights with copy-and-paste augmentation. The 3D points in the box labels are copied from one scene and pasted to the other scenes. Finally, we use the knowledge distillation method to update the student network with a moving average from the teacher network along with a self-training method with pseudo labels. Test-Time Augmentation with varying z values is employed to predict the final results. Our method achieved 3rd place in ECCV 2022 workshop on the 3D Perception for Autonomous Driving challenge.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.01a
• /
• pp.323-324
• /
• 2022

본 논문에서는 사람의 개입 없이 실내 환경에서 마스크 미 착용자를 스스로 발견한 후 방역수칙위반 사실에 대한 경고와 함께 마스크 착용을 권고하는 인공지능 기반의 자율주행 서비스 로봇을 개발한다. 제안한 시스템에서 로봇은 동시적 위치 추적 지도 작성 기법인 SLAM(Simultaneous Localization and Mapping)기술을 이용하여 지도를 작성한 후 사용자가 제공한 웨이포인트(Waypoint)를 기반으로 자율주행한다. 또한, YOLO(You Only Look Once) 알고리즘을 이용한 실시간 객체 인식 기술을 활용하여 보행자의 마스크 착용 여부를 판단한다. 실험을 통해 사전에 작성된 지도에 지정된 웨이포인트를 따라 로봇이 자율주행하는 것을 확인하였다. 또한, 충전소로 이동할 경우, 영상 처리 기법을 활용하여 충전소에 부착된 표식에 근접하도록 이동하여 충전이 진행됨을 확인하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.202-217
• /
• 2021

Following the fatal accident of pedestrians caused by Autonomous Vehicle by Uber, the world's largest ride-hailing company, two people were killed in a self-driving car accident by Tesla in April. There is a need to ensure the safety of road users. Accordingly, in order to secure the safety of Autonomous Vehicle driving, it is necessary to evaluate Autonomous Vehicle driving technologies in various situations based on the road and traffic environment in which the Autonomous vehicle will actually drive. Therefore, this study used UC-win/Road ver.14.0 based on general driver's license test questions to present a virtual reality-based Autonomous Vehicles driving ability evaluation tool among various driving ability test method. Based on this, it was intended to test driving ability for unexpected situations in complex and diverse driving environments, and to confirm its practical applicability as an optimal tool for Autonomous vehicle ability test and evaluation.

• 한국노년학
• /
• v.38 no.3
• /
• pp.593-605
• /
• 2018

This study examines factors that influence older drivers to consider stopping driving in advance and whose advice plays an important role in the driving cessation decision. Data came from a nationally representative cross-sectional survey of community-dwelling older adults (N=2,076). About two thirds reported that they have considered stopping driving (62.8%) and they preferred to decide by themselves (66.0%). Logistic regression results showed that women and residents in urban areas were twice as likely to consider voluntary driving cessation compared to their counterparts. Each one year increase in age contributed to the probability that respondents would consider driving cessation by five percent. Those with greater difficulties in ADLs due to chronic illnesses were also more likely to consider driving cessation. No sociodemographic and health factors were related to whether older drivers preferred to decide by themselves or listen to others. These results imply that policies to promote self-motivation to stop driving among older drivers would be effective. Furthermore, they suggest it could be important to help older drivers plan their driving cessation in advance while still at a young-old age, and that more attention needs to be paid to men and those living in rural areas among older drivers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2153-2159
• /
• 2013

In order to drive a vehicle safely, driver needs to check status of the car. Many moderns are having trouble to spare time to visit auto mechanic and have car mechanics to check their car other than their office hours. If the car status cannot be inspected regularly, it is likely to cause a big accident threatening the surroundings as well as driver's life. Inspection tool and system help driver to check their own vehicle status personally are required for preventing it. In this paper, it designed and realized system that records driving information based on changing data of vehicle (location and automotive internal data) and allows driver can check the vehicle status easily and further, driver can share the driving information with repair shop via the Internet to receive detailed inspection service for car status.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.81-86
• /
• 2020

With the development of the intelligent Internet of Things AIoT that goes beyond the IoT of the Internet of Things, the industry is changing overall. In addition, with the advent of the 4th Industrial Revolution, revolutionary changes and developments are also taking place in the automobile industry. A representative example is "autonomous driving vehicle". Because the domestic and foreign interests in autonomous vehicles have increased, many developments have been made, and although limited, they have developed into the commercialization stage. However, the structure of the autonomous vehicle that collects, analyzes, and controls data using various sensors installed in the vehicle, not the driver, is often insufficiently exposed to hacking due to the lack of multiplexed devices for security. In this case, as this can be a threat not only to the driver, but also to the surrounding environment, this paper proposes a new data processing function to improve the system security of autonomous vehicles.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.589-590
• /
• 2013

The fast development of electronic devices towards wireless, portable and multi-functionality desperately needs the self-powered and low maintenance power sources. The possibility to coupling the nanogenerator to wearable and portable electronic device facilitates the self powered device with independent and self sustained power source. Nanogenerator has ability to convert the low frequency mechanical vibration to electrical energy which is utilized to drive the electronic device [1]. The self powered power source has the ability to generate the power from environment and human activity has attracted much interest because of place and time independent. The human body motion based energy harvesting has created huge impact for future self powered electronics device applications. The power generated from the human body motion is enough to operate the future electronic devices. The energy harvesting from human body motion based on triboelectric effect has simple, cost-effective method [2, 3] and meet the required power density of devices. However, its output is still insufficient to driving electronic devices in continues manner so new technology and new device architecture required to meet required power. In the present work, we have fabricated the triboelectric nanogenerator using PDMS polymer. We have studied detail about the power output of the device with respect to different polymer thickness and varied separation distance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.68-75
• /
• 1998

The Intelligent Cruise Control system, ICC, is a driver assisting system for controlling relative speed and distance between two vehicles in the same lane. The ICC may be considered as an extension of a traditional cruise control, not only keeping a fixed speed of the vehicle, but correcting the speed also to that of a slower one ahead. This paper presents a real-time self-tuning fuzzy control algorithm to develop ICC. The self-tuning fuzzy control law is adopted to reduce the effects of nonlinearities of the vehicle and various road environments. In the self-tuning algorithm an interior penalty method is applied to preserve the inherent order of membership functions and is modified as an on-line algorithm for real time application. Via simulations, the performance of the suggested control algorithm is compared with a PID and a fuzzy control without self-tuning. The suggested control algorithm is implemented on PRV III and the results of the test driving on a local road are given.