• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.2
• /
• pp.51-57
• /
• 2009

Ubiquitous sensor network is the communication environment where sensor nodes move freely and construct network to get the services from the system. So, it does not need fixed infrastructure and can easily be placed in unaccessible regions like war or calamity area. Wireless sensor network protocol has self-organizing capability, need to adapt topology change flexibly and also has technique that sensor nodes work cooperatively, because network disconnection is frequently occurred due to the active mobility of sensor nodes. In this paper, we design a cluster based fault-tolerant routing protocol for the efficient topology construction and to guarantee stable data transmission in USN. The performance of the proposed protocol is evaluated by an analytic model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.733-736
• /
• 2009

Power Line Communication(PLC) is need not additional communication line. So establishment expense is inexpensive and application is simple. Therefore, lower part network of various application field is possible. However, there are high subordinate interference and noise problem on limited transmission data and communication interference element. Wireless Sensor Network(WSN) is need not infrastructure, Self-regulating network architecture of sensor nodes is possible. So at short time, network construction is available. But, power consumption is increased by active sensing for QoS elevation and unnecessary information transmission, low electric power design and necessity of improve protocol are refered to life shortening problem and is studied. In this paper, supplement problem of power line communication and wireless sensor network mutually and because advantage becomes linkage integration control system using synergy effect of two technologies as more restriction be and tries to approach structurally control network that is improved for smooth network environment construction. Honeywell's hybrid sensor network does comparative analysis(benchmarking). Confirm performance elevation proposing teaming of power line communication and wireless sensor network. Through simulation, service delay decreases and confirms that performance elevation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.8
• /
• pp.1695-1703
• /
• 2011

According to increase of the number of electronic devices for user comfort and safety, electronic systems are being constructed by using network to effectively control the devices. In this paper, we design and implement the MOST network diagnostic system by using wireless LAN to diagnose MOST network and the devices connected by the network and to effectively manage them. MOST, which is a vehicle multimedia network standard for the next generation, is being used for construction of car infotainment systems, and enables to develop various devices which are required for them. The wireless diagnostic system implemented in this paper enables to self-diagnose MOST network and also to check errors by diagnosing status of MOST electronic devices. We also can check and manage status of a in-vehicle MOST network system using mobile devices based on wireless LAN.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1137-1140
• /
• 2005

Automatic welding has been used frequently on pipeline projects. The productivity and reliability are most essential features of the automatic welding system. The mechanized GMAW process is the most widely used welding process and the carriage and band system is most effective welding system for pipeline laying. This application-oriented paper introduces new automatic welding equipment for pipeline construction. It is based on cutting-edge design and practical welding physics to minimize downtime. This paper also describes the control system which was designed and implemented for new automatic welding equipment. The system has the self diagnostic function which facilitates maintenance and repairs, and also has the network function via which the welding task data can be transmitted and the welding process data can be monitored. The laser vision sensor was designed for narrow welding groove in order to implement higher accuracy of seam tracking and fully automatic operation.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.8
• /
• pp.551-560
• /
• 2004

In this paper, we propose a new architecture of Self-Organizing Fuzzy Polynomial Neural Networks (SOFPNN) that is based on a genetically optimized multilayer perceptron with fuzzy polynomial neurons (FPNs) and discuss its comprehensive design methodology involving mechanisms of genetic optimization, especially genetic algorithms (GAs). The proposed SOFPNN gives rise to a structurally optimized structure and comes with a substantial level of flexibility in comparison to the one we encounter in conventional SOFPNNs. The design procedure applied in the construction of each layer of a SOFPNN deals with its structural optimization involving the selection of preferred nodes (or FPNs) with specific local characteristics (such as the number of input variables, the order of the polynomial of the consequent part of fuzzy rules, and a collection of the specific subset of input variables) and addresses specific aspects of parametric optimization. Through the consecutive process of such structural and parametric optimization, an optimized and flexible fuzzy neural network is generated in a dynamic fashion. To evaluate the performance of the genetically optimized SOFPNN, the model is experimented with using two time series data(gas furnace and chaotic time series), A comparative analysis reveals that the proposed SOFPNN exhibits higher accuracy and superb predictive capability in comparison to some previous models available in the literatures.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.498-503
• /
• 1994

The paper demonstrates that holon networks can be used effectively for identification of nonlinear dynamical systems. The emphasis of the paper is on modeling of complicated systems which have a great deal of uncertainty and unknown interactions between their elements and parameters. The concept of applying a quantitative model building, for example, to environmental or ecological systems is not new. In a previous paper we presented a holon network model as an another alternative to quantitative modeling. Holon networks have a hierarchical construction where each level of hierarchy consists of networks with reciprocal actions among their elements. The networks are able to evolve by self-organizing their structure and adapt their parameters to environments. This was achieved by an autonomous decentralized adaptation algorithm. In this paper we propose a new emergent evolution algorithm. In this algorithm the initial holon networks consists of only a few elements and it grows gradually with each new observation in order to fit their function to the environment. Some examples show that this algorithm can lead to a network structure which has sufficient flexibility and adapts well to the environment.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.316-321
• /
• 2007

The casualties due to slope failures such as landslide, rock fall, debris flow etc. are about 24% in total casualties caused by natural disasters for the last 10 years. And these slope failures are focused in the season in which typhoon and torrential rain take place. Not much attention, however, have been put into landslide mitigation research. Meanwhile, USN(Ubiquitous Sensor Network) forms the self-organization network, and transfers the information among sensor nodes that have computing technology ability. Accordingly, USN is embossed a social point technology. The objective of this paper is to develop a prototype system for slope failure monitoring using USN technology. For this we develop module that collects and change slope movement data measured by two tiltermeter and a tension wire, store transferred data in database. Also we develop application program that can easily analyze the data. We apply the prototype system to a test site at KICT for testing and analyzing the system's performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.15-30
• /
• 2000

The important considerations in the design of fiber-optic networks are reliability and survivability preparing against a failure. The SDH(Synchronous Digital Hierarchy), the international standard of optical transmission, offers several network reconfiguration methods that enable network to be automatically restored from failure. One of the methods is the SHR(Self Healing Ring), which is a ring topology system. Most network providers have constructed their backbone networks with SHR architecture since it can provide survivability economically. The network architecture has eventually evolved into a multi-ring network comprised of interconnected rings. This paper addresses multi-ring network design problems is to minimize ring-construction cost. This problem can be formulated with MIP(mixed integer programming) model. However, it is difficult to solve the model within reasonable computing time on a large scale network because the model is NP-complete. Furthermore, in practice we should consider the problem of routing demands on rings to minimize total cost. This routing problem involves multiplex bundling at the intermediate nodes. A family of heuristic algorithms is presented for this problem. These algorithms include gateway selection and routing of inter-ring demands as well as load balancing on single rings. The developed heuristic algorithms are applied to some network provider's regional and long-distance transmission networks. We show an example of ring design and compare it with another ring topology design. Finally, we analysis the effect bundling.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.11
• /
• pp.6631-6636
• /
• 2013

Through years of effort, researchers have made notable progress in gene and microRNA fields about retinoblastoma morbidity. However, experimentally validated data for genes, microRNAs (miRNAs) and transcription factors (TFs) can only be found in a scattered form, which makes it difficult to conclude the relationship between genes and retinoblastoma systematically. In this study, we regarded genes, miRNAs and TFs as elements in the regulatory network and focused on the relationship between pairs of examples. In this way, we paid attention to all the elements macroscopically, instead of only researching one or several. To show regulatory relationships over genes, miRNAs and TFs clearly, we constructed 3 regulatory networks hierarchically, including a differentially expressed network, a related network and a global network, for analysis of similarities and comparison of differences. After construction of the three networks, important pathways were highlighted. We constructed an upstream and downstream element table of differentially expressed genes and miRNAs, in which we found self-adaption relations and circle-regulation. Our study systematically assessed factors in the pathogenesis of retinoblastoma and provided theoretical foundations for gene therapy researchers. In future studies, especial attention should be paid to the highlighted genes and miRNAs.

• IE interfaces
• /
• v.13 no.4
• /
• pp.658-667
• /
• 2000

Seasonal variation of natural gas demand coupled with rigid and stable import pattern of gas represents the characteristic feature of the Korean Liquified Natural Gas(LNG) industry. This attribute has required a huge amount of investment for the construction of storage facility. Thus, to minimize the supply cost, it is legitimate to reduce storage requirement itself. In this study, we combine three alternative methods to deal with the storage requirement to minimize the supply cost. Those are (1) adding additional storage tanks, (2) inducing large firm customers, and (3) constructing gas-turbine self generation facilities. Methodologically, we employ the mixed integer program (MIP) to optimize the system. The model also consider demand and price-setting scheme in separate modules. From the results, it is shown that if alternatives are combined optimally, a number of storage tanks can be reduced substantially compared with the original capacity plan set by the industry authorities. We perform various sensitivity analyses to check the robustness of the results. The methodology presented in this study can be applied to the other physical network industry, such as hydraulics. The empirical results will shed some light on the rationalization of capacity planning of the Korean natural gas industry.