• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.21-27
• /
• 2020

Recently, LCD (Liquid Crystal Display) has been replaced by OLDE (Organic Light Emitting Diode) in high resolution display industry. In the process of OLDE production, it inspects defective products by sending a signal using a probe during OLED panel inspection. At this time, the cause of the detection of failure is divided into two. One is the self-defect of the OLED panel and the other is the poor contact occurring in the process of contact between the two. The second case is unknown at the time of testing, which increases the time for retesting. To this end, we made a system that can identify in real time whether the probe is in contact during the inspection. A contact probe unit was designed for the system, and a stage system was implemented. An inspection system was constructed through S / W and circuit configuration for actual inspection. Finally, a system that can check contact and non-contact in real time was constructed.

• The Journal of the Korea Contents Association
• /
• v.21 no.5
• /
• pp.465-476
• /
• 2021

This study considers both causal and control factors for explaining both contact and distribution of sexually explicit material and tests their interaction effects for examining buffering effects of control factors in causal process. This study examines the effect of low self-control, differential association with peers and patriarchy family environmental factor as causal factors. It also considers three control factors such as morality. legal punishment, and lack of opportunity and test interaction effect between causal and control factors in both contact and distribution cases. Using data from college students in Seoul, results show that the effects of all causal factors are significant in both contact and distribution of sexually explicit material and the effect of differential association is the most significant. However, their interaction effects between causal and control factors are different across contact and distribution cases. In the contact case, all interaction effects are not significant. It means that causal factors have independent effects and control factors have no buffering effects. However, in the distribution case, the interaction effects between low self-control and morality, between differential association and morality, between patriarchy family and punishment, and between patriarchy family and lack of opportunity are significant. Empirical implications are discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.227-227
• /
• 2009

To prevent such accidents, molded case circuit breakers with improved short-circuit current interrupting capacity are needed. This paper is focused on understanding the interrupting capability with respect to double contact structure and puffer assisted self quenching that are based on the shape of the contact system in the current molded case circuit breaker. The new arc quenching structure for increasing the interrupting capacity of molded case circuit breakers is investigated by simulation and experiment.

• Journal of Oral Medicine and Pain
• /
• v.10 no.1
• /
• pp.33-39
• /
• 1985

Changes of occlusal contacts after E.M.G. biofeedback therapy with D.D.S. (Self control system, EMG 220, Sandiago California) was investigated in 20 SNUH students and residents with normal occlusion. Treatment time was 30 minutes on every subject. Occlusal contacts of before biofeedback therapy were taken at 4: 00 P.M. and that of after biofeedback therapy were taken at 4:40 P.M. Author compared the occlusal contacts before biofeedback therapy with that of after biofeedback therapy. The obtained results were as follow : 1. The number of occlusal contacts was 23.9, before biofeedback therapy and, 26.3, after biofeedback therapy. 2. The percentage of accentuated contact to diffuse contact was 78.5%, before treatment and 38.8% after treatment. 3. 6 heaviest contacts were changed 4.3 teeth per one subject after biofeedback therapy.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.474-479
• /
• 1993

Submicron contact hole filling with aluminum alloys has been achieved with a multistep metallization method, which utilizes a metal " flow" or self-diffusion process at elevated temperatures after the metal was sputter-deposited. A multi-chamber, modular sputtering system was employed to deposit aluminum alloys and subsequently to anneal the deposited metal films under vacuum at high temperatures. The film were deposited on 200 mm wafers with planar, dc magnetron sputtering sources without anysubstrate bias. The basic process steps studied for the multistep metallization include an initial layer deposition at low temperatures less than $100^{\circ}C$, and an annealin gstep at elevated temperatures, between 450 and $550^{\circ}C$. The degree of planarization or step coverage was dependent strongly upon the temperature and time of the flow step and complete filling of the submicron contacts with aluminum alloys was achieved. Responsible mechanisms for the enhancement in step coverge and factros determining uniform and reproducible flow of aluminum alloys during the high temperauture step are discussed.discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.2
• /
• pp.143-147
• /
• 2008

Super-hydrophobic surfaces showed that contact angle of water was higher than 140 degrees. That surface could be made several methods such as Carbon nano tubes grown vertically, PDMS asperities arrays, hydrophobic fractal surfaces, and self assembled monolayers coated by CVD and so on. However, we fabricated super-hydrophobic surfaces with plasma treatments which were very cost efficient processes. Their surfaces were characterized by static contact angles, advancing, receding, and stability against UV irradiation. Optimal surfaces showed static contact angles were higher than 150 degrees. Super-hydrophobic property was remained after UV irradiation for one week.

• Journal of the Korean Society of School Health
• /
• v.20 no.2
• /
• pp.59-68
• /
• 2007

Purpose: The purpose of this study was to investigate the difference of sexual behaviors of college students according to internet pornography contact. Methods: Subjects consisted of 472 students of K college located in chungcheongbuk-do. The data were collected through a self-administered questionnaire from May, 21 to May, 31, 2007. Results: Eighty-seven percent (87.3%) of respondents contacted internet pornography. As for the first time they contacted it, forty-eight percent(48.3%) contacted it when they were middle school students. Forty-three percent(43.6%) contacted it one time per several months and twenty-one percent(21.2%) contacted it within 10 minutes. Sexual behaviors(hand grasping, hugging, kiss, masterbation, coitus, pregnancy, love expression in public place) showed significant differences according to Internet pornography contact experience, period, frequency, and time. Conclusion: College administration should investigate sexual behavior patterns according intemet pornography contact and provide all college students regular sexual health promotion program.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.8
• /
• pp.863-869
• /
• 2006

A new CVT, the inner spherical traction CVT (ISCVT) is introduced. Transmission of the most scooters is the self-controlled variable pulley-belt type of CVT having some disadvantages in the fuel consumption and the limitation of the transmittable power due to the slippage between the belt and pulley. Unlike this, ISCVT controlled directly by driver is more efficient and the contact mechanism having the same line of contact normal of the spherical rotors of different radii on common center causes that the power density and torque capacity are remarkably improved. The prototype with the specifications of 50cc scooter is designed and tested.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.95-101
• /
• 2012

An internal type roller ring gear(RRG) system composed of either a pin or a roller ring gear and its conjugated cam pinion can improve the gear endurance from that of a conventional gear system by reducing the sliding contact, while increasing the rolling motion. In this paper, we first proposed the exact cam gear profile and the self-intersection conditions obtained when the profile shift coefficient is introduced. Then, we investigated contact stresses and surface pitting life to fmd characteristics for surface fatigue by varying the shape design parameters. The results show that the pitting life can be extended significantly by increasing the profile shift coefficient.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.1
• /
• pp.145-151
• /
• 2004

This paper proposes the calculation method of magnetic coupling coefficient of contact-less power supply by the 3D finite element method with a variation of the secondary core position. The primary, secondary self and leakage inductances and the capacitances of a resonant circuit are calculated by the finite element analysis results. The magnetic coupling coefficients are obtained also. The power factors are obtained by simulation for the magnetic coupling coefficients and compared.