• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
• /
• pp.80-84
• /
• 1996

A Switched Reluctance Motor(SRM) has a torque pulsating inherently due to characteristics of pulse driving. A torque pulsating causes noise and sound vibration. To reduce a noise, a torque pulsating shall be controlled. Many efforts to make flat-topped current has been proposed to minimize a torque pulsating up to now. This paper proposed a control scheme to minimize the vibration of SRM by controlling the vibration directly by using of self-turning technique. The experimental results show that the proposed control scheme is effective in reducing the torque ripple and noise.

• ETRI Journal
• /
• 제28권3호
• /
• pp.355-363
• /
• 2006

This paper presents a low-cost RF parameter estimation technique using a new RF built-in self-test (BIST) circuit and efficient DC measurement for 4.5 to 5.5 GHz low noise amplifiers (LNAs). The BIST circuit measures gain, noise figure, input impedance, and input return loss for an LNA. The BIST circuit is designed using $0.18\;{\mu}m$ SiGe technology. The test technique utilizes input impedance matching and output DC voltage measurements. The technique is simple and inexpensive.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.435-438
• /
• 2002

A design of Ku-band(11.7~12.20Hz) monolithic microwave integrated circuit(MMIC) low noise block(LNB) downconverter using self oscillating mixer (SOM) for direct broadcast satellite(DBS) application is presented The proposed LNB downconverter is composed of low noise amplifier(LNA), image reject filter(IRF), SOM , low pass filter(LPF). The conversion gain is 30dB , VSn is less than 1.7: 1 and overall noise figure is less than 1.2dB.

• 한국소음진동공학회논문집
• /
• 제11권8호
• /
• pp.338-348
• /
• 2001

A hybrid self-hearing motor, which Is a functional combination of general permanent magnet (PM) motor and hybrid active magnetic bearing(AMB), was proposed a few years ago. In this paper the hybrid self-bearing motor is modified to a disk type, in which one of two magnetic hearings was substituted for a thin yoke to make the system more compact. An outer rotors in this self-hearing motor is actively controlled only in two radial directions while the ocher motions are passively salable owing to the disk-type structure. Main advantages of the proposed self-hearing motor are simple control mechanism, low power consumption and smart structure. Mathematical model for the magnetic force Is built wish consideration of the radial displacement of the rotor. The model helps us not only to design a levitation controller but also to expect the system performance. Some experimental results show good capability and feasibility of the Proposed self-bearing motor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.366-372
• /
• 2007

Self-sensing measurement of piezo inkjet and its application are discussed. The pressure wave inside the inkjet dispenser was measured by current measurement due to self-sensing capability of PZT. The pressure wave measured from current was verified by commercially available laser vibrometer. Here, two applications using self-sensing signal were discussed: waveform design for high speed jetting and condition monitoring. For waveform design, two pulse waveform was designed based on self-sensing signal such that the pressure wave after droplet formation can be minimized. For condition monitoring, self-sensing signal was shown to be effective in detecting air bubble trapped in inkjet printhead.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.27-33
• /
• 2004

The Noise generation mechanisms of propane laminar premixed flames on a slot burner have been studied experimentally. The sound levels and frequencies were measured for various mixture flow rates (velocities) and equivalence ratios. The primary frequency of self-induced noise increases with the mean velocity of mixture as $f{\;}{\propto}{\;}U_f^{1.144}$ and the measured noise level increases with the mixture flow rate and equivalence ratio as $p{\;}{\propto}{\;}U_f^{1.7}$$F^{8.2}$. The nature of flame oscillation and the noise generation mechanisms are also investigated using a high speed CCD camera and a DSRL camera. The repetition of sudden extinction at the tip of flame is evident and the repetition rates are identical to the primary frequencies obtained from the FFT analysis of sound pressure signals. CH chemiluminescence intensities of the oscillating flames were also measured by PMT with a 431 nm(10 FWHM) band pass filter and compared to the pressure signals.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.382.1-382
• /
• 2002

This paper presents a new approach integrated Case-Based Reasoning with Self- Organization Map(SOM) in diagnosis systems. The causes of faults are obtained by case-base trained from SOM. When the vibration problem of rotating machinery occurs, this provides an exact diagnosis method that shows the fault cause of vibration problem. In order to verify the performance of algorithm, we applied it to diagnose the fault cause of the electric motor.

• 한국정보통신학회논문지
• /
• 제16권3호
• /
• pp.598-604
• /
• 2012

영상신호는 신호를 처리하는 과정에서 다양한 잡음에 의해 훼손되어지며, 이러한 신호를 복원하기 위한 많은 연구가 이루어지고 있다. 본 논문에서는 랜덤 임펄스 잡음을 제거하기 위한 캐스케이드 필터 알고리즘을 제안하였다. 알고리즘은 잡음검출과 잡음제거 등 두 과정으로 구성되었으며, 잡음검출을 위하여 마스크의 분산과 중앙화소에 의한 분산을 이용하였다. 또한, 잡음신호에 대해서 스위칭 self adaptive weighted median 필터로 처리한 후, 변형된 가중치 알고리즘을 적용하여 제거하였다. 제안한 알고리즘은 잡음신호만을 제거하고 비잡음신호는 그대로 보존하여, 우수한 에지 보존특성 및 잡음제거 능력을 나타내었다.

• 한국전자파학회논문지
• /
• 제16권3호
• /
• pp.319-326
• /
• 2005

고속 데이터 전송을 목표로 하는 다중 반송파 시스템인 OFDM통신 시스템에서는 송수신단의 발진기에서 발생하는 위상잡음이 인접 채널간 간섭(ICI: Inter-sub-carrier-interference)을 야기시켜 통신성능에 악영향을 끼친다. 본 논문에서는 ICI 영향을 효과적으로 줄일 수 있는 새로운 data-conjugate 형식의 ICI 제거방법을 제안하고, 위상잡음 선형 근사화 기법을 이용하여 위상잡음에 의해 발생하는 CPE(common phase error), ICI 그리고 CIR(carrier to interference ratio)를 분석한다. 그리고 원래의 OFDM, 기존의 data-conversion 형식의 ICI 제거방법 과 비교하였을 때의 위상잡음에 의한 성능 개선 효과를 분석한다. 결과적으로 ICI 제거방법을 사용하였을 때 성능개선 효과를 얻을 수 있으며, 종전에 연구된 data-conversion 형식의 ICI 제거방법보다 본 연구에서 제안한 data-conjugate 형식의 ICI 제거방법을 사용하였을 때 더 좋은 통신 성능을 얻을 수 있다.

• 한국정보기술학회논문지
• /
• 제16권11호
• /
• pp.61-68
• /
• 2018

도플러 레이더에 응용할 목적으로 전압제어 발진기와 주파수 혼합기가 합쳐진 10.525GHz 자체발진 혼합기 반도체 IC 칩을 실리콘 CMOS 기술을 이용하여 설계하였다. 자체발진 혼합기에 포함된 p-코어 형태의 VCO는 송신신호에 포함된 잡음을 최소화한다. 이 잡음 최소화는 센싱 가능 거리를 늘여서 움직임 감지센서의 도달거리와 도달감도에 유리한 방향으로 작용한다. 위상잡음에 대한 시뮬레이션 결과 P-코어로 설계된 VCO는 1MHz 오프셋에서 -106.008dBc/Hz, 25MHz 오프셋에서 -140.735dBc/Hz의 잡음특성을 가짐으로써 N-코어 및 NP-코어로 설계된 VCO에 비하여 우수한 잡음 특성을 보였다. 본 연구에 의한 p-코어로 설계된 VCO를 이용하여 자체 발진 혼합기를 구현한다면 도달거리와 도달감도가 우수한 움직임 감지센서를 제작할 수 있을 것이다.