• Journal of Broadcast Engineering
• /
• v.21 no.3
• /
• pp.391-403
• /
• 2016

FBMC/OQAM(Filterbank multicarrier on offset-Quadrature Amplitude Modulation) system is a multicarrier modulation which is not need to use cyclic prefix(CP). The CP of OFDM/QAM (orthogonal frequency division multiplexing on Quadrature Amplitude Modulation) system decreases data transmission rate. However, SER(symbol error rate) performance of FBMC/OQAM system is worse than OFDM/QAM system with frequency 1-tap equalization scheme in the frequency selective channel. In this paper, an iterative channel estimation and equalization scheme is performed in a frequency oversampling domain about each sub-channel of FBMC/OQAM system and SER performance using computer simulation is shown. Using the proposed scheme, the SER performance approaches to that of OFDM/QAM system in a frequency selective channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.1039-1044
• /
• 2013

We propose a cancellation algorithm based on Alamouti coded OFDM to mitigate ICI due to Frequency Offset (FO) between distributed antennas in the frequency selective fading channel. In the cancellation algorithm, the interference signal is estimated by using the initial detection symbol and then the estimated interference signal is subtracted from the received signal. As the accuracy of initial symbol increases, ICI cancellation becomes more significant. Therefore, the accuracy of the initial detection symbols is very important in the cancellation algorithm. The proposed scheme improves the accuracy of the initial detection symbol by employing an ICI self-cancellation scheme. The proposed cancellation scheme with only one iteration achieves better performance compared to the conventional cancellation schemes with many times iterations based on the conventional Alamouti coded OFDM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12C
• /
• pp.1142-1148
• /
• 2007

In this paper, we propose ASLM (Adaptive Selective Mapping; ASLM) scheme based on peak observation for PAPR (Peak-to-Average Power Ratio) reduction of OFDM (Orthogonal Frequency Division Multiplexing) signals. The proposed scheme is composed of three steps: peak scaling, sequence selection, and SLM procedures. In the first step, the peak signal samples in the IFFT (Inverse Fast Fourier Transform) outputs of the original input sequence are scaled down. In the second step, the sub-carrier positions where the power difference between the original input sequence and the FFT output of the scaled signal is large, are identified. Then, the phase sequences having the maximum number of phase-reversed sequence words only for these positions are selected. Finally, the generic SLM procedure is performed by using only the selected phase sequences for the original input sequence. Simulation results show that the proposed scheme significantly reduces the complexity in terms of IFFT and PAPR calculation than the conventional SLM, while maintaining the PAPR reduction performance.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.4
• /
• pp.104-115
• /
• 1993

The motion compensated coding (MCC) technique, which exploits the temporal redundancies in the moving images with the motion estimation technique,is one of the most popular techniques currently used. Recently, a variable block size(VBS) motion estimation scheme has been utilized to improve the performance of the motion compensted coding. This scheme allows large blocks to the used when smaller blocks provide little gain, saving rates for areas containing more complex motion. Hence, a new VBS motion estimation scheme with a hierarchical structure is proposed in this paper, in order to combine the motion vector coding technique efficiently. Topmost level motion vector, which is obtained by the gain/cost motion estimation technique with selective motion prediction method, is always transmitted. Thus, the hierarchical VBS motion estimation scheme can efficiently exploit the redundancies among neighboring motion vectors, providing an efficient motion vector encoding scheme. Also, a restricted search with respect to the topmost level motion vector enables more flexible and efficient motion estimation for the remaining lower level blocks. Computer simulations on the high resolution image sequence show that, the VBS motion estimation scheme provides a performance improvement of 0.6~0.7 dB, in terms of PSNR, compared to the fixed block size motion estimation scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.176-182
• /
• 2010

In this paper, we propose an adaptive I/Q diversity combining scheme which reduces unnecessary computations while maintaining the required performance level. The system with the proposed scheme adaptively applies a proper combining scheme among the conventional selective scheme and combining scheme based on the comparison result between the estimated instantaneous SNR and the pre-determined threshold. As a result, the system with our proposed scheme can reduce the computational load while maintaining the required performance level. Some selected simulation results show that the system with the proposed scheme can decrease the unnecessary computations compared with the system with the conventional schemes while maintaining the required performance level.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.1
• /
• pp.72-79
• /
• 2013

In wireless sensor networks, the selective wakeup scheme is one of the energy saving mechanisms, that is used for an object detecting or tracking. Recently, many protocols are proposed using the selective wakeup scheme for the continuous objects tracking such as forest fires and poison gas. They predict the future shape of continuous objects and activate only sensors in the predicted boundary area of the objects. It works correctly in a uniformly deployed wireless sensor networks. However, it cannot be directly applied to a randomly deployed sensor networks with voids. When the predicted area is in the void area, the activation message cannot reach and the predicted area cannot be activated at the right time. It leads to many detection errors for continuous object. Moreover, if a sensor is once foiled in a activation control then the next activation control might be continuously failed. The detection errors can be result in serious harm to people. In this paper, we propose a chaining selective wakeup scheme for robust continuous object tracking in wireless sensor networks. In our protocol, we collect the information of a void area during the network configuration time; if the next boundary area is in the void area, we activate the chained area surrounding the void area with activation control message.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.710-716
• /
• 2007

In this paper, a new scheme of downlink co-channel interference (CCI) cancellation in OFDM cellular networks is introduced for users at the cell-edge. Coordinated symbol transmission between base stations (BS) is operated where the same symbol is transmitted from different BS on different sub-carriers. At the mobile station (MS) receiver, we introduce a soft decision maximum likelihood CCI canceler and a modified maximum ratio combining (M-MRC) to obtain an estimate of the transmitted symbols. Weights used in the combining method are derived from the channels coefficients between the cooperated BSs and the MS. Simulations show that the proposed scheme works well under frequency-selective channels and frequency non-selective channels. A gain of 9 dB and 6 dB in SIR is obtained under multipath fading and flat-fading channels, respectively.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.8 no.1
• /
• pp.11-17
• /
• 2008

Typical wireless sensor networks used in structural monitoring are continuous types wherein data transmission is progressive at all time that may include irrelevant and insignificant data and information. Continuous types of wireless monitoring systems often pose problems of handling large-sized data that may deteriorate the performance of the system. The proposed method is to suggest an event-triggered monitoring system that captures and transmits relevant data only. An error signal generated by the Principal Components Analysis (PCA) is utilized as an index for event detection and selective data transmission. With this new monitoring scheme, the remote server is relieved of unwanted data by receiving only relevant information from the wireless sensor networks. The performance of the proposed scheme was verified with simulation studies.

• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.451-458
• /
• 2010

To detect and recover packet losses over wireless links is very important in terms of reliability in packet transmission. Most wireless communication systems adopt an automatic repeat request (ARQ) protocol operating at link layer. However, it has been constantly addressed that the interaction not harmonized sufficiently between ARQ and TCP rather degrades TCP performance. In this paper, therefore, we propose an improved scheme from the aspect of the interaction with TCP loss recovery mechanism that can be applied to selective repeat ARQ (SR-ARQ) protocol and prove that the proposed scheme improves TCP performance significantly by OPNET simulations.

• Journal of Communications and Networks
• /
• v.10 no.1
• /
• pp.71-78
• /
• 2008

We propose a sub-band spreading technique for adaptive modulation (AM) in orthogonal frequency division multiplexing (OFDM) systems in order to reduce signaling overheads and to average frequency selective fading channels causing different signal-to-noise ratio (SNR) values for subcarriers in each subband. The conventional sub-band based AM schemes can also reduce signaling overheads and complexity for allocating a resource per sub-band at a time. However, they may suffer from the channel variation in a sub-band when the sub-band size is larger than the channel coherence bandwidth (BW). The sub-band spreading at the transmitter enables the received symbols in each sub-band to have an identical reliability even in a frequency selective fading channel. We rigorously analyze the averaged SNR value at the receiver of the sub-band spreading system and the analyzed average SNR in a sub-band is used for an adaptation criterion. The proposed AM scheme outperforms the conventional sub-band based OFDM scheme without spreading, and it can yield better throughput performance than the conventional subcarrier based AM schemes when we consider the signaling overheads.