• 한국태양에너지학회 논문집
• /
• 제32권4호
• /
• pp.43-50
• /
• 2012

Metal-metal oxide (M-M oxide) cermet solar selective coatings with a double cermet layer film structure were deposited on the Al-deposited glass substrate by using a directed current (DC) magnetron sputtering technology. M oxide (CrO and ZrO) was used as the ceramic component in the cermets, and Cr and Zr used as the metallic components. In addition, black Cr (Cr-$Cr_2O_3$ cermet) solar selective coatings were deposited on the Ni-plated Cu substrate by using a electroplating method for comparison. The thermal stability tests were carried out for performance evaluation of solar coatings. Reflectance measurements were used to evaluate both solar absorptance(${\alpha}$) and thermal emittance (${\epsilon}$) of the solar coatings before and after thermal testing by using a spectrometer. Optical properties of optimized cermet solar coatings were ${\alpha}{\simeq}0.94-0.96$ and ${\epsilon}{\simeq}0.1$ ($100^{\circ}C$). The results of thermal stability test of M-M oxide solar coatings showed that the Cr-CrO cermet solar selective coatings were more stable than the Zr-ZrO cermet selective coatings at temperature of both $400^{\circ}C$ in air and $450^{\circ}C$ in vacuum. The black Cr solar selective coatings were degraded in air at temperature of $400^{\circ}C$. The main optical degradation modes of these coatings were diffusion of metal atoms, and oxidation.

• 공업화학
• /
• 제27권3호
• /
• pp.227-238
• /
• 2016

본 리뷰 논문은 지지화된 또는 고정화된 금속들 중 선택적 알코올 산화 반응에 적용된 나노 크기의 여러 금속 촉매들에 대해 집중적으로 서술한다. 금속 나노 촉매들은 넓은 표면적을 지닌 고체 지지체들의 표면 위에 금속 나노 입자들의 고른 분산을 통해 얻어진다. 이러한 나노 촉매들은 유기 합성, 연료 전지, 바이오 디젤 생산, 오일 크래킹, 에너지변환 및 저장, 의약, 수처리, 고체 로켓 추진체, 염료 제조 등 학문적 산업적 측면 모두 다양하게 사용될 수 있다. 더욱이, 응용성이 풍부한 중간체들을 생산하는 호기성 알코올 산화 반응에서 금속 나노 재료는 촉매로써 매우 중요하다. 금, 팔라듐, 류테늄, 바나디움 등과 같은 지지화된 금속 나노 촉매들의 알코올 산화 반응은 기존의 화학 당량적 반응과 달리 비용을 경감시키고 부반응물들을 줄임으로써 경제적이고 친환경적이다. 뿐만 아니라, 상온에서 진행된 나노 촉매 알코올 산화 반응에 대해서도 소개된다.

• 한국자기공명학회논문지
• /
• 제15권2호
• /
• pp.137-145
• /
• 2011

Hsp33, a prokaryotic molecular chaperone, exerts holdase activity in response to oxidative stress. In this study, the stepwise conformational change of Hsp33 upon oxidation was monitored by NMR. In order to overcome its high molecular weight (33 kDa as a monomer and 66 kDa as a dimer), spectra were simplified using a selectively [$^{15}N$]His-labeled protein. All of the eight histidines were observed in the TROSY spectrum of the reduced Hsp33. Among them, three peaks showed dramatic resonance shifts dependent on the stepwise oxidation, indicating a remarkable conformational change. The results suggest that unfolding of the linker domain is associated with dimerization, but not entire region of the linker domain is unfolded.

• Korean Chemical Engineering Research
• /
• 제46권3호
• /
• pp.498-505
• /
• 2008

천연망간광석과 천연망간광석에 금속산화물을 $Al_2O_3$와 $TiO_2$에 담지한 촉매을 이용하여 저온 선택적 산화 반응에 대하여 연구하였다. 망간계 금속산화물은 낮은 온도에서 우수한 암모니아 전환율을 나타내었다. NMO 존재하의 저온에서의 $O_2$와 $NH_3$의 흡착 활성화에너지는 각각 10.5와 22.7 kcal/mol 임을 밝혔다. 망간광석에 미량의 Ag를 함침함으로써 활성온도를 크게 낮출 수 있었다. 티타니아 담체의 경우 저온활성이 우수하게 나타나는 특성을 보였다. 또한 구리와 망간을 사용하면 망간을 단독으로 사용한 경우보다는 저온의 활성이 우수하게 나타난다. 망간이 5 wt.% 이상에서는 동일한 전환율을 나타내고 있으며, 저온 활성이 15 wt.%까지 약간 증가함을 알 수 있으며, 20 wt.%에서는 오히려 감소하는 것으로 나타나 있다. 황산화물의 피독실험 결과 본 연구에서는 최종적으로 망간에 조촉매의 첨가에 의한 내피독성의 향상은 공정의 복잡성과 비용면에서 망간의 단독 사용보다 낮게 나타났다.

• 청정기술
• /
• 제8권1호
• /
• pp.53-59
• /
• 2002

공침-액상산화법으로 $Cu-CeO_2$ 촉매를 제조하여 선택적 산화반응에 대한 활성을 실험적으로 고찰하였다. $Cu-CeO_2$ 촉매는 일산화탄소의 선택적 산화반응에 우수한 활성을 보였으나, 구리의 담지량과 촉매 활성 사이의 일정한 상관관계를 찾을 수 없었다. 또한 구리의 담지량이 증가함에 따라 $CeO_2$의 세공 구조가 변하는 것을 확인할 수 있었으며 이는 Cu와 $CeO_2$가 고용체를 형성하기 때문으로 확인되었다. 촉매 전처리인 환원처리를 통한 Cu와 $CeO_2$의 고용체 형성이 촉매의 일산화탄소의 선택적 산화반응에 대한 활성을 증가시켰다.

• 대한금속재료학회지
• /
• 제49권4호
• /
• pp.281-290
• /
• 2011

In order to gain better understanding of the selective surface oxidation and its influence on the galvanizability of a transformation-induced plasticity (TRIP) assisted steel containing 1.5 wt.% Si and 1.6 wt.% Mn, a model experiment has been carried out by depositing Si and Mn (each with a nominal thickness of 10 nm) in either monolayers or bilayers on a low-alloy interstitial-free (IF) steel sheet. After intercritical annealing at $800^{\circ}C$ in a $N_2$ ambient with a dew point of $-40^{\circ}C$, the surface scale formed on 590 MPa TRIP steel exhibited a microstructure similar to that of the scale formed on the Mn/Si bilayer-coated IF steel, consisting of $Mn_{2}SiO_{4}$ particles embedded in an amorphous $SiO_{2}$ film. The present study results indicated that, during the intercritical annealing process of 590 MPa TRIP steel, surface segregation of Si occurs first to form an amorphous $SiO_{2}$ film, which in turn accelerates the out-diffusion of Mn to form more stable Mn-Si oxide particles on the steel surface. During hot-dip galvanizing, particulate $Fe_{3}O_{4}$, MnO, and Si-Mn oxides were reduced more readily by Al in a Zn bath than the amorphous $SiO_{2}$ film. Therefore, in order to improve the galvanizability of 590 TRIP steel, it is most desirable to minimize the surface segregation of Si during the intercritical annealing process.

• 한국연소학회지
• /
• 제12권4호
• /
• pp.39-46
• /
• 2007

The technique of $NH_3$ SCR (selective catalytic reduction) assisted by plasma oxidation has been applied to a 2,000 cc diesel engine. The present combined $deNO_x$ process consists of two steps. The first step is that about 50% of emitted NO from the engine is oxidized to $NO_2$ in a plasma oxidation process. The second step is that NO and $NO_2$ are simultaneously reduced to $N_2$ in the $NH_3$ SCR process. The engine test results showed that the $deNO_x$ rates of the present combined process are higher than those of conventional SCR process by 20%. Such a high performance of the combined process is noticeable especially, when the exhaust temperature are relatively low, i.e., $170-220^{\circ}C$. To provide a feasibility of the present technique the effects of operating conditions, such as an electrical input energy, an exhaust gas temperature, an initial NO concentration, and the amount of hydrocarbon addition, were discussed.

• 한국환경과학회지
• /
• 제22권8호
• /
• pp.945-951
• /
• 2013

Alumina-supported catalysts containing different transition metals such as Cu, Cr, Mn, Zn, Co, W were investigated for their activity in the selective oxidation of toluene. Catalytic oxidation of toluene was investigated at atmospheric pressure in a fixed bed flow reactor system over transition metals with $Al_2O_3$ catalyst. The result showed the order of catalytic activities for the complete oxidation of toluene was Mn > Cu> Cr> Co> W> Zn for 5wt.% transition $metals/Al_2O_3$. $Mn/Al_2O_3$ catalysts containing different amount of Mn were characterized by X-ray diffraction spectroscopy for decision of loading amount of metal to alumina. 5 wt.%$Mn/Al_2O_3$ catalyst exhibits the highest catalytic activity, over which the toluene conversion was up to 90% at a temperature of $289^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제26권2호
• /
• pp.281-284
• /
• 2005

The Fe/MgO catalysts with different Fe loadings (1, 4, 6, 15 and 30 wt% Fe) were prepared by a wet impregnation with iron nitrate as precursor. All of the catalysts were characterized by BET surface analyzer, X-ray diffraction (XRD), temperature-programmed reduction (TPR), and X-ray photoelectron spectroscopy (XPS). The maximum removal capacity of $H_2S$ was obtained with 15 wt% Fe/MgO catalyst which had the highest BET surface area among the measured catalysts. XRD of Fe/MgO catalysts showed that well dispersed Fe particles could be present on Fe/MgO with Fe loadings below 15 wt%. The crystallites of bulk $\alpha$-$Fe_2O_3$ became evident on 30 wt% Fe/MgO, which were confirmed by XRD. TPR profiles showed that the reducibility of Fe/MgO was strongly related to the loaded amounts of Fe on MgO support. Therefore, the highest removal efficiency of $H_2S$ in wet oxidation could be ascribed to a good dispersion and high reducibility of Fe/MgO catalyst. XPS studies indicated that the $H_2S$ oxidation with Fe/MgO could proceed via the redox mechanism ($Fe^{3+}\;{\leftrightarrow}\;Fe^{2+}$).

• 대한방사성의약품학회지
• /
• 제7권2호
• /
• pp.85-91
• /
• 2021

Selective amino acid conjugation of bulky antibodies is a valuable asset for real-time diagnosis and therapy. However, selective conjugation incorporating a chelate-bearing radioactive atom into an antibody without affecting its immunoreactivity is a challenging task. A bifunctional chelator (BFC), a selective amino acid-targeting probe, and a linker have been developed to overcome this problem. Here, we report the synthesis of a novel propylene cross-bridged chelator (PCB)-1,8-N,N'-bis-(carboxymethyl)-1,4,8,11-tetraazacyclotetradecane (TE2A)-luminol BFC via a click reaction and radiolabel it with a ⁶⁴Cu ion for tyrosine-selective conjugation of trastuzumab. In the initial optimization study, we tried different oxidative addition conditions such as electro-oxidation, hemin, horseradish peroxidase, iodogen tube, chloramine-T, and iodo beads. In this study, up to 82% of ⁶⁴Cu-PCB-TE2A-luminol was conjugated with the antibody in an iodo bead-catalyzed oxidative addition reaction with an isolated yield of 24.4%.