• 자원리싸이클링
• /
• 제11권3호
• /
• pp.10-16
• /
• 2002

폐리튬이온전지로부터 추출한 $LiCoO_2$의 침출에서 황산, 질산과 같은 강산은 Co와 Li을 완전 용해시키므로 Co와 Li을 분리하여 회수하기 위해서는 별도의 공정이 필요하다. 낮은 pH에서 Co oxalate의 용해도가 낮다는 점을 착안한 oxalic acid 침출에서 양극활물질로부터 Co를 선택적으로 회수하는 연구를 수행하였다. 변수실험으로 도출된 최적조건, oxalic acid 3M, 침출온도 $80^{\circ}C$, 초기 광액농도 50g/L.의 조건에서 순수한 $LiCoO_2$를 침출한 결과, Li이 95% 이상 용해되는 반면에 Co는 1% 이하의 침출율을 나타내었다. 같은 침출조건에서 폐리튬이온전지로부터 선별한 양극활물질을 침출한 결과, Co와 Li의 침출율은 각각 0.25%, 99%로 높은 선택성을 보였다. 용액 중에 잔류하는 Li은 $Na_2$$CO_3$혹은 LiOH을 첨가하여 Li 탄산염 흑은 Li 수산화물의 형태로 회수할 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1625-1631
• /
• 2013

We report a facile synthetic approach of high-quality chromium(III) terephthalate [MIL-101(Cr)] by acetate-assisted method in the absence of toxic HF. Results indicate that the morphology and surface area of the MIL-101(Cr) can be tuned by modifying the molar ratio of acetate/$Cr(NO_3)_3$. The Brunauer-Emmett-Teller (BET) surface area of MIL-101(Cr) synthesized at the optimized condition can exceed 3300 $m^2/g$. It is confirmed that acetate could promote the dissolution of di-carboxylic linker and accelerate the nucleation ratio. So the pure and small size of MIL-101(Cr) with clean pores can be obtained. $CO_2$, $CH_4$ and $N_2$ adsorption isotherms of the samples are studied at 298 K and 313 K. Compared with the traditional method, MIL-101(Cr) synthesized by acetate-assisted method possess enhanced $CO_2$ selective adsorption capacity. At 1.0 bar 298 K, it exhibits 47% enhanced $CO_2$ adsorption capacity. This may be attributed to the high surface area together with clean pores of MIL-101(Cr).

• Journal of Pharmaceutical Investigation
• /
• 제35권6호
• /
• pp.445-451
• /
• 2005

As a selective ${\alpha}_{1A}-adrenoreceptor$ antagonist, tamsulosin has been used clinically for urinary obstructed patients with benign prostatic hyperplasia. The single and multi-layered pellets containing tamsulosin hydrochloride were prepared in an effort to control the drug release, avoiding dose-dependent side effects of tamsulosin hydrochloride upon oral administration. The drug release from multi-layered pellets was substantially controlled, compared with single layered pellets. The drug release from coated pellets with single or multi layer was affected by the nature of coating agent, the percentage of coating level and the presence of hydrophilic material in coating layer. In conclusion, the controlled release oral delivery system using multi-layered pellet is very useful for tamsulosin hydrochloride, resulting in improvement of patient compliance and therapeutic drug levels for a longer period of time.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(2)
• /
• pp.1179-1180
• /
• 2005

To immobilize the pollutants from wastewater in situ, two phosphatic clays collected from different areas in Egypt (eastern and western Sebaia, Aswan-Isna, Upper Egypt) used to remove contaminant ions from industrial wastewater. Obtained results confirmed the strong relationship between phosphatic clay and Pb elimination from wastewater. The sensitivity classification of phosphatic clay toward ions retained as described in three categories: highly sensitive to retain Pb , Al and Cr ; moderately sensitive for Mn; and weakly sensitive for Band Zn. Data suggested that large fraction of Pb removed by phosphatic clays stayed intact under a wide variation in extracting solution pH (3-11). In situ immobilization is considered a promising technique that has the potential to remove contaminant ions from wastewater. Two important factors need to be considered when applying this technique: The first, is the clay must be effective and selective under different composition of wastewater. The second, is the immobilized ions should be stable and non-leacheable under varying water conditions. Phosphatic clays with $Pb^{2+}$ were suitable to achieve these two factors. Possible mechanism for removal $Pb^{2+}$ by phosphatic clays is the formation of fluoropyromorphite through the dissolution of fluoro and hydroxyl apatite by its precipitation from solution, beside, Pb complexation at phosphatic clay surface at P-OH sites.

• 전기화학회지
• /
• 제15권3호
• /
• pp.135-148
• /
• 2012

Ionic liquids are steadily attracting interests throughout a recent decade and their application is expanding into various fields including electrochemistry due to their unique properties such as non-volatility, inflammability, low toxicity, good ionic conductivity, wide electrochemical potential window and so on. These features make ionic liquids become an alternative solution for electrodeposition of metals that cannot be electroplated in aqueous electrolytes. In this review, we classify investigated metals into three categories, which are light (Li, Mg), refractory (Ti, Ta) and noble (Pd, Pt, Au) metals, rather than covering the exhaustive list of metals and try to update the recent development in this area. In electrodeposition of light metals, granular fine Li particles were successfully obtained while the passivation of electrodeposited Mg layers is an obstacle to reversible deposition-dissolution process of Mg. In the case of refractory metals, the quality of Ta and Ti deposit particles was effectively improved with addition of LiF and pyrrole, respectively. In noble metal category, EMIM TFSA ionic liquid as an electrolyte for Au electrodeposition was proven to be effective and BMP TFSA ionic liquid developed a smooth Pd deposit. Pt nanoparticle production from ionic liquid droplet in aqueous solution can be cost-effective and display an excellent electrocatalytic activity.

• Journal of Electrochemical Science and Technology
• /
• 제4권1호
• /
• pp.41-45
• /
• 2013

Platinum is a well known element which shows a significant electrocatalytic activity in many important applications. In glucose sensor, because of the poisoning effect of reaction intermediates and the low surface area, the electrocatalytic activity towards the glucose oxidation is low which cause the low sensitivity. So, we fabricate a nanoporous PtZn alloy electrode by deposition-dissolution method. It provides a high active surface and a large enzyme encapsulating space per unit area when it used for an enzymatic glucose sensor. Glucose oxidase was immobilized on the electrode surface by capping with PEDOT composite and PPDA. The composite and PPDA also can exclude the interference ion such as ascorbic acid and uric acid to improve the selectivity. The surface area was determined by cyclic voltametry method and the surface structure and the element were analyzed by Scanning Electron Microscope (SEM) and Energy Dispersive X-ray spectroscopy (EDX), respectively. The sensitivity is $13.5{\mu}A/mM\;cm^2$. It is a remarkable value with such simply prepared senor has high selectivity.

• 대한금속재료학회지
• /
• 제48권11호
• /
• pp.1014-1020
• /
• 2010

In order to improve the purity on deposit in cobalt electrowining, a fundamental study using Pulse-Reverse Current (PRC) was carried out. Based on a sulfate solution, Cu, Ni, and Fe as impurities were added during cobalt electrowinning. There were four reverse waveforms and frequency conditions from 1 Hz to 10 kHz, and the purity of each condition was compared with the Direct Current (DC) purity. From the results, it was found that the anodic potential induced by reverse current affects selective dissolution of impurities. In this work, the case of the highest reverse peak current density ($I_r$) with a short reverse time ($t_r$) at 100 Hz showed a higher purity than that of the DC. This PRC condition also showed only a 4% low current efficiency comparable to the DC. We concluded that an optimized PRC for cobalt electrowinning could improve the purity with little loss of current efficiency.

• Advances in concrete construction
• /
• 제3권1호
• /
• pp.71-90
• /
• 2015

In order to investigate the feasibility and advantage of tuff used as pozzolan in cement-based composite, the representative specimens of tuff were collected, and their chemical compositions, proportion of vitreous phase, mineral species, and rock structure were measured by chemical composition analysis, petrographic analysis, and XRD. Pozzolanic activity strength index of tuff was tested by the ratio of the compression strength of the tuff/cement mortar to that of a control cement mortar. Pozzolanic reaction degree, and the contents of CH and bond water in the tuff/cement paste were determined by selective hydrochloric acid dissolution, and DSC-TG, respectively. The tuffs were demonstrated to be qualified supplementary binding material in cement-based composite according to relevant standards. The tuffs possessed abundant $SiO_2+Al_2O_3$ on chemical composition and plentiful content of amorphous phase on rock texture. The pozzolanic reaction degrees of the tuffs in the tuff/cement pastes were gradually increased with prolongation of curing time. The consistency of CH consumption and pozzolanic reaction degree was revealed. Variation of the pozzolanic reaction degree was enhanced with the bond water content and relationship between them appeared to satisfy an approximating linear law. The fitting linear regression equation can be applied to mutual conversion between pozzolanic reaction degree and bond water content.

• 방사성폐기물학회지
• /
• 제8권2호
• /
• pp.115-122
• /
• 2010

본 연구는 $H_2O_2$가 함유된 ($Na_2CO_3-NaHCO_3$) 혼합 탄산염 계에서 사용후핵연료를 산화용해할 시 U과 함께 공용해 되는 Cs, Te, Tc, Mo 등의 핵분열생성물로부터 Cs과 Tc의 선택적 침전 제거 거동을 규명하였다. Cs과 Tc은 각각 장수명 핵종으로 지하에서의 빠른 핵종 이동성과 고방열성 등으로 최종 처분 시 처분 환경을 저해하는 핵종으로 처분 안전성 제고 측면에서 이들의 제거는 중요한 과제 중의 하나이다. Cs과 Re (Tc 대용원소)의 선택적 침전제로는 각각 NaTPB, TPPCl를 선정하였으며, NaTPB에의한 Cs 침전 및 TPPCl에 의한 Re 침전 모두 5분 이내로 매우 빠르게 이루어졌으며, 온도를 $50^{\circ}C$, 교반속도를 1000 rpm 까지 증가시켜도 이들의 침전 속도에는 별 영향이 없었다. NaTPB 침전 및 TPPCl 침전에 있어 가장 중요한 요인은 침전 용액의 pH 이며, 특히 TPPCl에 의한 Re의 선택적 침전의 경우 낮은 pH 에서 Mo가 Re과 공침되므로 pH 9 이상에서 수행하는 것이 효과적이다. 그리고 [NaTPB]/[Cs] 및 [TPPCl]/[Re]의 몰 농도 비 1 이상에서 Cs 및 Re을 각각 99% 이상 선택적으로 침전 제거할 수 있었다.

• Journal of Pharmaceutical Investigation
• /
• 제33권4호
• /
• pp.311-317
• /
• 2003

Felodipine is a calcium antagonist that lowers blood pressure by reducing peripheral resistance by meas of a direct, selective action on smooth muscle in arterial resistance vessels. Futhermore, it have been approved for the effective in angina pectoris and cardiac failure. The purpose of the present study was to evaluate the bioequivalence of two felodipine extended release (ER) tablets, Splendil (YuHan Corporation) and Stapin (Hana Pharmaceutial Co., Ltd.), according to the guidelines of Korea Food and Drug Administration (KFDA). The felodipine release from the two felodipine formulations in vitro was tested using KP VIII Apparatus II method at pH 6.5 buffer solution. Twenty six healthy male subjects, $22.73{\pm}1.78$ years in age and $66.66{\pm}7.28\;kg$ in body weight, were divided into two groups and a radomized $2{\times}2$ cross-over study was employed. After two tablets containing 5 mg as felodipine were orally administered, blood sample was taken at predetermined time intervals and the concentrations of felodipine in serum were determined using column-switching HPLC method with UV detector. The dissolution profiles of two formulations were similar at pH 6.5 buffer solution. Besides, the pharmacokinetic parameters such as $AUC_t,\;C_{max}\;and\;T_{max}$ were calculated and ANOVA test was utilized for the statistical analysis of the parameters using logarithmically transformed $AUC_t\;and\;C_{max}$ and untransformed $T_{max}$. The results showed that the differences between two formulations based on the Splendil were 2.53%, 1.32% and 18.32% for $AUC_t,\;C_{max}\;and\;T_{max}$, respectively. There were no sequence effects between two formulations in these parameters. The 90% confidence intervals using logarithmically transformed data were within the acceptance rage of log(0.86) to log(1.25) $(e.g.,\;log(0.86){\sim}log(1.20)\;and\;log(0.89){\sim}log(1.23)\;for\;AUC_t,\;C_{max},\;respectively)$. Thus, the criteria of the KFDA guidelines for the bioequivalence was satisfied, indicating Stapin ER tablet and Splendil ER tablet are bioequivalent.