• 가정과삶의질연구
• /
• 제21권2호
• /
• pp.131-144
• /
• 2003

Selective Optimization with Compensation (SOC), a concept defined by Baltes and Baltes, is known to predict successful aging. This study was conducted to find out which factors affect Korean elderly people SOC The data for this study were obtained from a survey conducted between March and May 2001, on a sample of middle-class male and female participants over 60 years old. Two hundred and fifty four completed questionnaires were used for final analyses. Descriptive statistics, t-test, ANOVA, Duncan test, Pearson correlations, multiple regressions, multiple response frequencies and sequential threshold methods were used to analyze the data. In order to measure successful aging, the Selective Optimization with Compensation Scale developed by Baltes, Baltes, Freud, and Lang (1996) was used. The SOC scale consists of four subscales, Elective Selection, Loss-based Selection, Optimization, and Compensation. The major findings are summarized in the following. First, the level of SOC by various socio-demographic variables was examined. It tuned out that health status is the most important variable in predicting SOC. Also important was satisfaction with family life. Second, significant correlations were found between SOC and duration of the marriage (negative), practicing a religion, health, and economic stability (all positive). Third, religion and health status affected SOC, but health was a stronger predictor Those who practiced a religion and were healthy had a higher score in SOC as a whole. Fourth, the participants were divided into three groups by their SOC score, and their idea.; of successful aging were compared. The top- and middle-score groups considered satisfaction with family life to be more important, whereas the bottom-score group regarded the social status as more important.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.819-829
• /
• 2015

This paper presents a shunt active power filter (SAPF) for compensating inter-harmonics and harmonics when inter-harmonics content is evident in the grid. The principle of inter-harmonics generation in the grid was analyzed, and the inter-harmonics effect on repetitive controllers was discussed in terms of control performance. Traditional repetitive controllers are not applicable in inter-harmonic compensation. Moreover, the effect of an ideal controller on harmonics signals was analyzed on the basis of the internal model principle. The repetitive controller was improved in the form of a basis function according to theoretical analysis. The finite-dimensional repetitive controller, which is also called the multiple-period repetitive controller, was designed for the control of multiple periodic signals. A selective harmonic compensation system was developed with SAPF. This system can be used to compensate harmonics and inter-harmonics in the grid. Finally, system control performance was verified by simulation and experimental results.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.576-582
• /
• 2011

This paper presents a novel control strategy for selective compensation of power quality (PQ) problems, depending upon the limited rating of voltage source inverters (VSIs), through a unified power quality conditioner (UPQC) in a three-phase four-wire distribution system. The UPQC is realized by the integration of series and shunt active power filters (APFs) sharing a common dc bus capacitor. The shunt APF is realized using a three-phase, four-leg voltage source inverter (VSI), while a three-leg VSI is employed for the series APF of the three-phase four-wire UPQC. The proposed control scheme for the shunt APF, decomposes the load current into harmonic components generated by consumer and distorted utility. In addition to this, the positive and negative sequence fundamental frequency active components, the reactive components and harmonic components of load currents are decomposed in synchronous reference frame (SRF). The control scheme of the shunt APF performs with priority based schemes, which respects the limited rating of the VSI. For voltage harmonic mitigation, a control scheme based on SRF theory is employed for the series APF of the UPQC. The performance of the proposed control scheme of the UPQC is validated through simulations using MATLAB software with its Simulink and Power System Block set toolboxes.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.419-427
• /
• 2010

A parallel control strategy in capacity proportion frequency allocation mode for shunt active power filters (APFs) is proposed to overcome some of the difficulties in high power applications. To improve the compensation accuracy and overall system stability, an improved selective harmonic current control based on multiple synchronous rotating reference coordinates is presented in a single APF unit, which approximately implements zero steady-state error compensation. The combined decoupling strategy is proposed and theoretically analyzed to simplify selective harmonic current control. Improved selective harmonic current control forms the basis for multi-APF parallel operation. Therefore, a parallel control strategy is proposed to realize a proper optimization so that the APFs with a larger capacity compensate more harmonic current and the ones with a smaller capacity compensate less harmonic current, which is very practical for accurate harmonic current compensation and stable grid operation in high power applications. This is verified by experimental results. The total harmonic distortion (THD) is reduced from 29% to 2.7% for a typical uncontrolled rectifier load with a resistor and an inductor in a laboratory platform.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.943-946
• /
• 2000

Selective laser sintering(SLS) is a solid freeform fabrication process whereby a part is built layerwise by scanning a powder bed. The properties of metal powder are dependent on the heat, it is not easy to do the exact error compensation with analysis and estimation by modeling. This paper suggests that the error is compensated by experimental method and then the accuracy of shape is enhanced by revising of STL file. Also bonding force is measured by an experiment with change of process path.

• 한국통신학회논문지
• /
• 제33권3A호
• /
• pp.225-234
• /
• 2008

직접변환 수신기를 사용하는 OFDM (Orthogonal Frequency Division Multiplexing) 시스템의 경우 로컬 오실 레이터 및 저역통과 필터에 의해 발생하는 주파수 선택적 또는 비선택적 특성을 갖는 위상 및 이득 불균형으로 인해 성능 저하가 발생한다. 본 논문에서는 주파수 선택적 또는 비선택적 특성을 갖는 송수신기 IQ 불균형 성분들이 시스템에 초래하는 영향을 분석하고, 동시에 이 성분들을 추정 및 보상하는 방안을 제시하였다. 주파수 영역에서 Alamouti 코딩된 프리엠블을 사용할 경우 채널 성분 뿐만아니라 IQ 불균형 성분까지도 정확히 추정 및 보상할 수 있다. IQ 불균형이 존재하는 수신 신호에 대해 ML(Maximum Likelihood) 또는 OSIC(Ordered Successive Interference Cancellation) 신호 검출 기법을 이용하여 SER (Symbol Error Rate) 성능검증을 통해 주파수 선택적 채널 계수와 송수신 IQ 불균형 성분의 결합에 의하여 초래되는 다이버시티 이득으로 인해 기존의 간섭억제 기법인 ZF (Zero-forcing) 기법에 비해 성능향상이 있음을 보인다.

• 한국컴퓨터정보학회논문지
• /
• 제18권7호
• /
• pp.79-84
• /
• 2013

본 논문에서는 파일럿 심벌을 이용하여 플랫 페이딩 채널에서 페이딩 정보를 예측하여 보상하는 방식인 PSAM(Pilot Symbol Assisted Modulation) 방식에 대해 주파수 선택적 Rayleigh 페이딩 채널에서 지연파의 영향을 받는 경우 발생하는 문제점 등을 분석하고 이를 개선하기 위하여 고차 PS(Pilot Symbol) QAM 채널보상 방식을 제안한다. 기존의 PSAM 방식은 지연파의 지연강도가 조금만 영향을 미치더라도 SNR(Signal-to-Noise Ratio)에 상관없이 심각한 성능저하를 보이지만 제안된 방식은 지연파의 지연강도에 영향을 받지만 안정적인 성능개선을 보인다.

• 한국컴퓨터산업학회논문지
• /
• 제8권4호
• /
• pp.263-268
• /
• 2007

본 논문에서는 시불변 전송 채널 및 주파수 선택성 페이딩 채널에서 최소 제곱 평균 알고리즘과 순차적 최소 제곱 알고리즘에 선형 탭 지연선 구조를 도입하여 보상 알고리즘의 제곱 평균 에러 특성을 고찰하였다. 또한 기존의 방식에서 사용하는 단일 탭 갱신 알고리즘과 본 논문에서 제안한 다중 탭 갱신 알고리즘을 비교, 분석하고 이를 수렴 특성 관점에서 고찰하였다.

• ETRI Journal
• /
• 제37권1호
• /
• pp.43-53
• /
• 2015

In this paper, a selective coefficient updating (SCU) approach at each branch of the per-tone equalization (PTEQ) structure has been applied for insufficient cyclic prefix (CP) length. Because of the high number of adaptive filters and their complex adaption process in the PTEQ structure, SCU has been proposed. Using this method leads to a reduction in the computational complexity, while the performance remains almost unchanged. Moreover, the use of set-membership filtering with variable step size is proposed for a sufficient CP case to increase convergence speed and decrease the average number of calculations. Simulation results show that despite the aforementioned algorithms having similar performance in comparison with conventional algorithms, they are able to reduce the number of calculations necessary. In addition, compensation of both the channel effect and the transmitter/receiver in-phase/quadrature-phase imbalances are achievable by these algorithms.

• 한국정보통신학회논문지
• /
• 제25권4호
• /
• pp.565-571
• /
• 2021

본 논문은 레이더 시스템에 사용되는 상용칩의 주파수 선택적 IQ 불일치를 보상하는 기법을 제안하고, 성능 열화로 인하여 고성능 레이더 시스템에 적용이 어려웠던 상용칩의 사용이, 제안된 기법을 통하여 가능함을 성능 분석을 통하여 보였다. IQ 불일치 보상 성능의 극대화를 위하여 본 논문에서는 특잇값 분해를 통한 차원 축소 기법을 제안하고, 제안된 차원 축소 기법에 기반한 IQ 불일치 복소 보상 여파기의 설계를 위한 최적화 모델을 제안하였다. 제안된 보상 기법의 우수성을 입증하기 위하여 실제 상용칩에 기반한 IQ 불일치 측정 및 보상 시스템을 FPGA로 구현하였으며, 개발된 시스템을 통하여 논문에서 제안하는 방법의 성능을 검증하였다. 성능 검증 결과, 기존 방법과 비교하여 본 논문에서 제안하는 방법이 큰 복잡도 증가 없이 기존 방법의 성능을 뛰어넘는 우수한 성능을 보임을 확인하였다.