Journal of the Korean Crystal Growth and Crystal Technology
/
v.16
no.4
/
pp.157-161
/
2006
InGaN layers on GaN templated sapphire (0001) substrates were grown by mixed-source hydride vapor phase epitaxy (HVPE) method. In order to get InGaN layers, Ga-mixed In metal and $NH_3$ gas were used as group III and group V source materials, respectively. The InGaN material was compounded from chemical reaction between $NH_3$ and indium-gallium chloride farmed by HCl flowed over metallic In mixed with Ga. The grown layers were confirmed to be InGaN ternary crystal alloys by X-ray photoelectron spectroscopy (XPS). In concentration of the InGaN layers grown by selective area growth (SAG) method was investigated by the photoluminescence (PL) and cathodoluminescence (CL) measurements. Indium concentration was estimated to be in the range 3 %. Moreover, as a new attempt in obtaining InAlGaN layers, the growth of the thick InAlGaN layers was performed by putting small amount of Ga and Al into the In source. We found the new results that the metallic In mixed with Ga (and Al) as a group III source material could be used in the growth process of the In(Al)GaN layers by the mixed-source HVPE method.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.16
no.5
/
pp.216-221
/
2006
An investigation of the influence of $WO_3$ and $V_2O_5$ catalysts on the microstructure, phase formation and selective catalytic reduction (SCR) efficiency of the synthesized SCR powders has been carried out. A commercial anatase-$TiO_2$ was used as the catalysts support. For $WO_3(10wt%)/TiO_2$, the W loading to the $TiO_2$ support led to the lower in anatase to rutile transition temperature from $1200^{\circ}C$ of $TiO_2$ support to ${\sim}900^{\circ}C$. The transition temperature was also lowered to below $650^{\circ}C$ in the $V_2O_5$(5 and 10 wt%) added composition. The $WO_3(10wt%)/TiO_2$ SCR powder obtained at $450^{\circ}C$ showed near 100% of $NO_x$ conversion efficiency at $350{\sim}400^{\circ}C$ and for the powder prepared at $650^{\circ}C$ the same efficiency was achieved in wider temperature range $300{\sim}400^{\circ}C$. The highest $NO_x$ conversion efficiency of 100% was obtained in the $V_2O_5(5wt%)/TiO_2$ SCR composition calcined at $650^{\circ}C$ in the relatively wider temperature range $250{\sim}350^{\circ}C$, while the catalytic efficiency considerably decreased for the $V_2O_5(10wt%)/TiO_2$. The lowered conversion efficiency of $NO_x$ observed in the $V_2O_5(10wt%)/TiO_2$ composition calcined at $650^{\circ}C$ was considered to be correlated with the lowered surface area resulting from the increased crystallite growth by highly reactive vanadium loading.
With various Korean domestic soybeans, growth and yields analysis were conducted to select the suitable soybean cultivars for cultivation in paddy field. Distinctive aspects of the soybean growth were observed in paddy field such as retarded growth of top plants and roots, relatively higher T/R ratio followed by overgrowth of top plant. However, growth and yields were significantly different among the cultivars showing 134kg/10a in Paldokong and 385 kg/10a in Doremikong. At V5. and R2 stage, highly positive correlations $(r=0.76^{**}\~0.91^{**})$ were observed between leaf area and dry weight of top plant and/or root. T/R ratio was negatively correlated with dry weight of root $(r=-0.37^*)$ at V5 stage, while significantly correlated with leaf area $(r=-0.37^{**})$ and dry weight of top plant $(r=0.65^{**})$at R2 stage. Among the characters, only 100-seed weight was significantly correlated with yield. Considering the growth characters, 37 cultivars could be included in 3 different groups and genotypic properties such as maturity and growth habit were similar in each group. Nine cultivars in group 1 showed retarded growth from V5 to R2 stage, relatively lower T/R ratio, and good seed ripening. Average yields of the cultivers was 257kg/10a. In group 2, 12 cultivars showed higher T/R ratio due to overgrowth of top plant and lowest average yields (230 kg/l0a) due to poor seed ripening. Sixteen cultivars in group 3 grew fast from V5 to R2 stage representing late maturity traits, low T/R ratio, and good seed ripening. Average yields of the cultivars was highest among groups showing 270kg/l0a. In results, stable self-sufficiency of soybean yields could be expected by selective cultivation with high yielding cultivars ranging from 301 to 385kg/10a, such as Shinpaldalkong 2, Sohokong, Doremikong, Keumkangkong, Bukangkong, Dajangkong, and Geomjeongkong 2, or with cultivars included in group 3.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.17
no.1
/
pp.6-10
/
2007
The a-plane GaN layer on r-plane $Al_2O_3$ substrate is grown by mixed-source hydride vapor phase epitaxy (HVPE). The GaN/InGaN heterostructure is performed by selective area growth (SAG) method. The heterostructure consists of a flown over mixed-sourec are used as gallium (or indium) and nitrogen sources. The gas flow rates of HCl and $NH_3$ are maintained at 10 sccm and 500 sccm, respectively. The temperatures of GaN source zone is $650^{\circ}C$. In case of InGaN, the temperature of source zone is $900^{\circ}C$. The grown temperatures of GaN and InGaN layer are $820^{\circ}C\;and\;850^{\circ}C$, respectively. The EL (electroluminescence) peak of GaN/InGaN heterostructure is at nearly 460 nm and the FWHM (full width at half maximum) is 0.67 eV. These results are demonstrated that the heterostructure of III-nitrides on r-plane sapphire can be successfully grown by mixed-source HVPE with multi-sliding boat system.
A successful experience of lymphatic filariasis control in the Republic of Korea is briefly reviewed. Filariasis in the Republic of Korea was exclusively caused by infection with Brugia malayi. Over the past several decades from the 1950s to 2006, many investigators exerted their efforts to detection, treatment, and follow-up of filariasis patients in endemic areas, and to control filariasis. Mass, combined with selective, treatments with diethylcarbamazine to microfilaria positive persons had been made them free from microfilaremia and contributed to significant decrease of the microfilarial density in previously endemic areas. Significant decrease of microfilaria positive cases in an area influenced eventually to the endemicity of filariasis in the relevant locality. Together with remarkable economic growth followed by improvement of environmental and personal hygiene and living standards, the factors stated above have contributed to blocking the transmission cycle of B. malayi and led to disappearance of this mosquito-borne ancient disease in the Republic of Korea.
Kim, Buyoung;Shin, Byeongkil;Lee, Heesoo;Chun, Ho Hwan
Journal of the Korean Crystal Growth and Crystal Technology
/
v.23
no.6
/
pp.320-324
/
2013
The effects of $CeO_2$ on catalytic activity of $CeO_2-TiO_2$ for the selective catalytic reduction (SCR) of $NO_x$ were investigated in terms of structural, morphological, and physico-chemical analyseis. $CeO_2-TiO_2$ catalysts were synthesized with three different additions, 10, 20, and 30 wt% of $CeO_2$, by the sol-gel method. The XRD peaks of all specimens were assigned to a $TiO_2$ phase (anatase) and the peaks became broader with the addition of $CeO_2$ because it was dispersed as an amorphous phase on the surface of $TiO_2$ particles. The specific surface area of $TiO_2$ increased with the addition of $CeO_2$ from $60.6306m^2/g$ to $116.2791m^2/g$ due to suppression of $TiO_2$ grain growth by $CeO_2$. The 30 wt% $CeO_2-TiO_2$ catalyst, having the strongest catalytic acid sites ($Br{\Phi}nsted$ and Lewis), showed the highest $NO_x$ conversion efficiency of 98 % at $300^{\circ}C$ among the specimens. It was considered that $CeO_2$ contributes to the improvement of the $NO_x$ conversion of $CeO_2-TiO_2$ catalyst by increasing specific surface area and catalytic acid sites.
Plesiomonas shigelloides distributed in the aquatic systems was isolated and identified in this study and compared with the c1inica] isolates in view of their physiological characteristics, Biochemica] charactristics of the isolates of P. shigelloides one sample taken from Gupo and two samples taken from Mu]gum, were studied. However, none was isolated in Haeundae, Dadaepo, Kangdong and Nakdong estuary. The isolated bacteria had an optimum growth condition in peptone water of $25~35^{\circ}C$, pH 7.5-8.0 and 1% NaCI concentration. The cell grew most properly on the selective enrichment media which were made from adding inositol to peptone water. DNase was s]owly produced and the results were different from those of other studies. The components of the fatty acid were 3% of 3-hydroxy]ated fatty acid containing $C_{12}~C_{18}$. 0-10% cyclopropane ($C_{17:0}$), 25~30% hexadecanoic acid ($C_{16:0}$), 32~43% hexadecenoic acid ($C_{16:1}$), 1~2% octadecanoic acid ($C_{16:0}$), and 9~14% octadecenoic acid ($C_{18:1}$). Bacterio]ogica] characteristics, susceptibility of antibiotics, and the components of fatty acid of the c1inica] isolates were similar to those of the strains isolated from the aquatic systems. The strains isolated from c1inica] sources degraded lactose more fast than those isolated from the aquatic systems. There existed resistant bacteria to chlorampenicol in the strains from patients, but there were no resistant bacteria in the strains from the aquatic systems. The components of fatty acid of the clinical isolates were 0~2% $C_{17:0 cyclo}$ and 2~3% $C_{18:0}$, but those of the strains from the aquatic systems were 2~10% and 1~2%, respectvely, which showed the quantitative difference between both components.
Yun, Sook Jung;Lee, Jee Bum;Kim, Kyu Sik;Kim, Young Chul
Tuberculosis and Respiratory Diseases
/
v.61
no.2
/
pp.150-156
/
2006
Background: Gefitinib (ZD 1839, Iressa) is a new anticancer agent; more specifically, it is a selective epidermal growth factor receptor tyrosine kinase inhibitor that is, widely used for various solid cancers, including lung cancer. Cutaneous adverse reactions induced by gefitinib have recently been reported; however, not much on this topic has been reported in the Korean literature. Method: We studied cutaneous adverse reactions of gefitinib in 23 patients who suffered with non-small cell lung cancer at Chonnam National University Hwasun Hospital from October 2004 to September 2005. Result: The patients ranged from 23-72 years old, and there were 17 patients with adenocarcinoma, 5 with squamous cell carcinoma and 1 with bronchioloalveolar carcinoma. The most common adverse reaction was acneiform eruptions in 15 patients (65.2%). This reaction appeared within 2 months after medication, and it didn't correlate with the therapeutic response and tumor type. Pruritus was the second most common reaction (39.1%), which was mild and generalized, especially around eyelid area. Xerosis (26.1%), exfoliation on palm and sole (21.7%), and paronychia (21.7%) followed. Hair breakage and intertrigo were rare adverse reactions. Conclusion: Various cutaneous adverse reactions were observed in patients with non-small cell lung carcinoma after gefitinib treatment. The skin complications could be alleviated with dermatologic consultations and treatments, skin complications could be alleviated.
Recently, according to the rapid progress in Flat-panel-display industry, there has been a growing interest in the poly-Si process. Compared with a-Si, poly-Si offers significantly high carrier mobility, so it has many advantages to high response rate in Thin Film Transistors (TFT's). We have investigated a new process for the high temperature Solid Phase Crystallization (SPC) of a-Si films without any damages on glass substrates using thin film heater. because the thin film heater annealing method is a very rapid thermal process, it has very low thermal budget compared to the conventional furnace annealing. therefore it has some characteristics such as selective area crystallization, high temperature annealing using glass substrates. A 500 $\AA$-thick a-Si film was crystallized by the heat transferred from the resistively heated thin film heaters through $SiO_2$ intermediate layer. a 1000 $\AA$-thick $TiSi_2$ thin film confined to have 15 $\textrm{mm}^{-1}$ length and various line width from 200 to 400 $\mu\textrm{m}$ was used as the thin film heater. By this method, we successfully crystallized 500 $\AA$-thick a-Si thin films at a high temperature estimated above $850^{\circ}C$ in a few seconds without any thermal deformation of g1ass substrates. These surprising results were due to the very small thermal budget of the thin film heaters and rapid thermal behavior such as fast heating and cooling. Moreover, we investigated the time dependency of the SPC of a-Si films by observing the crystallization phenomena at every 20 seconds during annealing process. We suggests the individual managements of nucleation and grain growth steps of poly-Si in SPC of a-Si with the precise control of annealing temperature. In conclusion, we show the SPC of a-Si by the thin film heaters and many advantages of the thin film heater annealing over other processes
Proceedings of the Korean Vacuum Society Conference
/
2010.08a
/
pp.244-245
/
2010
최근 광전자 분야에서는 미래 에너지 자원에 대한 관심과 함께 GaN 기반 발광다이오드 및 태양전지 연구가 활발히 진행되고 있다. GaN는 높은 전자 이동도와 높은 포화 속도 등의 광전자 소자에 유리한 특성을 가지고 있으나, 고 인듐 함유량과 막질의 우수한 특성을 동시에 구현하는 것은 매우 어렵다. 이를 극복하기 위한 방법으로써 선택 영역 박막 성장법(Selective Area Growth)은 마스크 패터닝을 통해 제한된 영역에서만 박막을 성장하는 방법으로써 GaN의 막질을 향상 시킬 수 있는 방법으로 주목받고 있다. 본 논문에서는 대면적 기판에서 GaN의 막질 향상뿐만 아니라 고인듐 InGaN 박막 성장을 위하여 서브마이크로미터 주기와 크기를 갖는 홀 패턴을 포토리소그라피 공정 최적화를 통해 구현할 수 있는 방법에 대해 논의한다. 그림. 1은 사파이어 기판 위에 선택 영역 박막 성장법을 이용하여 성장한 n-GaN/활성층/p-GaN의 구조를 나타낸 그림이다. 이를 통하여 서브마이크로미터 스케일의 반극성 InGaN면 위에 높은 인듐 함유량을 가지면서도 우수한 특성을 갖는 박막을 얻을 수 있다. 본 실험을 위하여 사파이어 기판 위에 SiO2를 증착한 후 포토레지스트(AZ5206)을 도포하고 포토리소그라피 공정을 진행하여 2um 크기 및 간격을 갖는 패턴을 형성했다. 그림. 2는 AZ5206에 UV를 조사(5초)하고 현상(23초)한 패턴을 윗면(그림. 2(a))과 $45^{\circ}$ 기울인 면(그림. 2(b)) 에서 본 SEM(Scanning Electron Microscope) 사진이다. 이를 통해 약 2.2um의 홀 패턴이 선명하게 형성 됨을 볼 수 있다. 그 후 수백나노 직경의 홀을 만들기 위해서 리플로우 공정을 수행한다. 그림. 3은 리플로우 온도에 따른 패턴의 홀 모양을 AFM(Atomic Force Microscope)을 이용하여 측정한 표면의 사진이다. 이를 통해 2차원 평면에서 리플로우 온도 및 시간에 따른 변화를 볼 수 있다. 그림.3의 (a)는 리플로우 공정을 진행하기 전 패턴이고, (b)는 $150^{\circ}C$에서 2분, (c)는 $160^{\circ}C$에서 2분 (d)는 $170^{\circ}C$에서 2분 동안 리플로우 공정을 진행한 패턴이다. $150^{\circ}C$와 $160^{\circ}C$에서는 직경에 큰 변화가 없었고, $160^{\circ}C$에서는 시료별 현상 시간 오차에 따라 홀의 크기가 커지는 경향이 나타났다. 그러나 $170^{\circ}C$에서 2분간 리플로우 한 시료 (그림. 3(d))의 경우는 홀의 직경이 ~970nm 정도로 줄어든 것을 볼 수 있다. 홀의 크기를 보다 명확히 표현하기 위해 그림.3에 대응시켜 단면을 스캔한 그래프가 그림.4에 나타나 있다. 그림.4의 (a) 및 (b)의 경우 포토레지스트의 높이 및 간격이 일정하므로, 리플로우에 의한 영향은 거의 없었다. 그림. 4(c)의 경우 포토레지스트의 높이가 그림.4(a)에 비해 ~25nm 정도 낮은 것으로 볼 때, 과도 현상 및 약간의 리플로우가 나타났을 가능성이 크다. 그림. 4(d)에서는 ~970nm의 홀 크기가 나타나서 본 연구에서 목표로 하는 나노 홀 크기에 가장 가까워짐을 확인할 수 있었다. 따라서, $170^{\circ}C$ 이상의 온도와 2분 이상의 리플로우 시간 조건에서 선택 영역 성장을 위한 나노 홀 마스크의 크기를 제어할 수 있음을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.