• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.63-63
• /
• 2010

Ability to transport extracted carriers from NQDs is essential for the development of most NQD based applications. Strategies to facilitate carrier transport while preserving NQDs' optical characteristics include: 1) Fabricating neat films of NQDs with modified surfaces either by adapting series of ligands with certain limitations or by applying physical processes such as heat annealing 2) Coupling of NQDs to one-dimensional nanostructures such as single walled carbon nanotubes (SWNTs) or various types of nanowires. NQD-nanowire hybrid nanostructures are expected to facilitate selective wavelength absorption, charge transfer to 1-D nanostructures, and efficient carrier transport. Even with the vast interests in using NQD-SWNT hybrid materials in optoelectric applications, still, no reports so far have clearly elucidated the optoelectric behavior when they were assembled on the FET mainly because the complexity involving in both components in their preparation and characterization. We have monitored the optical properties of both components (NQDs, SWNTs) from the synthesis, to the assembly, and to the device. More importantly, by using pyridine molecules as a linker to non-covalently attach NQDs to SWNTs, we were able to assemble NQDs on SWNTs with precise density control without harming their electronic structures. Furthermore, by measuring electrical signals from the fabricated aligned SWNTs-FET using dielectrophoresis (DEP), we were able to elucidate the charge transfer mechanism.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2024년도 제69차 동계학술대회논문집 32권1호
• /
• pp.307-309
• /
• 2024

세계적으로 물류 자동화 시장은 2026년까지 약 44조원으로 예상되며, 연평균 10.6%의 성장률을 기록할 것으로 예측된다. 특히 국내 시장은 2025년까지 연평균 성장률 11.5%로 1조원 이상으로 전망되고 있다. 2025년까지 물류 자동화 시장은 270억 달러로 급성장할 것으로 예상되며, 반도체 분야에서 로봇이 상품 입고, 보관, 상품 피킹, 분류, 출고 작업을 담당하는 트렌드가 강조된다. 본 논문은 반도체 물류 분야를 대상으로 작은 크기와 민첩성을 갖춘 로봇을 개발하여 작업 공간을 효율적으로 활용하고 인력을 최소화하려는 목적이다. 수직 및 수평 로봇은 효율적인 자동화 시스템을 제공하며, UI를 사용하여 AGV, 선반, 스카라 로봇을 하나의 통합 시스템으로 개발하고자 한다. 특히 코드 인식, 초음파 센서, 아두이노 MCU, 스카라 로봇, AGV 등을 활용한 로봇 시스템을 개발하여 반도체 물류 작업을 효율적으로 수행하고자 한다. 다양한 분야에서 활용 가능한 스카라 로봇을 개발하기 위해 마이크로 스텝과 풀리, 타이밍 벨트를 이용한 구동 방식 등을 채택한다. 반도체 물류 센터에서의 자동화는 물류 공간의 확대와 인건비 절감을 기대할 수 있으며, 로봇 및 드론을 활용하여 인건비 절감과 효율성 향상을 통해 기업 비용 절감에 기여할 것으로 예상된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권4호
• /
• pp.368-377
• /
• 2013

대형디젤기관 배기가스 저감용 Urea-SCR 시스템은 높은 NOx 저감율을 보이는 반면, 높은 관통도를 갖는 요소수가 벽면 충돌 후 증발하지 못하고 벽면에 머물게 되어 우레아염을 형성한다. 우레아염 생성 방지를 위한 방안으로 벽면유동 형성을 촉진하기위한 믹서-하우징 조립체의 형상 최적화와 관련된 실험적 연구가 수행되었다. 하우징 경사각 변화 및 믹서 설치위치에 따라 벽면유동의 증가 가능성이 hot-wire 시스템을 이용하여 조사되었다. 벽면 유동은 하우징 경사각 및 믹서 설치 위치에 큰 영향을 받으며, 하우징 경사각이 있고 믹서가 하우징 후단에 설치될 때 벽면유동이 향상되는 것을 알 수 있었다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.141-141
• /
• 2017

The ubiquitin-proteasome pathway is the major regulatory mechanism in a number of cellular processes for selective degradation of proteins and involves three steps: (1) ATP dependent activation of ubiquitin by E1 enzyme, (2) transfer of activated ubiquitin to E2 and (3) transfer of ubiquitin to the protein to be degraded by E3 complex. F-box proteins are subunit of SCF complex and involved in specificity for a target substrate to be degraded. F-box proteins regulate many important biological processes such as embryogenesis, floral development, plant growth and development, biotic and abiotic stress, hormonal responses and senescence. However, little is known about the F-box genes in wheat. The draft genome sequence of wheat (IWGSC Reference Sequence v1.0 assembly) used to analysis a genome-wide survey of the F-box gene family in wheat. The Hidden Markov Model (HMM) profiles of F-box (PF00646), F-box-like (PF12937), F-box-like 2 (PF13013), FBA (PF04300), FBA_1 (PF07734), FBA_2 (PF07735), FBA_3 (PF08268) and FBD (PF08387) domains were downloaded from Pfam database were searched against IWGSC Reference Sequence v1.0 assembly. RNA-seq paired-end libraries from different stages of wheat, such as stages of seedling, tillering, booting, day after flowering (DAF) 1, DAF 10, DAF 20, and DAF 30 were conducted and sequenced by Illumina HiSeq2000 for expression analysis of F-box protein genes. Basic analysis including Hisat, HTseq, DEseq, gene ontology analysis and KEGG mapping were conducted for differentially expressed gene analysis and their annotation mappings of DEGs from various stages. About 950 F-box domain proteins identified by Pfam were mapped to wheat reference genome sequence by blastX (e-value < 0.05). Among them, more than 140 putative F-box protein genes were selected by fold changes cut-offs of > 2, significance p-value < 0.01, and FDR<0.01. Expression profiling of selected F-box protein genes were shown by heatmap analysis, and average linkage and squared Euclidean distance of putative 144 F-box protein genes by expression patterns were calculated for clustering analysis. This work may provide valuable and basic information for further investigation of protein degradation mechanism by ubiquitin proteasome system using F-box proteins during wheat development stages.

• 한국재료학회지
• /
• 제18권12호
• /
• pp.664-668
• /
• 2008

Vapor phase polymerization of a conductive polymer on a $SiO_2$ surface can offer an easy and convenient means to depositing pure and conductive polymer thin films. However, the vapor phase deposition is generally associated with very poor adhesion as well as difficulty when patterning the polymer thin film onto an oxide dielectric substrate. For a significant improvement of the patternability and adhesion of Poly(3-hexylthiophene) (P3HT) thin film to a $SiO_2$ surface, the substrate was pre-patterned with n-octadecyltrichlorosilane (OTS) molecules using a ${\mu}$-contact printing method. The negative patterns were then backfilled with each of three amino-functionalized silane self-assembled monolayers (SAMs) of (3-aminopropyl) trimethoxysilane (APS), N-(2-aminoethyl)-aminopropyltrimethoxysilane (EDA), and (3- trimethoxysilylpropyl)diethylenetriamine (DET). The quality and electrical properties of the patterned P3HT thin films were investigated with optical and atomic force microscopy and a four-point probe. The results exhibited excellent selective deposition and significantly improved adhesion of P3HT films to a $SiO_2$ surface. In addition, the conductivity of polymeric thin films was relatively high (${\sim}13.51\;S/cm$).

• 청정기술
• /
• 제11권2호
• /
• pp.69-74
• /
• 2005

본 연구에서는 AFM 양극산화법을 이용하여 서브마이크로 수준의 패턴을 구성하였다. 자기조립법으로 제조한 MPTMS/Si(100) 기질 위에 AFM 양극산화법으로 패턴을 형성하였고, 비에칭법을 이용하여 아민그룹을 지닌 기능기를 고정시켰다. 금속전극으로는 Frens 방법으로 제조한 금나노입자를 이용하였다. 금속이온의 흡착에 따른 전도도는 근거리의 경우 coherent tunneling에 의존하지만, 원거리 전극에서는 incoherent tunneling에 의존한다. 전극의 간격이 가까울수록 저항이 감소하여 센서의 감도와 최소검출능을 개선할 수 있었다. 또한 다중기능성을 부여하여 센서의 선택도를 부여하였으며, 패턴의 크기에 따른 최소검출농도를 낮출 수 있음을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.713-717
• /
• 2006

$S_2O$-donor macrocyclic isomers incorporating a xylyl group in o- ($L^1$), m- ($L^2$) and p-positions ($L^3$) extract no metal ions except silver(I) from aqueous to chloroform phase. And the magnitudes of %Ex for silver(I) are in the order of $L^1$ > $L^2$ > $L^3$. Taking this result into account, $L^1$-$L^3$ were utilized as membrane active components to prepare potentiometric silver(I)-selective electrodes. The proposed macrocycles-based electrodes E1 ($L^1$), E2 ($L^2$) and E3 ($L^3$) exhibited comparable results which show considerable selectivity toward silver(I) over alkali, alkali earth and other transition metal ions. Comparative NMR study on $L^1$-$L^3$ and their complexes with silver(I) in solution was also accomplished. In addition, a unique sandwich-type complex $[Ag(L^1)_2]CIO_4$ was prepared from the assembly reaction of $L^1$ with $AgClO_4$ and structurally characterized by an X-ray diffraction analysis.

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2121-2133
• /
• 1997

A finite element code is developed for 3-D self-contact problems, using continuum elements with a SRI(Selective Reduced Integration) scheme to prevent locking phenomenon by the incompressibility of rubber. Contact treatment is carried out in two ways : using the displacement constraints in case of rigid contact ; and imposing the same contact forces on two contact boundaries in case of self-contact. The finite element code developed is applied to the deformation analysis of C.V.joint boots which maintain lubrication conditions and protect the C.V.joint assembly from impact and dust. The boot accompanies large rotation depending on the rotation of the wheel axis and leading to the self-contact phenomena of the boot bellows. Since this contact phenomenon causes wear of the product and has great influence on the endurance life of the product, it is indispensable to carry out stress analysis of the rubber boots. In case of self-contact, various methods for determining contact forces have been suggested with an appropriate contact formulation. Especially, the types of penetration in self-contact are modularized to accelerate conputation with a contact algorithm.

• Current Photovoltaic Research
• /
• 제1권1호
• /
• pp.17-26
• /
• 2013

In contrast to conventional crystalline cells, back-contact solar cells feature high efficiencies, simpler module assembly, and better aesthetics. The highest commercialized cell and module efficiency was recorded by n-type back-contact solar cells. However, the mainstream PV industry uses a p-type substrate instead of n-type due to the high costs and complexity of the manufacturing processes in the case of the latter. P-type back-contact solar cells such as metal wrap-through and emitter wrap-through, which are inexpensive and compatible with the current PV industry, have consequently been developed. In this paper the characteristics of EWT (emitter wrap-through) solar cells and their status and prospects for development are discussed.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.686-691
• /
• 2008

산화아연은 광학적/전기적 특성 때문에 많이 연구되고 있는 재료이지만 산, 염기분위기에 약하기 때문에 양극 산화법을 이용하여 제조하기 힘들며, 현재 보고 되어 지고 있는 연구결과 역시도 많지 않다. 본 논문에서는 일반적인 전해질인 수용액이 아닌 에탄올과 $H_2SO_4$의 혼합용액을 사용하여 양극산화 하였으며 수용액에서 제조된 ZnO와는 다른 자기 정렬된 줄무늬의 육각판상구조를 가진 ZnO를 제조할 수 있었다. 이는 $H_2SO_4$를 함유한 에탄올용액에서 $H_2SO_4$에 미량 포함된 $H_2O$가 ZnO의 선택적인 용해를 함으로서 자기 정렬된 구조를 만드는데 기인한다. $H_2SO_4$의 농도, 인가전압, 양극산화 시간, 물 첨가 등에 따른 영향 및 자기 정렬된 줄무늬의 육각판상구조를 생성하는 메커니즘을 다루었다.