• 제목/요약/키워드: Selection rule

Search Result 353, Processing Time 0.021 seconds

Vibronically Induced Two-Photon Transitions in Benzene

  • Chung, Gyu-Sung;Lee, Duck-Kwan
    • Bulletin of the Korean Chemical Society
    • /
    • v.10 no.3
    • /
    • pp.298-302
    • /
    • 1989
  • The strengths of two-photon transitions from the ground state to excited vibronic states in benzene are calculated by using the CNDO/2-U wave functions. The role of vibronic coupling in two-photon absorption process is discussed. The $A_{1{\bar{g}}}-A_{2g}^+$ two-photon transitions, which are forbidden by the identity-forbidden selection rule in single frequency two-photon absorption, are too weak to be experimentally observed even when two photons of different energies are used. It is because the transitions are forbidden also by the pseudo-parity selection rule which are applicable for alternant hydrocarbons such as benzene. It is also shown that the vibronic coupling is not very effective in altering the pseudo-parity property of the electronic state. The strength of the vibronically induced two-photon absorption is strongly affected by the presence of an electronic state from which two-photon absorption can borrow the intensity. It is pointed out that the pseudo-parity selection rule may be violated in such cases.

A Study on Rule Schemas of User Interface in HCI Devices (HCI 장치의 사용자 인터페이스 규칙스키마에 관한 연구)

  • Kim, Heung-Kyu
    • Journal of the Korea Society of Computer and Information
    • /
    • v.18 no.1
    • /
    • pp.83-91
    • /
    • 2013
  • As humans perform many tasks using computers, HCI(Human-Computer Interaction) has received much attention these days. One objective of HCI research is to propose how to design more consistent systems. In order to evaluate the consistency of HCI devices from the user's perspective, several models such as TAG(Task Action Grammar), GOMS(Goals-Operators-Methods-Selection Rule), and GTN(General Transition Network) have been developed. TAG specifies actions to perform tasks in terms of rule schema. It has been verified that the less the number of rule schema is, the better users perform the tasks due to assumably higher consistency. This paper hypothesizes that the consistency of systems depends not only on the number of rule schema but also on the distances between rule schema. That is, the closer the rule schema are, the easier it is to acquire the whole set of rule schema. An experiment supported this hypothesis. Therefore, distances between rule schema should be considered as well as the number of rule schema when designing systems.

Noise Reduction Method for Image Using Transition-Parameter of Cellular Automata (셀룰러 오토마타의 천이 파라미터를 이용한 영상의 잡음제거 방법)

  • Kim, Tai-Suk;Lee, Seok-Ki;Kwon, Soon-Kak;Kwon, Oh-Jun
    • Journal of Korea Multimedia Society
    • /
    • v.13 no.9
    • /
    • pp.1329-1336
    • /
    • 2010
  • Cellular Automata is a discrete dynamical system which natural phenomena may be specified completely in terms of local relation, can increase and decrease the difference of luminance locally according to transition rule by keeping the characteristic of target image. In this paper, we propose a noise reduction method by keeping the characteristic using transition rule of Cellular Automata, also we propose methods of effective transition rule, the selection of parameters, the selection of number of neighborhood pixels. For uniform distribution noise, Gaussian noise, impulse noise, we do an experiment on adaptive state using different mathematical operations and compare its results. It was confirmed that the proposed transition rule is based on fast convergence speed and has stabile results.

A Multi-Phase Decision Making Model for Supplier Selection Under Supply Risks (공급 리스크를 고려한 공급자 선정의 다단계 의사결정 모형)

  • Yoo, Jun-Su;Park, Yang-Byung
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.40 no.4
    • /
    • pp.112-119
    • /
    • 2017
  • Selecting suppliers in the global supply chain is the very difficult and complicated decision making problem particularly due to the various types of supply risk in addition to the uncertain performance of the potential suppliers. This paper proposes a multi-phase decision making model for supplier selection under supply risks in global supply chains. In the first phase, the model suggests supplier selection solutions suitable to a given condition of decision making using a rule-based expert system. The expert system consists of a knowledge base of supplier selection solutions and an "if-then" rule-based inference engine. The knowledge base contains information about options and their consistency for seven characteristics of 20 supplier selection solutions chosen from articles published in SCIE journals since 2010. In the second phase, the model computes the potential suppliers' general performance indices using a technique for order preference by similarity to ideal solution (TOPSIS) based on their scores obtained by applying the suggested solutions. In the third phase, the model computes their risk indices using a TOPSIS based on their historical and predicted scores obtained by applying a risk evaluation algorithm. The evaluation algorithm deals with seven types of supply risk that significantly affect supplier's performance and eventually influence buyer's production plan. In the fourth phase, the model selects Pareto optimal suppliers based on their general performance and risk indices. An example demonstrates the implementation of the proposed model. The proposed model provides supply chain managers with a practical tool to effectively select best suppliers while considering supply risks as well as the general performance.

Regression Trees with. Unbiased Variable Selection (변수선택 편향이 없는 회귀나무를 만들기 위한 알고리즘)

  • 김진흠;김민호
    • The Korean Journal of Applied Statistics
    • /
    • v.17 no.3
    • /
    • pp.459-473
    • /
    • 2004
  • It has well known that an exhaustive search algorithm suggested by Breiman et. a1.(1984) has a trend to select the variable having relatively many possible splits as an splitting rule. We propose an algorithm to overcome this variable selection bias problem and then construct unbiased regression trees based on the algorithm. The proposed algorithm runs two steps of selecting a split variable and determining a split rule for binary split based on the split variable. Simulation studies were performed to compare the proposed algorithm with Breiman et a1.(1984)'s CART(Classification and Regression Tree) in terms of degree of variable selection bias, variable selection power, and MSE(Mean Squared Error). Also, we illustrate the proposed algorithm with real data sets.

Prediction of User's Preference by using Fuzzy Rule & RDB Inference: A Cosmetic Brand Selection

  • Kim, Jin-Sung
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • v.5 no.4
    • /
    • pp.353-359
    • /
    • 2005
  • In this research, we propose a Unified Fuzzy rule-based knowledge Inference Systems (UFIS) to help the expert in cosmetic brand detection. Users' preferred cosmetic product detection is very important in the level of CRM. To this purpose, many corporations trying to develop an efficient data mining tool. In this study, we develop a prototype fuzzy rule detection and inference system. The framework used in this development is mainly based on two different mechanisms such as fuzzy rule extraction and RDB (Relational DB)-based fuzzy rule inference. First, fuzzy clustering and fuzzy rule extraction deal with the presence of the knowledge in data base and its value is presented with a value between 0 -1. Second, RDB and SQL (Structured Query Language)-based fuzzy rule inference mechanism provide more flexibility in knowledge management than conventional non-fuzzy value-based KMS (Knowledge Management Systems).

Expert System for Intelligent Control-Based Job Scheduling in FMS (FMS 에서의 지능제어형 생산계획을 위한 전문가 시스템)

  • 정현호;이창훈;서기성;우광방
    • The Transactions of the Korean Institute of Electrical Engineers
    • /
    • v.39 no.5
    • /
    • pp.527-537
    • /
    • 1990
  • This paper describes an intelligent control-based job scheduler, named ESIJOBS, for flexible manufacturing system. In order to construct rulebase of this system, traditional rules of job scheduling in FMS are examined and evaluated. This result and the repetitional simulations with graphic monitoring system are used to form the rulebase of ESIJOBS, which is composed of three parts:six part selection rules, four machine center selection rules, and twenty-one metarules. Appropriate scheduling rule sets are selected by this rulebase and manufacturing system status. The performances of all simulations are affected by random breakdowns of major FMS components during each simulation. Six criteria are used to evaluate the performance of each scheduling. The two modes of ESIJOBS are simulated and compared with combinational 24 rule-set simulations. In this comparison ESIJOBS dominated the other rule-set simulations and showed the most excellent performance particularly in three criteria.

Agent Based Object Oriented Software Test Technique (에이전트 기반의 객체지향 소프트웨어 테스트 방안)

  • Choe, Jeong-Eun;Choe, Byeong-Ju
    • Journal of KIISE:Software and Applications
    • /
    • v.27 no.11
    • /
    • pp.1106-1114
    • /
    • 2000
  • 컴퓨터 분야에서 에이전트의 개념은 전자 상거래, 정보 검색과 같은 많은 어플리케이션들에 응용되어 중요 시 되고 있다. 하지만, 아직까지 지능성을 가진 테스트 도구는 없었다. 이 논문에서 제안하는 테스트 에이전트 시스템은 에이전트의 특성을 가지고 테스터를 도와주는 테스트 도구이다. 테스트 에이전트 시스템은 객체지향 테스트 프로세스를 따라 테스터의 일을 대행해 주고, 테스터의 간섭을 최소화 시켜 준다. 이 시스템은 자동 생성된 많은 양의 테스트케이스에서 중복이 없고 일관성 있는 테스트케이스를 지능적으로 선택하여 테스트 시간을 단축시켜 준다. 테스트 에이전트 시스템은 3개의 에이전트 User Interface Agent, Test Case Selection & Testing Agent, Regression Test Agent로 구성된다. 특히 Test Case Selection & Testing Agent은 RE-Rule과 CTS-Rule을 통하여 중복이 없고 일관성 있는 테스트케이스를 지능적으로 선택하며, Regression Test Agent는 RRTIS-Rule을 통해 리그래션 테스트 항목을 지능적으로 선택한다.

  • PDF

A Study on the Transfer Point Selection Rule for Tandem AGV Systems (Tandem AGV System의 Transfer Point 결정 Rule의 수행도 평가에 관한 연구)

  • 정병도
    • Proceedings of the Korea Society for Simulation Conference
    • /
    • 1998.10a
    • /
    • pp.209-212
    • /
    • 1998
  • Tandem AGV 시스템은 기존의 AGV 시스템의 운영 문제를 쉽게 해결하기 위해 새롭게 제시된 개념의 시스템이다. 이와 같은 Tandem AGV 시스템의 성능은 설계적, 운영적 영향을 받게 된다. 본 연구에서는 Tandem AGV 시스템의 설계적 요소 중 한 부분인 Transfer Station의 위치를 결정하기 위한 알고리즘을 제시하였다. 그리고 시뮬레이션을 통해 그 성능을 평가하였다.

  • PDF

Single Relay Selection for Bidirectional Cooperative Networks with Physical-Layer Network Coding

  • Liu, Yingting;Zhang, Hailin;Hui, Leifang;Liu, Quanyang;Lu, Xiaofeng
    • ETRI Journal
    • /
    • v.34 no.1
    • /
    • pp.102-105
    • /
    • 2012
  • To serve the growing demand of the bidirectional information exchange, we propose a single relay selection (RS) scheme for physical-layer network coding (PNC) in a bidirectional cooperative network consisting of two sources and multiple relays. This RS scheme selects a single best relay by maximizing the bottleneck of the capacity region of both information flows in the bidirectional network. We show that the proposed RS rule minimizes the outage probability and that it can be used as a performance benchmark for any RS rules with PNC. We derive a closed-form exact expression of the outage probability for the proposed RS rule and show that it achieves full diversity gain. Finally, numerical results demonstrate the validity of our analysis.