• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.891-892
• /
• 2016

Recent research has become a smart home for operating the joining operation of the relationships between the device progress. However, Existing systems, there is a problem that the efficiency of the work can be degrade by the interference occurs when the operation of the other device, and triggered if the device is operating. In this paper, we designed a priority automatically set algorithm according to a user selection device to solve this problem. The user selects the device used by the application and by comparing between devices, select whether or not to set the priority of the tasks in. This allows the user can configure the working environment of only the desired device, and less chance of interference from other devices that are not selected during the work in progress can expect a more efficient productivity.

• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.471-484
• /
• 2010

In the wireless communication systems, the power consumption of a mobile device is very important issue due to its battery limitations. Hence most of the standards for wireless networks including a mobile WiMAX system are supporting their own power saving mode in way that a mobile device is able to reduce its energy usage while in the mode. However, those standards just define the arrangement of special time intervals, called a paging listening interval, during which the device needs to receive the paging-related control messages, and they do not specify how to effectively reduce the power in many different network environments. This means the amount of power spent by the device is very dependent on the implementations of individual device-vendors, and undesirable paging loss may happen according to the channel conditions. To reduce unnecessary power usage and the risk of paging loss, this paper proposes the effective frequency/BS selection algorithm applicable to a mobile device operating in the power saving mode, which serves the device with better BS based on the tracking for channel variation. This algorithm consists of the channel estimation phase during each paging listening interval, the tracking phase for the measured results, the frequency reselection phase based on the tracking activity, and the preferred BS reselection phase. Thus the proposed method can improve the paging performance while the device is moving in the network. Also the simulation result shows that the presented scheme is superior to other candidates in energy efficiency due to the channel-adaptive frequency/BS selection.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.67-72
• /
• 2005

If the PNC is shutting down or wants to leave the WPAN, it uses the handover process to give control to another device in the piconet. However when the PNC is selected, only the device capability information is checked in the WPAN standard specification and no detail criteria is described. In this paper, the PNC selection method with considering the number and density of device to maximize the piconet data throughput in the WPAN is studied. From the numerical analysis results, the considering with the devices concentration has higher data throughput compared with the uniform distribution. For the efficient performance, the device distribution within the piconet should be considered in the PNC selection.

• The KIPS Transactions:PartD
• /
• v.19D no.1
• /
• pp.121-126
• /
• 2012

The study aims to identify and classify the decision factors in selecting a device, to measure buyers' perception for the factors at the point of smart phone purchase, and finally to propose the business strategies based on those purchase pattern changes. The research performs to not only investigate the decision factors through literature reviews, but also draw the device selection factors directly from buyers. The findings illustrated how the perceptions between the first buyers and existing buyers have been changes. The analyses will practically contribute as the references when the business strategy and policy are planned by smart phone related companies and the government.

• Journal of Information Technology Services
• /
• v.11 no.4
• /
• pp.181-194
• /
• 2012

The one of the most meaningful change in the recent ubiquitous environment is the omnipresence of public digital display device for providing ubiquitous information. It is the important issue to provide publicity as well as adaptive information to each user in the field of the public digital display device. This research proposes the idea ensuring fast response speed by the selection of user preference function. The preference function is selected by statistics using Zipf distribution in the system comprising mobile device and digital display device based on NFC (Near Field Communication). The idea is proved by CPM-GOMS model and the improvement of user response can be achieved.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.3
• /
• pp.312-320
• /
• 2015

The 1/5 scale-down model of the Bycatch Reduction Device (BRD) from an Argentinean demersal trawl was tested in a circulating water channel. The BRD is designed to help small Hake (merluza, merluccius hubbsi) to escape from a trawl. It is settled in front of a trawl codend, and is equipped with selection grids that help small fish to escape from the gear and guiding panels that help fish to meet with the grids. Bars of the grids are wires covered by the PVC and other parts of the BRD are made of net. When the velocity was less than 0.65 m/sec (2.81 Kont when translated to real towing speed) which is slow speed compared with real towing speed, position between an upper guiding panel and an upper selection grid were good to help small fish to escape. When the velocity was more than 0.8 m/sec (3.41 Knot when translated to real towing speed) which is similar to and faster than real towing speed, it was considered that small fish may have difficulties in escaping because the gap was not enough between an upper guiding panel and an upper selection grid. The lower selection grid was sat on the bottom of the tank without an angle due to the weight that it carries. Improvements were proposed to position the panels and the grids better.

• Journal of the Korean Institute of Gas
• /
• v.13 no.1
• /
• pp.52-60
• /
• 2009

This study reflects the concept of risk-based design to present a systematic design means and a method to adjust regulations and standards towards a more reliable direction within the current law. In order to enhance the early design concentration and level in the part of safety design, a new Advanced Safety Analysis Table (ASAT) was developed to provide information on the systematized safety design element from the early design phase. Furthermore, a guideline was put forth about the selection of a safety device according to process trouble, on the basis of the ASAT. To apply the proposed ASAT and the selection method of a safety device according to process troubles, the ASAT was executed for the PGC (Process Gas Compressor) of the NCC (Naphtha Cracking Center), and the result of selecting the safety device was analyzed according to process trouble.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5253-5270
• /
• 2016

With device-to-device (D2D) communications, an inactive user terminal can be utilized as a relay node to support multi-hop communication so that connective experience of the cell-edge user as well as the capacity of the whole system can be significantly improved. In this paper, we investigate the spectrum sharing for a cooperative relay assisted D2D communication underlying a cellular network. We formulate a joint relay selection and channel assignment problem to maximize the throughput of the system while guaranteeing the quality of service (QoS) requirements of cellular users (CUs) and D2D users (DUs). By exploiting coalition formation game theory, we propose two algorithms to solve the problem. The first algorithm is designed based on merge and split rules while the second one is developed based on single user's movement. Both of them are proved to be stable and convergent. Simulation results are presented to show the effectiveness of the proposed algorithms.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.28-33
• /
• 2015

Three phase heaters in 7 buildings of 2 sites were examined for precise diagnosis. The sample size was 626. Precise examinations of current and the heater wiring status revealed contact failures and arcs in equipments that had CUF larger than 10%. Contact failures and arcs may cause electrical fire. Therefore, the correlation between the CUF and the imperfections in heater equipment and its wiring was analyzed for three phase heaters. In addition, the protection devices used for detection of heater imperfections were found to be unsuitable for the purpose. Current status of the protection devices was analyzed, and suggestions for improvements were made for new standards of the protection device selection.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.94-104
• /
• 1997

Most color imaging devices often exhibit color distortions due to the differences in realizable color gamuts and nonlinear characteristics of their components. In order to minimize color differences, it is desirable to apply color correction techniques. Th efirst step of color correction is to select the subset of the color coordinates representing the input color space. Th eselected subset serves as so called color samples to model the color distortion of a given color imaging device. The effectiveness of color correction is determined by the color sampels utilized in the modeling as well as the applied color correction technique. This paper presents a new selection method for color samples based on gentic algorithm. In the proposed method, structure of strings are designed so that the selected color samples fully represent the characteristics of color imaging device and consist of distinct color coordinates. To evaluate the performance of the selected color samples, they ar etuilized for three different color correction experiments. The experimentsal results are comapred with the crresponding results obtianed with the equally spaced color samples.