• Journal of Communications and Networks
• /
• 제9권1호
• /
• pp.67-74
• /
• 2007

The performance of dual diversity receivers operating over correlated Ricean fading channels is analyzed. Using a previously derived rapidly converging infinite series representation for the bivariate Ricean probability density function, analytical expressions for the statistics of dual-branch selection combining, maximal-ratio combining, and equal-gain combining output signal-to-noise ratio (SNR) are derived. These expressions are employed to obtain novel analytical formulae for the average output SNR, amount of fading, average bit error probability, and outage probability. The proposed mathematical analysis is used to study various novel performance evaluation results with parameters of interest the fading severity, average input SNRs, and the correlation coefficient. The series convergence rate is also examined verifying the fast convergence of the analytical expressions. The accuracy of most of the theoretical performance evaluation results are validated by means of computer simulations.

• 한국지능시스템학회논문지
• /
• 제22권1호
• /
• pp.108-113
• /
• 2012

무선 센서 네트워크에서 라우팅 경로는 네트워크 보안 유지를 위해 매우 중요하다. 이러한 라우팅 경로를 유지하기 위해선 지속적인 경로 재설정 및 관리가 요구된다. 영역 분할 기반 경로 설정 기법은 통계적 여과 기법이 적용된 센서 네트워크를 여러 개의 하위 영역으로 나누고 각 영역별로 경로 설정 및 관리하는 방법을 제공한다. 이 기법은 부분적인 네트워크 위상 변화 또는 노드의 에너지 고갈 등의 문제로 인한 경로 재설정 시 사용되는 에너지 소모를 많은 부분 절약할 수 있다. 하지만 경로 설정에 사용되는 정보가 해당 영역에만 제한되어 전체 네트워크 관점에서 항상 최적화된 보안 라우팅 경로를 보장하기 어렵다. 본 논문에서는 통계적 여과 기법 기반 센서 네트워크에서 기존 영역 분할 기반 경로 설정 기법으로 설정된 라우팅 경로 최적화를 위한 영역별 부분 경로 선택 방법을 제안한다. 제안 기법에서는 기지 노드가 영역 단위로 설정된 부분 경로 정보를 수집하여 모든 후보 경로들을 평가 함수를 이용해 평가한다. 평가를 통해 결정된 보안 라우팅 경로 정보는 전체 경로 정보 메시지를 통해 각 영역의 최상위 노드(Super DN)에 전달된다. 따라서 각 영역의 최상위 노드는 해당 경로 정보를 이용해 이벤트 발생 위치에 따른 최적화된 라우팅 경로를 제공할 수 있다. 시뮬레이션을 통해 제안 기법의 성능을 검증하였으며, 제안 기법은 기존 영역 분할 기반 경로 설정 기법의 성능 향상을 위해 유용하게 활용할 수 있을 것으로 기대된다.

• 한국유체기계학회 논문집
• /
• 제10권3호
• /
• pp.33-38
• /
• 2007

Fan selection procedure and fan noise evaluation method are presented for the system electronic cooling by combining FNM(Flow Network Model) and fan noise correlation model. Internal flow paths and distribution in electronic system we analyzed by using the FNM with the flow resistances for flow elements of the system. Based on the fan operation point predicted from the FNM analysis results, the present fan noise model predicts overall sound power, pressure levels and spectrum. The predictions of the flow distribution, the fan operation and the noise level in electronic system by the present method are well agreed with 3-D CFD and actual test results.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.830-836
• /
• 2007

This paper is concerned with identifying the importance of the pre-qualification factors used in selecting contractors and also in determining the importance of various criteria used for the award of contract. The study was carried out through questionnaire survey administered to a population of 60 respondents in consultancy and client's organisation. The data analysis included a statistical comparison of means and interpretation. The result of this study showed that experience of the contractor is the most important prequalification factor while technical expertise is the most important criteria in the award of contract. The result of this study will enable clients, consultants and contractors to lay emphasis on the influencing factors in terms of pre-qualification and award of contract.

• 대한인간공학회지
• /
• 제31권3호
• /
• pp.437-444
• /
• 2012

The purpose of this study was to suggest appropriate human model for ergonomic evaluation considering working postures on 3D space. Background: Traditionally extreme design rules have been widely utilized at the stage of designing products. Body size of 5th percentile and 95th percentile in stature has been generally selected for controllability and clearance evaluation, respectively. However, these rules had limitations in reflecting working posture in ergonomic evaluation. Method: In order to define working posture on 3D space, not only sagittal plane but also lateral plane was considered. Kinematic linkage body model was utilized for representation of working posture. By utilizing the anthropometric data of 2,836 South Korean male populations, the point cloud for end points of linkage models was derived. The individuals who were lacking in certain controllability were selected as human models for the evaluation. Result: In case of standing posture it was found that conventional approach is proper for all controllability evaluations. Contrary to standing posture, tall people had less controllability on control location below shoulder point in sitting posture. Conclusion: From the derived proper range on controllability, ergonomic evaluation rule was suggested according to working posture especially in standing and sitting. Application: The results of the study are expected to aid in selection of appropriate human model for ergonomic evaluation and to improve the usability of products and work space.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.37-40
• /
• 2001

This paper describes the selection and evaluation of RP processes. Major rapid prototyping processes such as SLS, SLA, FDM and LOM, which are wide spread in use are selected. A test part, which includes various primitives, is designed in order to evaluate these RP processes. Measurement of the test part is automated by using a CMN program. To visualize and analyze measured data, Microsoft Access and Visual C++ are used. Also, from measured data obtained, TOPSIS, one of the decision making methods, and Shannon Entropy is used to select an appropriate RP process for specific application.

• 경영과학
• /
• 제18권2호
• /
• pp.73-85
• /
• 2001

Recently increasing amount of efforts has been devoted to the improvement of logistics in the marine products industry. Yet, few studios have been conducted on the development of site selection models of marine products centers. This paper Proposes a systematic assessment model for the decision making, which is composed of a set of evaluation criteria and an appropriate evaluation method. In choosing criteria we consider completeness and comprehensiveness to reach a right solution. For more flexibility of the model in the future, this study proposes two sets of criteria according to the size of planned centers. The Analytic Hierarchy Process (AHP) is adopted in this study, since the criteria incorporate both subjective factors and objective factors and the AHP is known effective in the situation. This study then illustrates the model application with plausible alternatives. Finally, a dependency problem in the decision criteria is discussed and the Analytic Network Process (ANP) is recommended, in the context, as e solution method.

• 한국컴퓨터정보학회논문지
• /
• 제4권4호
• /
• pp.226-235
• /
• 1999

본 연구에서는 전자상거래시스템 공급자의 평가와 선정을 위한 모형을 구축하였다. 기업의 의사결정과 정은 여러 상충하는 목적들을 동시에 고려하는 경우가 대부분이기 때문에 이러한 상황에 적합한 다목표 지향적인 수리모형 구축의 필요성이 제시되었다. 또한 제공되는 데이터의 불명확성과 여러 목적들을 동시에 고려할 경우 발생할 수 있는 의사결정자의 열망수준과 그 만족정도를 반영하기 위해 본 연구에서는 3유형의 다목적계획모형을 제시하였다. 최소연산자 모형, 가중치 다목적계획모형 및 선제우선순위 다목적계획모형의 구축 후. 가상기업에 대한 설례를 통해 그 적용가능성을 알아보았다.

• 한국지리정보학회지
• /
• 제22권4호
• /
• pp.102-115
• /
• 2019

본 연구에서는 가뭄과 연관되는 다양한 관련 요인을 포함한 가뭄취약성 평가방안을 수립하고 이를 적용하는 것을 목표로 하였다. 평가기법은 평가인자와 가중치 선정, 평가자료 데이터베이스 구축, 평가자료와 가중치를 조합한 평가의 세 단계로 구성되었으며 평가인자 및 가중치 선정에는 Delphi 조사기법을 적용하고 평가기법으로는 최근 널리 적용되고 있는 MCDM(Multi-Criteria Decision Making) 방법인 TOPSIS(Technique for Order of Preference by Similarity to Ideal Solution) 기법을 활용하였다. 수립한 가뭄취약성 평가방안을 2016년 3월부터 2019년 9월까지 우리나라 시군구 행정구역을 대상으로 적용하여 결과를 제시하였다. 평가 결과, 충청북도, 경상남도, 전라남도에 가뭄 취약지역이 다수 도출 되어 이들 지역에 대한 가뭄 대응 방안 수립이 필요한 것으로 분석되었다.

• 한국산업정보학회논문지
• /
• 제2권2호
• /
• pp.159-179
• /
• 1997

Traditionally, the evaluation and selection of suppliers have been a major purchasing function. A growing concern for just in-time purchasing, global sourcing, and long-term partnership between buyers and suppliers makes selecting a righ supplier become more critical decision making process. Consequently, a rigorous and systematic method for evaluation suppliers is a must. However, assessing the values of factors(e.g. qulaity , delivery, and service) selected for evaluating suppliers contains elements of uncertainty. Although several methods have been developed for uncertainty analysis, they may not be proper tools for evaluating suppliers under uncertainty. In this paper, a methodology using a fuzzy-set approach in combination with a multicriterion decision-making (MCDM) technique is developed to use as a tool for evaluating suppliers under uncertainty. An numerical example is presented to demonstrate the method in practice.