• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.939-942
• /
• 2004

In this study, we report simulation results of single-panel LCOS (liquid crystal on silicon). Reflective LCOS microdisplays are widely used in various projection and near-eye application. For one panel system, liquid crystal response time is an important variable. The panel must switch fast enough to support the display of Field color sequential with high field rates. In order to have fast response and good contrast, a vertical alignment (VA) cell was used in this study. With suitable selection on LC parameters like temperature, viscosity, elastic constant and birefringence, it is possible to get response time of around 2ms from a 2.0 um-thick vertical alignment cell. This result also indicates an ease of production control on 2.0 um cells than 1.0 um cells.

• Analytical Science and Technology
• /
• v.27 no.3
• /
• pp.121-139
• /
• 2014

In this review, we will discuss aptamer technologies including in vitro selection, signal transduction mechanisms, and designing aptamers and aptazyme for label-free biosensors and catalysts. Dye-displacement, a typical label-less method, is described here which allows avoiding relatively complex labeling steps and extending this application to any aptamers without specific conformational changes, in a more simple, sensitive and cost effective way. We will also describe most recent and advanced technologies of signaling aptamer and aptazyme for the various analytical and clinical applications. Quantum dot biosensor (QDB) is explained in detail covering designing and adaptations for multiplexed protein detection. Application to aptamer array utilizing self-assembled signaling aptamer DNA tile and the novel methods that can directly select smart aptamer or aptazyme experimentally and computationally will also be finally discussed, respectively.

• Journal of electromagnetic engineering and science
• /
• v.16 no.4
• /
• pp.206-209
• /
• 2016

This letter proposes a reconfigurable directional coupler that uses a variable impedance mismatch reflector to achieve high isolation characteristics in the antenna front end. The reconfigurable coupler consists of a directional coupler and a single-pole four-throw (SP4T) switch with different load impedances as a variable load mismatch reflector. Selection of the load impedance by the reflector allows cancellation of the reflected signal due to antenna load mismatch and the leakage from the input to isolation port of the directional coupler, resulting in high isolation characteristics. The performance of the proposed architecture in separating the received (Rx) signal from the transmitted (Tx) signal in the antenna front end was verified by implementing and testing the reconfigurable coupler at 917 MHz for UHF radio-frequency identification (RFID) applications. The proposed reconfigurable directional coupler showed an improvement in the isolation characteristics of more than 20 dB at the operation frequency band.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1298-1305
• /
• 2016

This paper presents the development of a short-circuit protection mechanism on a high voltage switch (HVS) board which is built by a series connection of semiconductor switches. The HVS board is able to quickly detect and limit the peak fault current before the signal board triggers off a gate signal. Voltage clamping techniques are used to safely turn off the short-circuit current and to prevent overvoltage of the series-connected switches. The selection method of the main devices and the development of the HVS board are described in detail. Experimental results have demonstrated that the HVS board is capable of withstanding a short-circuit current at a rated voltage of 10kV without a di/dt slowing down inductor. The corresponding short-circuit current is restricted to 125 A within 100 ns and can safely turn off within 120 ns.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.169-170
• /
• 2011

본 논문은 양방향 Buck 컨버터 DCM 구동 시 사용되는 스위치의 전류링잉현상을 상세히 분석하고 이에 따른 스위치 효율과 시스템 전력 효율 차이를 실험을 통해 검증한다. 분석을 통해 얻은 결과를 바탕으로 양방향 Buck 컨버터 설계 시 전력 효율을 높이는 스위치 및 다이오드를 선정하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.283-283
• /
• 2010

Smart street light controller is a product with advance micro controller base for energy saving in conventional street lighting systems. Intelligent Street light controller are specially developed for automation and energy saving in conventional street light systems and lighting systems. It is so designed that it operates on sunrise & sun set timings according to longitude of particular location with facilitate to set month wise civil twilight timings to cope up with all seasons. Dimming (Power down) mode selection switch on/off at fixed times with relay or contactor. Night dimming, staggering and intelligent control reduces burn hours and increases the lifetime of lamps with about 30% and low annual operating cost type base are among the most inexpensive wireless technologies available. Low initial costs As PLC wireless, there is no need to establish cable connection.

• Journal of electromagnetic engineering and science
• /
• v.1 no.2
• /
• pp.131-138
• /
• 2001

The DTV (Digital TV) tuner for an 8-VSB (Vestigial Side-Band) modulation was developed to meet the requirements of the ATSC (Advanced Television Systems Committee). The double frequency conversion and the active tracking filter in the front-end were used to cancel interferences between adjacent channels and multi-channels by suppressing the IF beat and the Image frequency. However, It was impossible to get frequency mapping between the tracking filter and the first VCO (Voltage Controlled Oscillator) in the existing DTV tuner structure which differs from the NTSC (National Television Systems Committee) tuner. This paper, therefore, suggests an assailable structure and a new method for the automatic frequency selection by mapping the frequency characteristics over the tracking voltage and the combined HW which is composed of a Micro-controller, an EEPROM (Electrically Erasable Programmable Read Only Memory), a DAC (Digital-to-Analog Converter), an OP amplifier, and a switch driver.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.4
• /
• pp.195-200
• /
• 2009

In this paper, we propose a new priority Optical Burst Switching (OBS) protocol based on a hop count, which can provide an efficient utilization in optical wireless networks. Under several legacy schemes, a switch drops the burst with a shorter time among ones regardless of its traversed hop count. As a result, the dropped burst that have been traversed more hops might cause to waste bandwidth than the one traversed a few hops. Noting that this problem, we propose a Just Enough Time (JET) with a hop count scheme which can reduce the wasted bandwidth by prioritizing the burst traversed more hops over others. The simulation results shows that the proposed scheme has more advantages over the legacy schemes in terms of the burst blocking probability and the link utilization.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.119-122
• /
• 2016

대표적인 네트워크 기반의 이동성 기법인 PMIPv6(Proxy Mobility IPv6)은 이동 단말에 대한 끊김 없는 서비스 지원이 가능하다. 하지만 PMIPv6 기법은 단말과 홈 에이전트 간 IP Tunnel을 생성해야 하며, 그에 따른 시그널링 비용이 발생하게 된다. 또한, 단말 이동에 따른 연속적인 서비스 지원만 고려할 뿐 이동 중 발생하는 패킷 손실은 고려하지 않는 문제점이 있다. 본 논문은 이러한 문제점을 해결하기 위해 SDN(Software Defined Networks)을 적용하였다. 데이터 플레인에서 Anchor 스위치를 선정하여 이동 전 위치의 단말로 전송되던 패킷을 이동한 위치의 단말로 Re-direction 함으로써 패킷 손실을 줄이기 위한 기법을 제안한다.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.311-318
• /
• 2018

In this paper, test-bed for the evaluation of wireless communication system on a small launch vehicle is proposed. The proposed test-bed consists of antenna test-coupler, RF attenuators, and RF switch modules. The antenna test-coupler isolates antennas for each band and transmits / receives wireless signals. The RF attenuator and switch are used for path selection of testing signal path. In design and measurement result of the antenna test-coupler, the antenna test-coupler has shielding effect higher than 39.3, 47.1, 56.1 dB at UHF-, S-, X-band. Through testing on small launch vehicle wireless communication system, we were able to successfully transmit and receive data between each test system and launch vehicle with antenna path switching.