This study measured the effect 3D printing products comprised of different materials and shapes on heat transfer in clothing to derive fundamental data on thermal comfort among clothing comfort. The variables were three types of material (EVA foam, TPU-10%, TPU-10%+EVA), two types of shape (without holes, with holes), and two types of covers(without cover, with cover). All samples (12 types) prepared by combining these variables were placed on the hot plate set at 36℃, and the surface temperature was measured at three points for 10 minutes. The surface temperature change was dependent on the material, shape, and cover of the sample. The sample printed with TPU exhibited higher temperature transfer compared to the EVA foam sample after 10 mins. In addition, the temperature transfer was better when there were holes, and rate decreased when the sample was covered with fabric. We confirmed that material selection of the pad and thermal conductivity of the cover are extremely important in solving thermal stress to the human body caused by functional clothing with protectors. Additionally, as the protector, it is recommended to design the outer shell with a passage, such as a hole, to allow the rapid transfer of heat to the external environment.
Objectives The purpose of this study is to investigate therapeutic exercise and to provide the evidence of daoyin exercise for shoulder pain. Methods Electronic databases including PubMed, EMBASE, China National Knowledge Infrastructure, Science ON, Oriental Medicine Advanced Searching Integrated System were searched up to October 2022. We selected randomized controlled trials. The quality of studies was assessed by Cochrane risk of bias tool. Meta-analysis were perfomed by Review Manager software. Results Eighteen randomized controlled trials were collected in accordance with the selection and exclusion criteria. Among the 18 trials, 7 trials used strengthening exercise, 4 trials used stablilization exercise, 5 trials used both types of intervention, and 2 trials used daoyin exercise. The study characteristics, results and method of intervention were analyzed. Meta-analysis showed that therapeutic exercise appeared to more effective than no treatment group for shoulder pain (standardized mean difference=-1.18, 95% confidence interval=-1.44 to 0.91, Z=8.82, p<0.00001; chi2=2.71, p=0.61; I2=0%). Conclusions All of 18 selected studies reported the effectiveness of therapeutic exercise for shoulder pain. Combining strengthening and stablilization exercise is considered the most efficient way for shoulder pain. Based on this study, well-designed studies should be performed to be evidence of the use of daoyin exercise for shoulder pain.
Abdul Samad;AMM Nurul Alam;Swati Kumari;Md. Jakir Hossain;Eun-Yeong Lee;Young-Hwa Hwang;Seon-Tea Joo
Food Science of Animal Resources
/
v.44
no.2
/
pp.284-298
/
2024
Restructured meat (RM) products are gaining importance as an essential component of the meat industry due to consumers' interest in health benefits. RM products imply the binding or holding of meat, meat by-products, and vegetable proteins together to form a meat product with meat's sensory and textural properties. RM products provide consumers with diversified preferences like the intake of low salt, low fat, antioxidants, and high dietary fiber in meat products. From the point of environmental sustainability, RM may aid in combining underutilized products and low-valued meat by adequately utilizing them instead of dumping them as waste material. RM processing technique might also help develop diversified and new hybrid meat products. It is crucial to have more knowledge on the quality issues, selection of binding agents, their optimum proportion, and finally, the ideal processing techniques. It is observed in this study that the most crucial feature of RM could be its healthy products with reduced fat content, which aligns with the preferences of health-conscious consumers who seek low-fat, low-salt, high-fiber options with minimal synthetic additives. This review briefly overviews RM and the factors affecting the quality and shelf life. Moreover, it discusses the recent studies on binding agents in processing RM products. Nonetheless, the recent advancements in processing and market scenarios have been summarized to better understand future research needs. The purpose of this review was to bring light to the ways of sustainable and economical food production.
We derived following result by organizing research about processing of medicinal of before Han(漢) dynesty. The human being intake of natural substance for the purpose of treatment was what happened later than the use of natural substance as food. According to the record of by the early years of Shang(商) dynasty, we can assume that we cooked food with water and fire. The reason why there is no appearance of common production that can be included under the name of 'Tang Ye(湯液)' in the medical record discovered from Ma Wang Dui(馬王堆) is because 'Tang Ye' was yet developed. However, as the presentation of format of medicine process, there was gradual formation of medicinal fluid concept. There are quite of records on major details of cloth manufacture like washing and selection, grinding, processing of medicine from the recordings of "Wu Shi Er Bing Fang(五十二病方)", "Yang Sheng Fang(養生方)", "Za Liao Fang(雜療方)" discovered at Ma Wang Dui. It used words like 'Ze(擇)', 'Qu(去)' for the selection and 'Jiu(酒)', 'Zhuo(濯)' for the wash as a process method before cloth manufacture. When filter the processed medicine, it used words like 'Zhuo(捉)', 'Suo(索)', 'Jun(浚)' and used 'Yin Gan(陰乾)', 'Bao(暴)', 'Yang(暘)' for dry. The 'cutting(切削)' that crushes the medicine used different names based on the properties of medicines. The most frequent crush is 'Ye(冶)' and it means the powered medicine after dry. There was thermal process of mild fire(微火) and heating of 'Wen(溫)'. There are many states of medicine seen from the medical record discovered at Ma Wang Dui so they can be said as original medicine. 藥末劑 is relatively commercialized type then. Here, it includes later 湯劑 but there was no name such as 'decoction(湯)' or 'decoction of medical ingredients(湯液)'. Also, 'Fu Ju(㕮咀)' is the transformation of what was 'Fu Qie(父且)' at "Ja Liao Fang" of medical books of Ma Wang Dui with time flow. The original meaning of 'Fu Qie(父且)' is 'Fu Zu(斧俎)' and it means the crushing medicine with axe. The most important thing among the medical books of Han dynasty is "Shen Nong Ben Cao Jing(神農本草經)" and "Shang Han Za Bing Lun(傷寒雜病論)" of Zhang Zhong Jing(張仲景). "Shen Nong Ben Cao Jing" mentioned the dry method of medicine, collection and process production time, cooked and uncooked use of medicine and there are several types of medicine. Other than those, it mentioned 'Seven methods of combining herbs(七情合和)' to address cautions for combining medicines. Therefore, the 'processing of medicinal' in east Han dynasty period entered the theoretical step. However, there is only little recording on cloth manufacture of detailed medicine. From the "Shang Han Za Bing Lun" of Zhang Zhong Jing, the development in the way of 'processing of medicinal' reveled the cloth manufacture for each medicine. This tradition is continued until today and so it presents the development of purpose of 'processing of medicinal' is to greatly present the effect of medicine and to reduce the side-effect.
Clustering is a process of grouping similar or relevant documents into a cluster and assigning a meaningful concept to the cluster. By this process, clustering facilitates fast and correct search for the relevant documents by narrowing down the range of searching only to the collection of documents belonging to related clusters. For effective clustering, techniques are required for identifying similar documents and grouping them into a cluster, and discovering a concept that is most relevant to the cluster. One of the problems often appearing in this context is the detection of a complex concept that overlaps with several simple concepts at the same hierarchical level. Previous clustering methods were unable to identify and represent a complex concept that belongs to several different clusters at the same level in the concept hierarchy, and also could not validate the semantic hierarchical relationship between a complex concept and each of simple concepts. In order to solve these problems, this paper proposes a new clustering method that identifies and represents complex concepts efficiently. We developed the Hierarchical Overlapping Clustering (HOC) algorithm that modified the traditional Agglomerative Hierarchical Clustering algorithm to allow overlapped clusters at the same level in the concept hierarchy. The HOC algorithm represents the clustering result not by a tree but by a lattice to detect complex concepts. We developed a system that employs the HOC algorithm to carry out the goal of complex concept detection. This system operates in three phases; 1) the preprocessing of documents, 2) the clustering using the HOC algorithm, and 3) the validation of semantic hierarchical relationships among the concepts in the lattice obtained as a result of clustering. The preprocessing phase represents the documents as x-y coordinate values in a 2-dimensional space by considering the weights of terms appearing in the documents. First, it goes through some refinement process by applying stopwords removal and stemming to extract index terms. Then, each index term is assigned a TF-IDF weight value and the x-y coordinate value for each document is determined by combining the TF-IDF values of the terms in it. The clustering phase uses the HOC algorithm in which the similarity between the documents is calculated by applying the Euclidean distance method. Initially, a cluster is generated for each document by grouping those documents that are closest to it. Then, the distance between any two clusters is measured, grouping the closest clusters as a new cluster. This process is repeated until the root cluster is generated. In the validation phase, the feature selection method is applied to validate the appropriateness of the cluster concepts built by the HOC algorithm to see if they have meaningful hierarchical relationships. Feature selection is a method of extracting key features from a document by identifying and assigning weight values to important and representative terms in the document. In order to correctly select key features, a method is needed to determine how each term contributes to the class of the document. Among several methods achieving this goal, this paper adopted the $x^2$�� statistics, which measures the dependency degree of a term t to a class c, and represents the relationship between t and c by a numerical value. To demonstrate the effectiveness of the HOC algorithm, a series of performance evaluation is carried out by using a well-known Reuter-21578 news collection. The result of performance evaluation showed that the HOC algorithm greatly contributes to detecting and producing complex concepts by generating the concept hierarchy in a lattice structure.
The Journal of Korean Institute of Communications and Information Sciences
/
v.35
no.4A
/
pp.332-340
/
2010
In this paper, we deal with multi-user diversity scheduling methods that transmit simultaneously signals from multiple users using superposition coding multiplexing. These methods can make various scheduling methods be obtained, according to strategies for user selection priority from the first user to the first-following users, strategies for per-user power allocation, and resulting combining strategies. For the first user selection, we consider three strategies such as 1) higher priority for a user with a better channel state, 2) following the proportional fair scheduling (PFS) priority, 3) higher priority for a user with a lower average serving rate. For selection of the first-following users, we consider the identical strategies for the first user selection. However, in the second strategy, we can decide user priorities according to the original PFS ordering, or only once an additional user for power allocation according to the PFS criterion by considering a residual power and inter-user interference. In the strategies for power allocation, we consider two strategies as follows. In the first strategy, it allocates a power to provide a permissible per-user maximum rate. In the second strategy, it allocates a power to provide a required per-user minimum rate, and then it reallocates the residual power to respective users with a rate greater than the required minimum and less than the permissible maximum. We consider three directions for scheduling such as maximizing the sum rate, maximizing the fairness, and maximizing the sum rate while maintaining the PFS fairness. We select the max CIR, max-min fair, and PF scheduling methods as their corresponding reference methods [1 and references therein], and then we choose candidate scheduling methods which performances are similar to or better than those of the corresponding reference methods in terms of the sum rate or the fairness while being better than their corresponding performances in terms of the alternative metric (fairness or sum rate). Through computer simulations, we evaluate the sum rate and Jain’s fairness index (JFI) performances of various scheduling methods according to the number of users.
This study carried out to build up new synthetic egg production lines which had sex-linked gene for feather color sexing and also superior combining ability for producing the best commercial chicks. The closed flock breeding method was utilized to improve the general performances in the first experiment and combining ability for heterosis was tested for new synthetic line in the second experimental year. In order to test for the egg production ability in cross breeds synthetic lines, the crossing of B$\times$4 B$\times$C, two imported strains and two domestic strains as controls were compared for the general performances. There was on difference in mortality, body weight to 56 weeks of age. Sexual maturity was delayed about 10 days by comparing with other reports, except 153 days of the Manina White, but no difference among mating systems in this experiment. The hen housed egg production in B$\times$A, B$\times$C was 186.3, 191.3 respectively and it was better than the other controls, except ISA imported lines. The hen-day egg production of B$\times$A, B$\times$C was better than other controls, with 75.7%, 76.8% respectively. In the average egg weight, the B$\times$C cross breed was highest with 64.5g. As the sex of hatching chicks was identified by difference of feather color, the genetic composition of synthetic lines must be homogenized. The feather color of female chicks was brown and that of male was silver (99%), In conclusion, the egg production ability of B$\times$A, B$\times$C cross breeds was superior to the imported and domestic lines. Therefore, it suggest that the synthetic lines with sex-linked gene might be utilized for improving egg production performances.
Asia-Pacific Journal of Business Venturing and Entrepreneurship
/
v.10
no.2
/
pp.27-42
/
2015
The aim of this research is to investigate the difference in the capturing opportunities for each type of venture companies in the industry undergoing competition of a dominant design and then figure out the reason why they can be successful. Existing studies on venture companies are focused on the way to enhance a firm's competencies by acquiring and combining its resources. However, it is important for startups which have a lack of resources and capabilities to capture the opportunity to survive by understanding a changing environment. This study is focused on opportunity capture and strategic response to a changing environment and attempts to select and observe startup companies which are able to capture the opportunity and enter the market in the industry undergoing dominant design competition. In order to find out its difference in different types of business, we select one case from hardware startups and the other from software startups. According to the result of this study, the hardware startup focuses on market extension by lowering their prices and the software startup strives to induce more users to participate by the universalization of enabling technology so as to extend and standardize their technology in the environment undergoing dominant design competition. This feature of environment leads the difference in the approach for successfully capturing opportunity and thus hardware firms need to recognize the opportunity with profit potential from relationship with a number of cooperative firms while software firms need to identify the opportunity for extension of enabling technology which can be used by many users.
We consider the problem of scheduling tasks of a precedence constrained task graph, where each task has its execution time and deadline, onto a set of identical processors in a way that simultaneously minimizes the number of processors required and the total tardiness of tasks. Most existing approaches tend to focus on the minimization of the total tardiness of tasks. In another methods, solutions to this problem are usually computed by combining the two objectives into a simple criterion to be optimized. In this paper, the minimization is carried out using a multiobjective genetic algorithm (GA) that independently considers both criteria by using a vector-valued cost function. We present various GA components that are well suited to the problem of task scheduling, such as a non-trivial encoding strategy. a domination-based selection operator, and a heuristic crossover operator We also provide three local improvement heuristics that facilitate the fast convergence of GA's. The experimental results showed that when compared to five methods used previously, such as list-scheduling algorithms and a specific genetic algorithm, the Performance of our algorithm was comparable or better for 178 out of 180 randomly generated task graphs.
Kim, Young-Chan;Lee, Sun;Lee, Kyung-Mi;Im, Sung-Young;Park, Yong-Geun;Baek, Hyung-Seok;Park, Kyung-Ryang;Lee, In-Soo
Journal of Life Science
/
v.9
no.2
/
pp.169-175
/
1999
Salmonella typhimurium can encounter a wide variety of environments during its life cycle. In nature, S. typhimurium can experience and survive dramatic acid stresses that occur in diverse ecological niches ranging from pond water to phagolysosomes. These survival mechanism is aquired by the Acid Tolerance Response(ATR) in Salmonella. The ATR of S. typhimurium is a complex inducible phenomenon in which exposures to slight or moderate low pH will produce a stress response capable of protecting the organism against more severe acid challenges. ATR in Salmonella has two different systems that are called RpoS dependent and independent. We found that ATR in anaerobic was showed RpoS independent because rpoS$\Omega$AP had ATR as S. typhimurium UK1. Using the P22 MudJ(Km, lacZ) operon fusion technique and a lethal selection procedure combining low pH(pH4.5) and sodium acetate(10mM, pH4.5), we isolated LF487 aatA::MudJ which showed acid sensitive in anaerobic condition. aatA locus was determined at 12 min on Salmonella Genetic Map. The survival rate of aatA mutant was showed significantly diminished at pH4.3 than virulent wild type Salmonella in anaerobic condition(5% $CO_2$, 5% H$_2$, 90% $N_2$). Therefore isolated gene was confirmed important gene for anaerobic ATR system.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.