• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.263-272
• /
• 2012

Carbon dioxide, emitted by human activities since the industrial revolution, is regarded as a major contributor of global warming. There are many efforts to mitigate climate change, and carbon dioxide capture and geological storage (CCS) is recognized as one of key technologies because it can reduce carbon dioxide emissions from large point sources such as a power station or other industrial installation. The inclusion of CCS as clean development mechanism (CDM) project activities has been considered at UNFCCC as financial incentive mechanisms for those developing countries that may wish to deploy the CCS. Although the Conference of the Parties serving as the Meeting of the Parties to the UNFCCC's Kyoto Protocol (CMP), at Cancun in December 2010, decided that CCS is eligible as CDM project activities, the issues identified in decision 2/CMP.5 should be addressed and resolved in a satisfactory manner. Major issues regarding modalities and procedure are 1) Site selection, 2) Monitoring, 3) Modeling, 4) Boundaries, 5) Seepage Measuring and Accounting, 6) Trans-Boundary Effects, 7) Accounting of Associated Project Emissions (Leakage), 8) Risk and Safety Assessment, and 9) Liability Under the CDM Scheme. The CMP, by its decision 7/CMP.6, invited Parties to submit their views to the secretariat of Subsidiary Body for Scientific and Technological Advice (SBSTA), SBSTA prepared a draft modalities and procedure by exchanging views of Parties through workshop held in Abu Dhabi, UAE (September 2011). The 7th CMP (Durban, December 2011) finally adopted the modalities and procedures for CCS as CDM project activities (CMP[2011], Decision-/CMP.7). The inclusion of CCS as CDM project activities means that CCS is officially accredited as one of $CO_2$ reducing technologies in global carbon market. Consequently, it will affect relevant technologies and industry as well as law and policy in Korea and aboard countries. This paper presents a progress made on discussion and challenges regarding the issue, and aims to suggest some considerations to policy makers in Korea in order to demonstrate and deploy the CCS project in the near future. According to the adopted modalities and procedures for CCS as CDM project activities, it is possible to implement relevant CCS projects in Non-Annex I countries, including Korea, as long as legal and regulatory frameworks are established. Though Korea enacted 'Framework Act on Low Carbon, Green Growth', the details are too inadequate to content the requirements of modalities and procedures for CCS as CDM project. Therefore, it is required not only to amend the existing laws related with capture, transport, and storage of $CO_2$ for paving the way of an prompt deployment of CCS CDM activities in Korea as a short-term approach, but also to establish the united framework as a long-term approach.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.4
• /
• pp.37-45
• /
• 2006

Recently, wood-framed houses has been built in the Korea for pension. Wood is good material for human healthy, while the construction lumbers are treated with preservative such as CCA (chromated copper arsenate), which contain some toxic elements for human body. However, if the waste woody biomass treated with various heavy metals, which has been collected from house construction or demolition, was fired in the field, and incinerated or landfilled after mass collection, such components will result in the toxic air pollutants in the burning or land fills, and spreaded into other areas. So the careful selection of wood and chemicals are required in advance for house construction, in particular, for environment-friendly housings. Therefore, this study was carried out to determine the content of toxic heavy metals in woody materials such as domestic hinoki and imported hemlock treated with CCA for housing materials, and the post-treated wood components such as organic fertilizer, sludge, dry-distilled charcoal and carbonized charcoal, to be returned finally into soil. The results are as follows. 1) The chemical analysis of toxic trace elements in various solid biomass required accurate control and management of laboratory environment, and reagents and water used, because of the error of data due to various foreign substances added in various processing and transporting steps. So a systematic analyzers was necessary to monitor the toxic pollutants of construction materials. 2) In particular, the biomass treated with industrial biological or thermal conditions such as sludge or charcoals was not fully dissolvable after third addition of $HNO_3$ and HF. 3) The natural woody materials such as organic fertilizer, sludge. and charcoals without any treatment of preservatives or heavy metal components were nontoxic in landfill because of the standard of organic fertilizers, even after thermal or biological treatments. 4) The CC A-treated wood for making the construction wood durable should not be landfilled, because of its higher contents of toxic metals than the criterion of organic fertilizer for agriculture or of natural environment. So the demolished waste should be treated separately from municipal wastes.

• Journal of the Korean Arthroscopy Society
• /
• v.4 no.1
• /
• pp.19-24
• /
• 2000

Purpose : To clinically analyze 62 patients who had meniscal repair and compare the results according to methods of repair. Materials and Methods : Between May 1997 and June 1998, we repaired 68 torn menisci in 68 patients. There were 52 male and 10 female with an average age of 26.9 years(ranging from 6 to 51 years). We used Linvatec suture in 46 knees(group A)and meniscal arrow in 16 knees(B group). In six knees we used Linvatec and meniscal arrow both. These 6 knees were excluded and 62 of 68 repaired meniscus were analyzed in this study. Average follow-up period was 18.5 months(ranging 12 to 26 months). We evaluated clinical results by Tapper and Hoover's grading system and subjective symptoms of the patients. Results : There were excellent in 47 cases$(76\%)$, good in 12$(19\%)$ and fair in 3$(5\%)$. In group A, there were excellent in 35 cases$(76\%)$, good in 9$(20\%)$ and fair in 2$(4\%)$. In group B, there were excellent in 12 cases$(75\%)$, good in 3$(19\%)$ and fair in 1$(6\%)$. There was no significant differences in clinical results between two groups. But mean operative time taken for meniscus repair was 40 minutes in group A and 25 minutes in group B. Conclusion : We can obtain good clinical results with short operation time in meniscal repair by proper selection of methods of repair according to the type, location, and size of meniscal tear and associated lesions.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.21
• /
• pp.9487-9494
• /
• 2014

Background: The size of a hepatic neoplasm is critical for staging, prognosis and selection of appropriate treatment. Our study aimed to compare the radiological size of solid hepatocellular carcinoma (HCC) masses on magnetic resonance imaging (MRI) with the pathological size in a Chinese population, and to elucidate discrepancies. Materials and Methods: A total of 178 consecutive patients diagnosed with HCC who underwent curative hepatic resection after enhanced MRI between July 2010 and October 2013 were retrospectively identified and analyzed. Pathological data of the whole removed tumors wereassessed and differences between radiological and pathological tumor size were identified. All patients were restaged using a modified Tumor-Node-Metastasis (TNM) staging system postoperatively according to the maximum diameter alteration. The lesions were classified as hypo-staged, iso-staged or hyper-staged for qualitative assessment. In the quantitative analysis, the relative pre and postoperative tumor size contrast ratio ($%{\Delta}size$) was also computed according to size intervals. In addition, the relationship between radiological and pathological tumor diameter variation and histologic grade was analyzed. Results: Pathological examination showed 85 (47.8%) patients were overestimated, 82 (46.1%) patients underestimated, while accurate measurement by MRI was found in 11 (6.2%) patients. Among the total subjects, 14 (7.9%) patients were hypo-staged and 15 (8.4%) were hyper-staged post-operatively. Accuracy of MRI for calculation and characterized staging was related to the lesion size, ranging from 83.1% to 87.4% (<2cm to ${\geq}5cm$, p=0.328) and from 62.5% to 89.1% (cT1 to cT4, p=0.006), respectively. Overall, MRI misjudged pathological size by 6.0 mm (p=0.588 ), and the greatest difference was observed in tumors <2cm (3.6 mm, $%{\Delta}size=16.9%$, p=0.028). No statistically significant difference was observed for moderately differentiated HCC (5.5mm, p=0.781). However, for well differentiated and poorly differentiated cases, radiographic tumor maximum diameter was significantly larger than the pathological maximum diameter by 3.15 mm and underestimated by 4.51 mm, respectively (p=0.034 and 0.020). Conclusions: A preoperative HCC tumor size measurement using MRI can provide relatively acceptable accuracy but may give rise to discrepancy in tumors in a certain size range or histologic grade. In pathological well differentiated subjects, the pathological tumor size was significantly overestimated, but underestimated in poorly differentiated HCC. The difference between radiological and pathological tumor size was greatest for tumors <2 cm. For some HCC patients, the size difference may have implications for the decision of resection, transplantation, ablation, or arterially directed therapy, and should be considered in staging or selecting the appropriate treatment tactics.

• Journal of Korean Home Economics Education Association
• /
• v.29 no.4
• /
• pp.117-131
• /
• 2017

This study was performed to analyze education contents related to milk in current home economics textbooks of middle school, and to investigate intake status, consumption behaviors, perception and nutritional knowledge of milk and dairy products among 364 middle school students in Gongju for improvement of milk education in home economics subjects and milk intake of adolescents. As a result, education contents of milk and dairy products in home economics textbooks currently applied in middle school were major nutrients, consumption method for balanced diet, and selection and storage of milk and dairy products, thus it tended not to match current food trend. Only 30.5% of subjects met 2 cups of milk a day, the recommended level. The main reason for drinking milk was to 'be taller' and 'to quench thirst' and there was a difference by gender(p<0.01). The rate of not participating in school milk program was 23.1% of total and its satisfaction was moderate. The most popular dairy products by subjects were ice cream, followed by yogurt and cheese, and the choice of milk was focused on 'taste' or 'expiration date'. The rate of knowing certification mark of K-MILK was low at 28.8%, and most subjects knew as 'domestic milk use'. In home economics class, experience-based learning such as cow ranch experience was the most preferred instruction method for milk followed by laboratory practice and lecture, and there was a difference by gender(p<0.001). Perception degree of milk and dairy products was moderate and male subjects were more positively perceived than female subjects(p<0.01). Nutritional knowledge level of milk and dairy products was moderate and female subjects were higher than male subjects(p<0.01). Therefore, education contents of milk and dairy products of home economics textbooks of middle school should be centered on real life in accordance with food trend, and applied student participation-based instruction methods such as experience-based learning. In addition, it is necessary to enhance taste and merchandise of milk and to provide them with preferred milk and dairy products in school milk program for improvement of milk intake of adolescents.

• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.583-592
• /
• 2014

This study was carried out to investigate the operational time and productivity of logging operation by chain saw, yarder attached on tractor, tower-yarder, mini-truck, mini-forwarder, and chipping operations by mini-chipper, large-chipper in order to develop the efficient logging operation system for utilization of forest-biomass. As a result, the average felling and bucking time using chain saw at the site 1 and 2 was observed to be 182.7 sec/cycle and 518.5 sec/cycle respectively. The average yarding time was 202.5 sec/cycle using yarder attached on tractor and 295.1 sec/cycle using tower-yarder. The average forwarding time was 2,073 sec/cycle using mini-truck and 2,248.4 sec/cycle using mini-forwarder. The operational time of felling and bucking using chain-saw can be delayed according to the direction of fallen trees. The selection of felling direction is very important to yarding operation because the direction between width-yarding and felling are interrelated. Productivity can be improved through educating and training operators in the yarding operations. Mini-forwarder is needed to use because of higher productivity and lower cost than mini-truck. The operational productivity of felling and bucking by chain saw was $66.96m^3/man{\cdot}day$ and $43.86m^3/man{\cdot}day$ at site 1 and 2 respectively. The yarding productivity was $5.68m^3/man{\cdot}day$ by yarder attached on tractor, $10.74m^3/man{\cdot}day$ by tower-yarder. The forwarding productivity was $21.29m^3/man{\cdot}day$ by mini-truck, $28.57m^3/man{\cdot}day$ by mini-forwarder. The chipping productivity was $4.42m^3/man{\cdot}day$ by mini-chipper, $21.87m^3/man{\cdot}day$ by large-chipper.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.5
• /
• pp.77-90
• /
• 2016

This study is to examine the importance of site selection and service quality in franchise business as food service franchise became one of the fastest-growing service industries today. The chief finding of this study is as follows: First, a survey in locational and service quality factors affecting food service franchise shows that responders are more concerned with hygiene and visibility of the store than proximity and transportation advantages which reflects low statistical significance, thus the distance did not seem to be a big problem for the responders in the context that they mostly visit nearby food franchise. Second, the examination of the influence by the service quality factors and customer satisfaction shows significant positive relation with customer response, speed and accuracy, and accuracy factors which reveals that the responders prefer prompt response and swift judgment toward the customer's needs and expectations, professional knowledge services to the credibility factors in which little correlation with the customer satisfaction were found. Third, the examination of the influence by the service quality factors, locational factors, and re-visit reveals that customer response and specialty showed statistically significant correlation with intention of WOM (Word of Mouth) and revisit, which suggests that swift judgment and response toward the customer's needs and expectations, professional knowledge services is of great importance to both customer satisfaction and revisit. The study on the aspects of locational and service quality factors affecting franchise industry's customer satisfaction was conducted as above, an investigation in both factors' influence on the customer satisfaction was made, and based on the results of the analysis, this research seeks an optimal operation strategy of a franchise business. Food service franchise are relatively very competent to business adminstration and reaction capability to consumption changes due to the already established market, and there are stores springing up everywhere inspired by the founders who are too confident of their success in the franchise business. However, it is necessary for the franchise beginners to figure out a zone oriented, regular customer oriented business strategy than just complying with the head office manual. Owing to an increasing trend of opening medium to large sized stores and investments in the wake of converting to multiple business type Korean food franchise, there is growing need to set up new concept of store development and operational management strategy in order to overcome the excessive competition and limited sales volume of the old-fashioned small sized, small capital franchise stores. Furthermore, as most business category of food service franchise serve very similar menus, from a product differentiation point of view, it is required to map out flexible sales concept including the adoption of competitive and low-price strategy. In conclusion, as is shown in the analytical research, the customers' optimal choice fluctuate over their preferences like customer convenience and circumstances rather than insisting on specific brand, thus it will be necessary for the franchise stores to draw up aggressive strategy and planning in running food service franchise to maximize their profits.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.1
• /
• pp.7-13
• /
• 2001

Calli were induced from diploid and haploid tobacco after 4 weeks and maintained on MS medium with combination of 2.0 mg/L 2,4-D,0.1 mg/L BAP and 2.0 mg/L kinetin. Suspension cells were screened through 65 $\mu$m-nylon mesh and 100 $\mu$m-mesh, then they were smeared on selection medium combined with cadmium and PFP by using the low melting agarose of 0.8%. After 30days smeared cultures of the medium the cell was treated with 500 $\mu$M and 1000 $\mu$M to select the resistant cell line were selected. Plant regeneration was induced from the selected cell lines on medium with 0.5, 1.5, 2.0 mg/L BAP and on media with combination of auxin and BAP under 500 $\mu$M and 1000 $\mu$M cadmium. At this time, plant regeneration was achived on cadmium free medium. In case of haploid, occurred from the cell line which is selected in medium with cadmium and PFP. In case of diploid regeneration occurred is in the medium with cadmium alone. The plantlet regenerated from cadmium resistant calli grew well in cadmium 500 $\mu$M. Protein pattern of leaf, root, stem of regenerated plants was analyzed. The quantum was 6.5188 ug/mg.fr.wt in the leaf of plant, 5.3611 ug/mg.fr.wt in the stem, 3.0213 ug/mg.fr.wt in the root. On the other hand, 5.9652 ug/mg.fr.wt. in the leaf of control, 3.5974 ug/mg.fr.wt in the stem of the control, 4.3766 ug/mg.fr.wt. in the root of the control. The one dimension bends regenerated from cadmium resistant calli resistant to cadmium in leaf were 49 involving 198.7KD etc. Disappeared were 4 involving 160.5KD etc, The protein bends were combinized were 3 involving 83.4KD etc. The bends resistant to cadmium stress in stem were 41 involving 4.3KD etc. Disappeared were 5 involving 114.8KD etc. The protein bends combinized were 6 involving 128.7KD etc. The bends which had the resistance to cadmium stress in root is 27 in volving 166,9KD etc. The bends which disappeared were 198.7KD etc. There were 5 involving 83.4KD etc.

• Journal of Life Science
• /
• v.27 no.3
• /
• pp.295-300
• /
• 2017

This study examined the association between genotypes of the isocitrate dehydrogenase 3, beta subunit (IDH3B) gene and economic traits in an $F_2$ population of Duroc and Jeju (South Korea) native black pigs (JBPs). The genotypes was determined the presence/absence of a 304-bp insertion/deletion fragment in the promoter region of the IDH3B gene for JBP, Duroc, and their $F_1$ and $F_2$ progeny. Three genotypes (AA, AB and BB) were found in the $F_1$ and $F_2$ populations, but there was no AA genotype found in JBP and no BB in Duroc. Association analysis results showed the significant differences with carcass weights (CW), backfat thicknesses (BFT) and eye muscle area (EMA) (p<0.05), but not with growth traits including body weights and average daily gains at different stages, reproductive traits including teat numbers, and crude fat contents (CFAT) measured in longissimus dorsi (p>0.05). The $F_2$ pigs possessing the IDH3B BB homozygote had heavier CW ($72.92{\pm}11.133kg$), thicker BFT ($25.75{\pm}6.06mm$), and larger EMA ($23.82{\pm}4.825cm^2$) than those from the other genotypes (p<0.05). These results were estimated that there are biological roles related with IDH3B genotypes resulting development of EMA, BFT, and CW but not with intramuscular fat deposition during late period of pig production. Our findings suggest that the 304-bp insertion allele of porcine IDH3B may be a genetic marker for marker assistant selection for improving meat productivity of the Jeju Black pig and Duroc-related molecular breeding systems.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.749-756
• /
• 2019

Na-X and Na-A zeolites that give high adsorption capacity for heavy metals in an aqueous system were synthesized from the coal fly ash obtained from a thermoelectric power plant using a fusion method. The characteristics and Cu(II) adsorption capacity of the synthetic zeolites were also compared to those of using a commercial zeolite. For the selection of optimum conditions of zeolite synthesis, the effects of major parameters in the fusion method such as a dosage ratio of NaOH, aging time, hydrothermal reaction time, and also the dosage ratio of NaAlO₂ (Na-A) on the characteristics and Cu(II) adsorption capacity of the synthetic zeolites were studied. For the analysis of characteristics of the synthetic zeolites, X-ray diffraction (XRD), cation exchange capacity (CEC), Brunaue-Emmett-Teller (BET) and scanning electron microscopy (SEM) were used. The optimum conditions for the synthesis of zeolites with a high adsorption capacity for cationic heavy metals including Cu(II) were the aging time of 6 h, hydrothermal reaction time of 6 h and NaOH and NaAlO₂ dosage ratio of 1.5 and 0.5 (Na-A), respectively. According to the Langmuir isotherm test, maximum Cu(II) adsorption capacities of the synthetic and commercial Na-X and Na-A zeolites were found to be 90.1, 105.26, 102.05, and 109.89 mg/g, respectively. This indicates that the adsorption capacity of synthetic zeolites was comparable to commercial ones. The results of this study also suggest that the coal fly ash can be potentially used as a raw material for the zeolite synthesis.