• 한국구조물진단유지관리공학회 논문집
• /
• 제26권1호
• /
• pp.39-48
• /
• 2022

지진 발생 시 방송통신서비스는 현장 구조 및 효과적인 복구 작업에 직결된다. 최근에 다양한 면진장치들이 방송통신설비의 심각한 피해를 방지하기 위하여 건물 층과 방송통신설비의 바닥부 사이에 설치하는 방법이 널리 사용되고 있다. 하지만 긴 고유주기를 가진 건물은 공진현상에 따른 예상치 못한 응답증폭으로 인하여 더 큰 피해가 발생할 수도 있다. 따라서 본 연구에서는 두 개의 면진장치를 선정 후 중층, 고층건물의 해석적, 실험적 연구를 통하여 면진장치가 바닥부에 설치된 방송통신설비의 내진 안전성을 평가를 목표로 한다. 해석적 연구를 수행하여 가진 시 중층, 고층건물 최고층의 저주파수 영역대의 동적응답을 확인하였다. 또한 해석적 연구에서 확보한 층응답을 바닥부에 면진장치가 설치된 방송통신 설비를구비하여 실증 실험을 통해 내진안정성을 평가하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.403-410
• /
• 2003

This paper presents the results of experimental studies on the equipment isolation effect in the nuclear containment. For this purpose, shaking table tests were performed. The isolation system, known as Friction Pendulum System (FPS), combines the concepts of sliding bearings and pendulum motion was selected. Peak ground acceleration, bidirectional motion, effect of vertical motion and frequency contents of selected earthquake motions were considered. Finally, it is presented that the FPS systems are effective for the small equipment isolation. Key word equipment isolation, nuclear containment, shaking table test, Friction Pendulum System (FPS)

• 한국지진공학회논문집
• /
• 제25권6호
• /
• pp.241-249
• /
• 2021

Communication facilities play an essential role in disaster situations. Therefore, communication facilities need to have structural and functional safety during and after earthquakes. Recently, technology for partial seismic isolation has been increasing to protect data facilities and communication equipment installed in buildings from earthquakes. However, excessive displacement may occur in the seismic isolator during an earthquake due to the resonance between the building and the seismic isolator having long-period characteristics, which may cause overturning and separation of the installed equipment. In this study, analytical and experimental studies were conducted to evaluate the safety of seismic isolators installed in high-rise buildings. It was confirmed that damages might occur in buildings' seismic isolator, with resonance characteristics of less than 1 Hz.

• Advances in Computational Design
• /
• 제2권3호
• /
• pp.211-223
• /
• 2017

This research presented a numerical and experimental study on the seismic performance of first-generation base-isolated and fixed-base nuclear power plants (NPP). Three types of the base isolation system were applied to rehabilitate the first-generation nuclear power plants: frictional pendulum (FP), high-damping rubber (HDR) and lead-rubber (LR) base isolation. Also, an Excel program was proposed for the design of the abovementioned base isolators in accordance with UBC 97 and the Japan Society of Base Isolation Regulation. The seismic assessment was performed using the pushover and nonlinear time history analysis methods in accordance with the FEMA 356 regulation. To validate the adequacy of the proposed design procedure, two small-scale NPPs were constructed at Universiti Teknologi Malaysia's structural laboratory and subjected to a pushover test for two different base conditions, fixed and HDR-isolated base. The results showed that base-isolated structures achieved adequate seismic performance compared with the fixed-base one, and all three isolators led to a significant reduction in the containment's tension, overturning moment and base shear.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.25-28
• /
• 2004

Many highway bridges in Korea need seismic retrofit because only one decade has passed since the seismic design criteria was introduced. In this experimental study, the effectiveness of base isolation bearings was discussed for the seismic retrofit of the highway bridges. Four real scale RC pier specimens were constructed for the test. These RC piers didn't have seismic details. Except for one RC pier for the pilot test, three types of bearings such as Pot bearing, Rubber bearing (RB), Lead-rubber bearing (LRB) were applied to the other RC piers respectively. The RC pier with Pot bearing means current state of the prototype bridge that is not retrofitted seismically. And two RC piers with RB or LRB mean assumed states of the prototype bridge that are retrofitted seismically. To simulate dynamic behavior of these RC piers under earthquake loads, Pseudo-dynamic test method was used.

• 한국지진공학회논문집
• /
• 제12권1호
• /
• pp.67-77
• /
• 2008

내진기술의 한 방안으로서 지진격리받침을 설치하여 지진력을 감소시키고, 지진피해를 최소화하고자 하는 연구가 계속되고 있다. 이와 같은 지진격리시스템의 설계 및 시공을 위해서는 먼저 지진격리받침의 제작시 지진격리받침의 균일한 품질유지 및 내진에 대한 성능검증이 뒤따라야 한다. 이를 위해 본 연구에서는 지진격리받침인 납-적층고무받침(LRB)와 적층고무받침(RB)의 전단특성 평가시험을 실시하였으며. 온도변화에 따른 전단특성 변화를 파악하기 위해 온도의존성 시험도 실시하였다. 시험후 측정값을 설계 기준값과 비교하여 전단성능에서의 오차를 조사하고, 이를 도로교 설계기준의 허용한계와 비교 분석하였다. 시험결과 지진격리받침의 상당수가 도로교 설계기준의 허용한계를 넘거나 근접해 있는 것으로 나타났다. 그리고 공용중에 전단특성을 변화시키는 온도변화에 의한 영향도 매우 큰 것으로 파악되었는데, 제작 초기의 품질오차가 이런 영향과 중첩된다면 처음 설계값보다 50% 이상 큰 전단강성 변화를 보일 가능성도 있는 것으로 나타났다.

• International Journal of Concrete Structures and Materials
• /
• 제9권4호
• /
• pp.439-451
• /
• 2015

This study analyzed the isolation effect for a 15-story reinforced concrete (RC) building with regard to changes in the beam-column stiffness ratio and the difference in the vibration period between the superstructure and an isolation layer in order to provide basic data that are needed to devise a framework for the design of isolated RC buildings. First, this analytical study proposes to design RC building frames by securing an isolation period that is at least 2.5 times longer than the natural vibration period of a superstructure and configuring a target isolation period that is 3.0 s or longer. To verify the proposed plan, shaking table tests were conducted on a scaled-down model of 15-story RC building installed with laminated rubber bearings. The experimental results indicate that the tested isolated structure, which complied with the proposed conditions, exhibited an almost constant response distribution, verifying that the behavior of the structure improved in terms of usability. The RC building's response to inter-story drift (which causes structural damage) was reduced by about one-third that of a non-isolated structure, thereby confirming that the safety of such a superstructure can be achieved through the building's improved seismic performance.

• 한국강구조학회 논문집
• /
• 제25권1호
• /
• pp.81-92
• /
• 2013

기존 내진설계의 목적은 구조물의 갑작스런 피해로 인한 인명손실을 방지하는 것이다. 지난 수십년간 구조물의 내진성능을 향상시키기 위해서 효과적인 지진저항시스템을 개발하는 수많은 연구들이 진행되었다. 본 연구의 목적은 내진성능을 향상시킴과 동시에 지진 이후 보수가 편리하도록 하는 새로운 제진시스템을 제안하는데 있다. 제안된 제진시스템은 벽의 하부에 슬릿을 두고 제진장치가 수평으로 작동하도록 하여 지진에너지를 소산하도록 계획되었다. 제안된 시스템의 이력거동과 에너지소산능력을 조사하기 위해서 반복가력실험을 실시하였다. 실험결과는 제안된 시스템이 안정된 이력응답을 나타내며, 에너지의 소산은 제진장치에 집중되는 것을 보여준다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.341-348
• /
• 2002

In these days, The base isolation system is often used to improve the seismic capacity of the structures instead of conventional techniques of strengthening the structural members. The purpose of this study is to evaluate dynamic property evaluation of control equipment using lead Lead Rubber Bearing. In this study, a base isolation test of seismic monitoring control cabinet with LRB(lead rubber bearing) was performed. The cabinet will be installed on access floor in MCR(main control room) of nuclear power plant. Details and dynamic characteristics of the access floor were considered in the construction of testing specimen. N-S component of El Centre earthquake was used as seismic input motion. Acceleration response spectrums in the top of cabinets showed that the first mode frequency of cabinet with LRB(lead rubber bearing) was shifted to 7.5 Hz in compared with 18Hz of cabinet without LRB and the maximum peak acceleration was reduced in a degree of22 percent from 2.35 g to 1.84 g

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.445-452
• /
• 2005

The seismic characteristics with Friction Pendulum System have been studied using a shaking table system. In this study, we made two kind of floor system (Type I, Type II) and several seismic tests with and without isolation system were conducted to evaluate floor isolation effectiveness of Friction Pendulum System. Both type have showed large reduction effectiveness in acceleration, response spectra but Type II have showed lower acceleration and lower first mode in response spectra, compared to type I. On the basis of test results and consideration of application, it is found that type II is more suitable for floor model of main control room of Nuclear Power Plant.