• 제목/요약/키워드: Segregation-Free

검색결과 50건 처리시간 0.02초

Al 5083O합금의 마찰교반용접부의 조직과 특성평가 (Mechanical Characteristics and Macro-and Micro-structures on Friction Stir Welded Joints with 5083O Al Alloys)

  • 장석기;박종식
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제33권1호
    • /
    • pp.104-111
    • /
    • 2009
  • This paper shows the behaviors of macro- and micro-structures and mechanical properties for specimen's welding region welded by FSW. according to welding conditions with 5mm thickness aluminum 5083O alloy plate. It apparently results in defect-free weld zone in case traverse speed was changed to 32 mm/min under conditions of anti-clockwise direction and tool rotation speed such as 800 and 1250 rpm with tool's pin diameter of 5 ${\Phi}mm$ and shoulder diameter of 20 ${\Phi}mm$, pin length of 4.5 mm and tilting angle of $2^{\circ}$. The ultimate stress of ${\sigma}_T=331$ MPa and the yield point of 147 MPa are obtained at the condition of the travel speed of 32 mm/min with the tool rotation speed of 1250 rpm. There is neither voids nor cracks on bended surface of $180^{\circ}$ after bending test. The improvement of toughness after impact test was found. The lower rotating and traverse speed became, the higher were yield point, maximum stress and elongation(%) with the stresses and the elongation(%) versus the traverse speed diagram. Vickers hardness for cross section of welding zone were also presented. The typical macro-structures such as dynamically recrystallized zone, thermo-mechanically affected zone and heat affected zone and the micro-structures of the transverse cross-section were also showed. However, the author found out that the region of 6mm far away from shoulder circumference was affected by friction heat comprehensively, that is, hardness softened and that part of micro-structures were re-solid-solution or recrystallized, the author also knew that there is no mechanically deformation on heat affected zone but there are the flow of plastic deformation of $45^{\circ}$ direction on thermo-mechanically affected zone and the segregation of Al-Mg on nugget. The solid solution wt(%) of parent material as compared against of friction stir welded zone was comprehensively changed.

작물 육종에서 분자유전자 지도의 이용 (Genome Mapping Technology And Its Application In Plant Breeding)

  • 은무영
    • 한국식물학회:학술대회논문집
    • /
    • 한국식물학회 1995년도 제9회 식물생명공학 심포지움 식물육종과 분자생물학의 만남 The 9th Plant Biotechnology Symposium -Breeding and Molecular Biology-
    • /
    • pp.57-86
    • /
    • 1995
  • Molecular mapping of plant genomes has progressed rapidly since Bostein et al.(1980) introduced the idea of constructing linkage maps of human genome based on restriction fragment length polymorphism (RFLP) markers. In recent years, the development of protein and DNA markers has stimulated interest for the new approaches to plant improvement. While classical maps based on morphological mutant markers have provided important insights into the plant genetics and cytology, the molecular maps based on molecular markers have a number of inherent advatages over classical genetic maps for the applications in genetic studies and/or breeding schemes. Isozymes and DNA markers are numerous, discrete, non-deleterious, codominant, and almost entirely free of environmental and epistatic interactions. For these reasons, they are widely used in constructing detailed linkage maps in a number of plant species. Plant breeders improve crops by selecting plants with desirable phenotypes. However a plant's phenotyes is often under genetic control, positioning at different "quantitative trait loci" (QTLs) together with environmental effects. Molecular maps provide a possible way to determine the effect of the individual gene that combines to produce a quantitative trait because the segregation of a large number of markers can be followed in a single genetic cross. Using market-assisted selection, plants that contain several favorable genes for the trait and do not contain unfavourable segments can be obtained during early breeding processes. Providing molecular maps are available, valuable data relevant to the taxonomic relationships and chromosome evolution can be accumulated by comparative mapping and also the structural relationships between linkage map and physical map can be identified by cDNA sequencing. After constructing high density maps, it will be possible to clone genes, whose products are unknown, such as semidwarf and disease resistance genes. However, much attention has to be paid to level-up the basic knowledge of genetics, physiology, biochemistry, plant pathology, entomology, microbiology, and so on. It must also be kept in mind that scientists in various fields will have to make another take off by intensive cooperation together for early integration and utilization of these newly emerging high-techs in practical breeding. breeding.

  • PDF

Physicochemical Properties of a Giant Embryo Mutant Induced by T-DNA Insertion in Rice

  • Park, Hee-Yeon;Qin, Yang;Sohn, Jae-Keun
    • 한국작물학회지
    • /
    • 제56권4호
    • /
    • pp.413-419
    • /
    • 2011
  • This study was conducted to determine the physicochemical properties of a giant embryo rice 'P47JB-4-B-5-B' derived from the cross between 'P47', a mutant of 'Hwayoung' induced by T-DNA insertion, and 'Junam'. The grain appearance and chemical components of the embryo were analyzed and compared with a donor cultivar, 'Hwayoung'. The proportion of embryo weight to grain weight of 'P47 JB-4-B-5-B' was 2.2 times heavier (6.7%) than that (3.1%) of 'Hwayoung'. Total free amino acid content (75.81 mg/100 g) of 'P47JB-4-B-5-B' was 2.1 times higher than that of 'Hwayoung'. The GABA content in brown rice was 14.06 mg/100 g in 'P47JB-4-B-5-B' and 6.8 mg/100 g in 'Hwayoung'. Especially, the GABA content in brown rice of 'P47JB-4-B-5-B' remarkably increased (about 33 times from 1.48 mg to 44.81 mg/100 g) 2 days after germination. Continuous frequency distributions and transgressive segregation in embryo length and width were observed in the $F_2$ population of the cross between 'P47' and 'Cheongcheong', indicating that the giant embryo was controlled by quantitative trait loci. However, embryo length and width demonstrated high broad sense heritability, implying that giant embryonic traits could be selected in earlier generations in comparison with other quantitative traits.

Association between obesity and local control of advanced rectal cancer after combined surgery and radiotherapy

  • Choi, Yunseon;Lee, Yun-Han;Park, Sung Kwang;Cho, Heunglae;Ahn, Ki Jung
    • Radiation Oncology Journal
    • /
    • 제34권2호
    • /
    • pp.113-120
    • /
    • 2016
  • Purpose: The association between metabolism and cancer has been recently emphasized. This study aimed to find the prognostic significance of obesity in advanced stage rectal cancer patients treated with surgery and radiotherapy (RT). Materials and Methods: We retrospectively reviewed the medical records of 111 patients who were treated with combined surgery and RT for clinical stage 2-3 (T3 or N+) rectal cancer between 2008 and 2014. The prognostic significance of obesity (body mass index [BMI] ${\geq}25kg/m^2$) in local control was evaluated. Results: The median follow-up was 31.2 months (range, 4.1 to 85.7 months). Twenty-five patients (22.5%) were classified as obese. Treatment failure occurred in 33 patients (29.7%), including local failures in 13 patients (11.7%), regional lymph node failures in 5, and distant metastases in 24. The 3-year local control, recurrence-free survival, and overall survival rates were 88.7%, 73.6%, and 87.7%, respectively. Obesity (n = 25) significantly reduced the local control rate (p = 0.045; 3-year local control, 76.2%), especially in women (n = 37, p = 0.021). Segregation of local control was best achieved by BMI of $25.6kg/m^2$ as a cutoff value. Conclusion: Obese rectal cancer patients showed poor local control after combined surgery and RT. More effective local treatment strategies for obese patients are warranted.

Mechanism of MnS Precipitation on Al2O3-SiO2 Inclusions in Non-oriented Silicon Steel

  • Li, Fangjie;Li, Huigai;Huang, Di;Zheng, Shaobo;You, Jinglin
    • Metals and materials international
    • /
    • 제24권6호
    • /
    • pp.1394-1402
    • /
    • 2018
  • This study investigates the mechanism of MnS precipitation on $Al_2O_3-SiO_2$ inclusions during the solidification of non-oriented silicon steel, especially the influence of the phase structures and sizes of the oxides on the MnS precipitation, by scanning electron microscopy and transmission electron microscopy coupled with energy dispersive spectrometry. The investigation results show that MnS tends to nucleate on submicron-sized $Al_2O_3-SiO_2$ inclusions formed by interdendritic segregation and that it covers the oxides completely. In addition, MnS can precipitate on micron-sized oxides and its precipitation behavior is governed by the phase structure of the oxides. The MnS embryo formed in a MnO-containing oxide can act as a substrate for MnS precipitation, thus permitting further growth via diffusion of solute atoms from the matrix. MnS also precipitates in a MnO-free oxide by the heterogeneous nucleation mechanism. Furthermore, MnS is less prone to precipitation in the $Al_2O_3$-rich regions of the $Al_2O_3-SiO_2$ inclusions; this can be explained by the high lattice disregistry between MnS and $Al_2O_3$.

서울지하철 범죄 실태에 대한 범죄심리학적 연구 (Study on the Realities in Seoul Subway Crimes: Criminal Psychology)

  • 임상곤
    • 시큐리티연구
    • /
    • 제7호
    • /
    • pp.233-285
    • /
    • 2004
  • ‘Defined legally as a violation of law' (Sutherland, E. H. Principles of Criminology, Lippincott, Chicago, 1939) Crime within the group is essentially and primarily antisocial in that the criminal who is welfare of his group acts instead against it and breaks the principles of social solidarity not merely by not doing what these principles prescribe, but by doing something exactly opposites. Any program set up to attack crime and delinquent behavior at their sources. A program of his nature needs the constant and comprehensive collaboration of psychiatrists, social works, educations, lawmakers, and public officials, since crime is a social problem and it should be treated as such. Some crime preventives which should be mentioned are as follows, (1) The insurance that every child will be decently born and that his home life be socially and economically adequate; without socially mature parents the chid is handicapped at the start; thus parental education, integrated with the public school system, should be developed now. (2) A more meaningful educational program which would emphasize ideals of citizenship, moral integrity, and respect for the law and the police. (3) A periodic check made for potential delinquents throughout the public schools and treatment provided if possible; and if not, proper segregation in institutions. (4) Careful attention paid to press, movies, and radio so that crime may no longer appear to be glamorous. This can be done by women's clubs, civic bodies, and other educational groups exerting pressure on the movie syndicates and broadcasting companies to free their productions of the tawdry and lurid characteristics of crime and criminals. Aggression associated with the phallic stage of development, The child ordinarily comprehends sexual intercourse as an aggressive and sadistic act on the part of the male, and specifically on the part of the penis. Evidence that the penis is phantasied as a weapon of violence and destruction come from unconscious productions of normal adults. Limerick, for instance, often refer to the penis as square, or too large, etc., so that intercourse is dangerous and painful for the partner, This may wall be a projection of the male's own fear of coitus. A certain portion of the death-instinct always remains within the person; it is called 'primal sadism' and according to Freud is identical with masochism. 'After the chief part of it(the death instinct) has been directed outwards towards objects, there remains as a residuum within the organism the true erotogenic masochism, which on the one hand becomes a component of the libido and on the other still has the subject itself for a object.' Criminalism, compulsive-neurotic frequent repetition of criminal acts in a compulsive manner. Like most symptoms of the compulsive-neurotic, such antisocial act are closely rated to feelings of hostility and aggression, often against the father. Because these acts are symptomatic, they afford only temporary relief and are therefore repeated. One patient with compulsive-neurotic criminalism was apprehended after breaking into hardware store and stealing money. He later confessed to many similar incidents over the preceding two years. At the same time it was apparent that he stole only for the sake of stealing. He did not need the money he thus obtained and had no special plans for using it.

  • PDF

제초제 Acifluorfen 저항성 세포주 선발 및 분화된 식물체와 그 후대에서의 저항성 발현 (Selection of Acifluorfen-tolerant Eastern Black Nightshade (Solanum ptycanthum Dun) and the Expression of This Tolerance in Regenerated Plants and Their Progeny)

  • Chang Yeon Yu;John B. MASIUNG
    • 식물조직배양학회지
    • /
    • 제21권3호
    • /
    • pp.151-156
    • /
    • 1994
  • 야생약초이며 미국에 자생하는 까마중의 일종인 Solanum ptycanthum을 현탁배양에 의하여 제초제 acifluorfen 저항성인 세포주를 선발하였으며 감수성인 세포주는 $0.5\;\mu\textrm{M}$ 제초제에서 callus 생장이 멈추었으나 저항성 세포주는 $10\;\mu\textrm{M}$이 첨가된 배지에서도 calllus 생장을 계속하였다. 저항성 세포주를 제초제가 첨가 안된 배지에서 4개월 이상 계대배양 후 저항성 정도를 조사하였으며, 저항성 정도는 세포주에 따라 상이하였다. 저항성 세포주로부터 식물체 분화 능력도 세포주에 따라 상이하였으며 저항성인 세포주는 제초제가 첨가된 배지에서도 식물체가 분화되었다. 선발된 세포주로부터 분화된 식물체를 온실에서 5-5주 키운 후 16 mg/L acifluorfen 을 살포한 후 식물체와 자식후대에서의 제초제 저항성을 조사하였다. 내성인 세포주로부터 분화된 식물체가 감수성인 선발이 안된 종자로부터 얻은 식물체보다 저항성을 나타내었다. 저항성 정도는 cell line과 somaclone에 따라 차이를 보였다. 자식후 자식후대에서 저항성분리비를 조사하였는데 EBN-l2E 세포주는 저항성, 중간 저항성, 감수성이 1:2:1로 분리가 일어나서 저항성이 불완전우성을 보였다. EBN-l3B는 감수성과 저항성이 3:1로 분리가 일어나 저항성이 열성이고 감수성이 우성인 것으로 나타났다.

  • PDF

전로슬래그 및 페로니켈슬래그를 혼입한 모르타르의 기초물성 연구 (A Study on the Fundamental Properties of Mortar Mixed with Converter Slag and Ferronickel Slag)

  • 김지석;박언상;안기용;조원정
    • 한국건설순환자원학회논문집
    • /
    • 제9권2호
    • /
    • pp.152-160
    • /
    • 2021
  • 본 연구에서는 건설 산업의 고도화에 따라 대량 발생하는 철강 슬래그 및 페로니켈슬래그의 활용을 위해 모르타르 배합에 혼입하여 실험적 연구를 진행하였다. 물의 흡수율이 낮은 BOF와 표면이 매끄러운 성질을 가진 FNS를 시멘트에 치환하면, 희석효과(dilution effect) 작용으로 플로 값과 응결시간이 증가하였다. 다만, BOF를 표준사 대비 10% 초과하여 혼입할 경우 재료 분리 현상(segregation)이 발생하였고, 이에 다량의 혼입 배합은 실험에서 제외하였다. BOF 잔골재와 FNS 혼입 모르타르는 응결 지연으로 인한 수화열 감소로 종결이 완료된 후 길이변화가 발생하지 않았다. BOF 잔골재를 혼입한 모르타르의 압축강도는 표준사와 시멘트만을 혼입한 모르타르 강도 보다 감소되었지만 FNS와 함께 혼입한 배합의 경우 양생 일이 증가함에 따라 압축강도도 증가하였다. BOF 잔골재를 혼입한 B10F0 및 B10F20 모르타르에서는 수화가 진행되어 BOF 원재료 XRD에서 관찰할 수 있었던 larnite, mayenite, wuestite 클링커는 거의 관찰되지 않았지만, FNS의 낮은 수화 반응성으로 FNS의 클링커는 관찰되었다. 주사전자현미경 분석 결과 수화결정체로 존재하지 않고 수화가 진행 중인 FNS를 확인할 수 있었으며 이를 통해 FNS의 잠재수경성을 확인하였다. FNS를 첨가하지 않은 시편의 경우 BOF 골재가 겔이나 침상결정이 아닌 전체가 괴상으로 존재하였으며, 인산화칼슘(calcium phosphate) 형성을 확인하였다. 다만, 전로슬래그를 혼입할 경우 내부 공극은 밀실함이 다소 저하되었으며, 추후 BOF를 잔골재 또는 건설 재료로 활용할 경우 적정 배합비 선정이 필요할 것으로 판단된다.

금속패드가 Sn계 무연솔더의 저주기 피로저항성에 미치는 영향 (Effects of Surface Finishes on the Low Cycle Fatigue Characteristics of Sn-based Pb-free Solder Joints)

  • 이규오;유진
    • 마이크로전자및패키징학회지
    • /
    • 제10권3호
    • /
    • pp.19-27
    • /
    • 2003
  • 플립칩 전자패키지에서 칩과 기판(PCB)를 연결할 때, 통상적으로 칩쪽은 금속패드/UBM 처리를 기판 쪽은 표면처리를 한 후 솔더로 연결하는데, 이 때 사용되는 UBM이나 표면처리에 따라, 칩/솔더, PCB/솔더에 생성되는 금속간 화합물의 종류와 두께 및 솔더의 조성이 변하게 되어 궁극적으로 솔더 접합부의 기계적 신뢰성에 영향을 주게 된다. 본 연구에서는 Cu와 Au/Ni의 두가지 금속 패드가 무연솔더의 저주기 피로특성에 어떠한 영향을 미치는 지에 대해 고찰해 보았다. 저주기 피로 실험은 Cu나 Au/Ni이 표면처리 된 기판에 무연솔더 (Sn-3.5Ag, Sn-3.5Ag-1.5Cu, Sn-3.5Ag-XBi(X=2.5, 7.5), Sn-0.7Cu)를 리플로하여 총변위를 변화시키면서 상온에서 시행하였다. 기판의 표면처리에 관계없이 Sn-3.5Ag, Sn-3.5Ag-XCu(X-0.75, 1.5), Sn-0.7Cu 합금이 Sn-3.5Ag-7.5Bi 합금보다 피로저항성이 현격히 좋았으며, Au/Ni 표면처리한 솔더 접합부가 Cu 처리한 경우보다 피로저항성이 뛰어난 것으로 나타났다. 파괴 후 단면을 조사한 결과 계면에 형성된 금속간 화합물 내에 미세균열이 발견되었는데, Cu 표면처리를 사용한 경우 더 많은 미세균열이 생성된 것을 볼 수 있었다. Sn-3.5Ag, Sn-3.5Ag-Cu(X=0.75, 1.5), Sn-0.7Cu 합금의 경우 금속간 화합물 내에 생기는 미세 균열이 거시 균열로 성장하지 않고 파단은 항상 솔더 내부로 일어난 반면. Bi를 함유한 솔더의 경우, 기판의 표면처리에 상관없이 금속간 화합물/솔더 계면으로 균열이 생성 진전되어 다른 솔더합금에 비해 열악한 피로저항성을 나타내는 것으로 보인다. 이것은 Bi의 금속간화 합물/솔더 입계 편석이나 Bi 합금이 다른 합금에 비해 높은 경도값을 가지는 것에 인한 것으로 보여 진다.

  • PDF

SLC6A18 유전자의 minisatellites 5 (SLC6A18-MS5)의 고혈압과의 관련성 및 진화적 의미 (Minisatellite 5 of SLC6A18 (SLC6A18-MS5): Relationship to Hypertension and Evolutional Level)

  • 허창환;이상엽;설소영;권정아;정윤희;정정남;선우양일
    • 생명과학회지
    • /
    • 제18권12호
    • /
    • pp.1733-1738
    • /
    • 2008
  • SLC6A18은 neurotransmitter로서 고혈압과 연관성이 보고 되었고, 유전자 내에 총 8개의 minisatellites가 존재함이 밝혀졌다. 본 연구에서 8개 minisatellites 중 가장 높은 heterozygosity를 나타내는 SLC6A18-MS5 영역에 대하여 생물정보학적 방법으로 Transfac software를 이용하여 transcription factor binding site를 분석한 결과, Pax4와 HNF4의 binding site를 발견하였다. HNF4는 당뇨병 대사에 관여하는 것으로 고혈압과의 연관성이 있을 것으로 사료된다. 그러므로 본 연구에서는 SLC6A18-MS5 영역과 고혈압과의 연관성을 조사하기 위하여, 대조군 301명과 고혈압 환자군 184명의 genomic DNA를 이용하여 대립형질의 패턴을 조사하였다. SLC6A18-MS5의 대립형질 분포와 고혈압은 직접적인 영향을 주지 않는 것으로 나타났다. 반면 높은 heterozygosity를 나타내는 SLC6A18-MS5에 친자확인 및 DNA typing 마커로서의 유용성을 알아보기 위해 20가족의 샘플을 이용하여, 감수분열 후 자손에의 분리 형태를 조사한 결과 부모에게서 자손으로 정확히 전달되는 멘델의 법칙에 의해 분리됨을 확인하였다. 또한 SLC6A18 유전자 내의 minisatellites들의 진화적 관계를 조사한 결과, 인간과 원숭이에서만 보존적으로 나타났다. 이러한 결과는 intron영역의 minisatellites 분석이 영장류의 비암호화 영역의 중요한 진화 마커로 사용될 수 있음을 나타내어, 영장류 특이적 진화를 이해하는데 도움이 될 것으로 사료된다.