• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.853-858
• /
• 2001

The PSC bridge being built by ILM may have greater bending moment during its construction rather than after completion. When it occurs, Engineer should suggest to reduce stress-resultants than to make bigger cross-section with considering stability ,economics, and proper span-to-depth ratio. The used method is to install extruded nose at the end of girder. It substitutes the weighted segment for the light. From the reference, the stiffness of extruded nose, is 1/10 of the main girder, and the length is 60 to 70% of the length of the span, with little justification. In this study, the proper length and stiffness of the nose element is determined by the parametric study and idealizing procedure. The results about the extruded nose through the mixing of the parameter of its stiffness and length, the proper length of extruded nose is 80% of the longest span and the proper stiffenss is 13% of the bending stiffness of the superstructure and the proper length of extruded nose is 70% of the longest span and the proper stiffness is 9.5% of the bending stiffness of the superstructure.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.4
• /
• pp.348-356
• /
• 2001

The factors related to relapse in 20 skeletal class III patients who performed two-jaw surgery with Le Fort I maxillary osteotomy and bilateral sagittal split ramus osteotomy was investigated. All patients were fixed with miniplate on the maxilla and three screws at each mandible. Cephalograms taken at preoperative, immediate postoperative and 8 months postoperative after surgery were traced and digitized. 1.The horizontal and vertical relapse of maxilla and mandibular chin points was within 1mm postoperatively. Compare to the preceding report concerning the mandibular set-back surgery only group, this reveals two-jaw surgery for mandibular prognathism using rigid fixation is more stable. 2.Although there was no significant relapse tendancy was observed at chin points, the screw tip land-marks moves anterio-superiorly and each side of the screws moved as a one unit. The screw tip points moved similar direction to the masticatory force and this movements might be influenced by the muscular tension to the distal segment of the mandible. 3.According to the regression analysis, the amount of horizontal and vertical movement of mandibular set-back influenced the mandibular relapse. However, direction and amount of maxillary surgical movement did not inf1uenced the maxillary and mandibular relapse.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.1
• /
• pp.28-38
• /
• 2010

The factors influencing the relapse and recurrence of skeletal deformity after the orthognathic surgery include various factors such as condylar deviation, the amount of mandibular set-back, stretching force by the soft tissues and muscles around the facial skeleton. The purpose of this report is to recognize and analyze the possible factors of reoperation after orthognathic surgery, due to early relapses. Six patients underwent reoperation after the orthognathic surgeries out of 110 patients from 2006 to 2009 were included in this study. In most cases, clincal signs of the insufficient occlusal stability, anterior open bite, and unilateral shifting of the mandible were founded within 2 weeks postoperatively. Although elastic traction was initiated in every case, inadequate correction made reoperation for these cases inevitable. The chief complaints of five cases were the protruded mandible combined with some degree of asymmetric face and in the other one case, it was asymmetric face only. Various factors were considered as a major cause of post-operative instability such as condylar sagging, counter-clockwise rotation of the mandibular segment, soft tissue tension related with asymmetrical mandibular set-back, preoperatively existing temporomandibular disorder (TMD), poor fabrication of the final wafer, and dual bite tendency of the patients.

• The Journal of Korean Physical Therapy
• /
• v.15 no.4
• /
• pp.412-430
• /
• 2003

Functional stability is dependent on integrated local and global muscle function. Movement dysfunction can present as a local and global problem, though both frequently occur together. To good understand how movement induces pain syndrome, the optimal actions and interaction of the multiple anatomic and functional systems involved in motion must be considered. Minor alterations in the precision of movement cause microtrauma and, if allowed to continue, will cause macrotrauma and pain. These alteration of the movement result in the development of compensatory movement and movement impairment. Muscle that become tight tend to pull the body segment to which they are attached, creating postural deviation. The antagonistic muscles may become weak and allow postural deviations due to lack of balanced support. Both hypertonic and inhibited muscles will cause an alteration of the distribution of pressure over the joint(s) that they cross and, thus, may not only result from muscle dysfunction, but produce joint dysfunction as well. Alteration of the shoulder posture and movement dysfunction may sometimes result in compression of neurovascular structures in the shoulder and arm. There is a clear link between reduced proprioceptive input, altered motor unit recruitment and the neurovascular compression. This report start with understanding of the impaired alignment, movement patterns and neuromuscular compression of the shoulder girdle by movement impairment to approach method of the movement dysfunction.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.4
• /
• pp.412-420
• /
• 1991

Seventeen rigid screw fixation and sixteen nonrigid wire fixation cases of mandibular sagittal slit ramus osteotomy were selected to compare postoperative dental and skeletal changes. A constructed horizontal plane was drawn seven degrees under sella-nasion plane and detailed cephalometirc assessment was applied to serial radiographic films taken before surgery($T_0$), immediately after surgery($T_1$), and at least six months after surgery($T_2$). Linear and angular positional changes were measured and analyzed statistically using paired t-test method and percent of positional changes(amount of post-op change/amount of intra-op change)${\times}100$. The results were as follows; 1. It was 29.4% in rigid fixation cases and 37.5% in nonrigid fixation cases comparing the postoperative positional change of more than 2mm at point B. So rigid fixation method was slightly more stable. 2. In nonrigid fixation cases, the positional change might be caused by incomplete bony union at the osteotomy site and soft tissue tension acting on this site. 3. In rigid fixation cases, the positional change might be caused by interaction between relapse tendency of protracted condyle-proximal segment and neighboring soft tissue tension.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.245-251
• /
• 2001

A fretting wear tester is developed for experimental study on the fuel fretting problem of light water reactor. The feature of the developed tester is it can simulate the existence of gap between spring and fuel rod as well as different contacting force including the just-contact condition (0 N on the contact). Used are a servo-motor, an eccentric cylinder and lever mechanism for driving system. A spacer grid cell is constituted with four strap segments (each segment has a spring). This fretting wear tester can also be used as a fatigue tester of a spacer grid spring with the frequency of more than 10 Hz. It is required to simulate the frequency of the vibrating fuel rod due to flow-induced vibration in a reactor. In fretting wear test, up to two span-length of a fuel cladding tube can be accommodated. A specimen of cladding tube of one span-length is specially designed, which can be extended for two-span test. For .fatigue test, a device for clamping the spring fixture is installed additionally, Presently, the tester is designed for the condition of air environment and room temperature. The variation of the reciprocal distance is measured to check the stability of input force, which will be exerted to the cladding (for fretting wear. test) and the spring (for fatigue test) specimen.

• Structural Engineering and Mechanics
• /
• v.40 no.1
• /
• pp.29-48
• /
• 2011

Under large storm loads sections of a long pipeline on the seabed can be uplifted. Numerically this loss of contact is extremely difficult to simulate, but accounting for uplift and any subsequent recontact behaviour is a critical component in pipeline on-bottom stability analysis. A simple method numerically accounting for this uplift and reattachment, while utilising efficient force-resultant models, is provided in this paper. While force-resultant models use a plasticity framework to directly relate the resultant forces on a segment of pipe to the corresponding displacement, their historical development has concentrated on precisely modelling increasing capacity with penetration. In this paper, the emphasis is placed on the description of loss of penetration during uplifting, modelled by 'strain-softening' of the force-resultant yield surface. The proposed method employs uplift and reattachment criteria to determine the pipe uplift and recontact. The pipe node is allowed to become free, and therefore, the resistance to the applied hydrodynamic loads to be redistributed along the pipeline. Without these criteria, a localised failure will be produced and the numerical program will terminate due to singular stiffness matrix. The proposed approach is verified with geotechnical centrifuge results. To further demonstrate the practicability of the proposed method, a computational example of a 1245 m long pipeline subjected to a large storm in conditions typical of offshore North-West Australia is discussed.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.156-164
• /
• 2010

Thermoplastic elastomers (TPEs) exhibit both elastomeric behaviors at used temperature range and melt processibility. Polyamide based thermoplastic elastomers (TPAEs) are segmented block copolymers with hard blocks consisting of polyamide segments, while the soft blocks usually consist of flexible segments having a low glass transition temperature. The TPAE is one of the engineering TPEs possessing high thermal stability, excellent mechanical performances, chemical resistance and excellent processibility. And they showed wide range of physical and functional properties depending upon the structure of each segment and their relative contents and the hybridization with various inorganic particles. In this review, synthesis, properties, and possible applications of TPAEs are summarized.

• Journal of Ceramic Processing Research
• /
• v.20 no.1
• /
• pp.48-53
• /
• 2019

Carbon fiber reinforced SiC composites (C/SiC) have high-temperature stability and excellent thermal shock resistance, and are currently being applied in extreme environments, for example, as aerospace propulsion parts or in high-performance brake systems. However, their low thermal conductivity, compared to metallic materials, are an obstacle to energy efficiency improvements via utilization of regenerative cooling systems. In order to solve this problem, the present study investigated the bonding strength between carbon fiber and matrix material within ceramic matrix composite (CMC) materials, demonstrating the relation between the microstructure and bonding, and showing that the mechanical properties and thermal conductivity may be improved by treatment of the carbon fibers. When fiber surface was treated with a nitric acid solution, the observed segment crack areas within the subsequently generated CMC increased from 6 to 10%; moreover, it was possible to enhance the thermal conductivity from 10.5 to 14 W/m·K, via the same approach. However, fiber surface treatment tends to cause mechanical damage of the final composite material by fiber etching.

• The Journal of Korean Physical Therapy
• /
• v.35 no.2
• /
• pp.37-42
• /
• 2023

Purpose: Compared to cities, rural areas are in a medical blind spot and face difficulties in accessing medical services due to inconvenient transportation facilities, lack of medical facilities, and the heavy burden of medical expenses. This study was carried out to identify the problems relating to the musculoskeletal system of the elderly in rural and fishing villages, which are medically vulnerable areas, and sought to present a regionally differentiated healthcare model. Methods: The study was conducted in 80 elderly people in two rural villages and two fishing villages after seeking inputs regarding medically vulnerable groups in the Gyeongnam Province. Postural balance and muscle flexibility were assessed and postural evaluation was conducted to identify musculoskeletal problems and gait stability. Strength and range of motion for each body segment were assessed for evaluating functional motion. Results: The elderly in both rural areas showed forward head posture characteristics. The strength level of the elderly in both rural areas was higher than the average, but their flexibility and balance ability were lower than the average. Conclusion: The musculoskeletal problems of the elderly in rural and fishing villages in this study did not show regional characteristics according to the area of residence. However, overall flexibility and balance ability appeared to be reduced. Therefore, a new management model connecting the region and the university is necessary in preparation for the coming era of community care.