• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.4
• /
• pp.1-14
• /
• 2015

A manipulation of zoysiagrass's lateral stems and soil-media; used for slope revegetation, is expected to facilitate the production of high-quality grass. To study the influences on the growth of zoysiagrass depending upon various soil-media conditions, two different types of soil are used. The results obtained - through investigation of its cover rates, leaf color and number - are summarized as follows. In mountain regions soil, there are no significant differences in growth and development of grass in treatments: zoysiagrass's lateral stems treatments with 1cm, 2cm, and 3cm soil-media and treatment with only seeding. Zoysiagrass, in most of the treatments, show about the same growth rates, and at the end, fair visual quality. Zoysiagrass's lateral stems treatments with 2cm, 3cm show slightly better growth, however, thickness of soil-media need not be more than 1cm to obtain an expected quality of lawn. In decomposed granite soil, there appears statistical significance in growth of the grass in treatments: zoysiagrass's lateral stems treatments with 1cm, 2cm, and 3cm soil-media and treatment with only seeding. The thicker the soil-media, the better the growth of grass, and that in treatment with seeding-only shows poor quality in general. And therefore, it is efficacious to plant in 3cm soil-media when quick formation of lawn is necessary; however, using 2cm soil-media is ultimately the most cost-efficient way of formation. But, when time allows - that is, more than three months - 1cm soil-media in decomposed granite soil is reasonable to formate just as effective lawn. And so when performing seeding, additional covering, fertilization or increasing the quantity of seed must be considered.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.384-387
• /
• 1999

A new multi-seeding process for the growth of YBa$_2Cu_3O_x$ single crystals was developed. This process introduces an additional heating step to peritectic temperature and a subsequent slow cooling step to the growth temperature following the point when the crystals contacted. The crystal growth was resumed thereafter. The results obtained with this new process were compared with those of the conventional growth process, in which materials were only kept at the growth temperature. There was significant improvement in trapped magnetic field over the conventional multi-seeding process, which is believed to be due to complete elimination of liquid phase between crystals.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.1
• /
• pp.5-18
• /
• 2018

The field trial was performed to evaluate the rice growth and yield in direct seeding cultivation with iron-coated rice seeds. The required time for seed emergence was for 9~11days in the tested direct seeding methods. That was 1~2days earlier in direct seeding with pregerminated seeds than that of direct seeding with iron-coated seeds. The seedling establishment was highest in water seeding with iron-coated seeds but there was not significant difference in terms of statistical analysis. The rice plant height was taller in water seeding with broadcasting method than that of wet hill-seeding methods and in direct seeding with iron-coated seeds than that of direct seeding with pregerminated seeds. The tiller number in the rice plant was the highest in machine transplanting at 30days after direct seeding(June 17) and in water seeding with iron-coated seeds at 45days after seeding(DAS) and 60DAS. The tiller number of 75 and 90DAS in the tested rice cultivation methods being with 352~405/m² was not significantly different in terms of statistical analysis. The heading time was not different in rice direct seeding methods but 2 day earlier in direct seeding with iron-coated seeds than that of direct seeding with pregerminated seeds. The culm length was the highest in water seeding with iron-coated seeds and the panicle length was the longest in wet hill-seeding with pregerminated seeds. The panicle number per m² was highest in water seeding with iron-coated seeds but not significant difference among the tested rice cultivation methods. The water seeding with iron-coated seeds resulted in the highest spikelet number per m² and the heaviest grain weight of brown rice. Percentage of ripened kernel was the highest in wet hill-seeding with iron-coated seeds. But there were not significant among the tested rice cultivation methods. The milled rice yield in direct seeding methods was 3~21% higher than that in machine transplanting. Water seeding with iron-coated seeds recorded the highest milled rice yield being with 6.86t/ha.The occurrence of sheath blight was high according to machine transplanting>wet hill-seeding>water seeding. Weed occurrence was the highest in water seeding with pregerminated seeds. Weedy rice occurred not in machine transplanting but occured 0.6~0.7% in direct seeding methods with pregerminated seeds and 0.1% in direct seeding with iron-coated seeds.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.4
• /
• pp.217-224
• /
• 2001

In order to identify the growth characterization, the yield and chemical composition of Jeju barnyard grass (Echinochloa crusgalli var. fiurnentacea(Roxb) Wight) based on seeding date in Jeju region, seeding carried out the 10-day intervals from March 27 to September 30 in 2000, respectively. Plant height was 143.2 cm, showing the highest on seeding date, April 6 among that of any other seeding date. On the other hand, those of early and late seeding gradually decrease. Plant height was 119.2 an in May 16 seeding. The results of stem diameter, number of withering leaves, number of leaves and fresh weight per plant were similar to those of the plant heights. The yield of fresh, dry matter forage, crude protein and TDN found the highest on April 6 seeding, 63.5 MT/ha, 13.9 MTha, 1.1 MT/ha, and 7.6 MT/ha, respectively. In early and late seeding, the yield was gradually decreased. In seeding May 16, the yield found .38.2 MTIha in fresh forage, 6.2 MTha in dry matter forage, 0.7 MT/ha in crude protein and 3.7 MTha in TDN, respectively. According to delaying the seeding date, March 27 to May 16, the contents of crude protein (from 7.9 to 10.8%), ether extract (from 4.6 to 6.0%), nitrogen free extract (from 45.1 to 46.5%), and TDN (from 54.2 to 60.8%) were gradually increased, respectively. On the other hand, those of crude fiber (from 28.9 to 25.6%) and crud ash (from 13.5 to 11.2%) were decreased. These results showed that April 6 was the optimum seeding date with the sole object of feed production of Jeju barnyard grass under the environmental condition like as atmospheric phenomena and soil in Jeju region. (Key words : Jeju barnyard grass, Seeding date, Forage yield, Chemical composition)

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.49-59
• /
• 2019

The field trial was performed to evaluate the rice growth and yield in different direct seeding methods after Italian Ryegrass Harvest The required time for seed emergence was for 7 ~ 8days in the tested direct seeding methods and there was high in seedling establishment in order of wet hill-seeding with iron-coated seeds > water seeding with iron-coated seeds > wet hill-seeding with soil coverage with pregerminated seeds. The rice plant height was shorter in the tested direct seeding methods than that of machine transplanting until 45day after seeding but there was not significant difference in terms of statistical analysis at 63day after seeding. The growth of tiller number in the rice plant was high in water seeding with iron-coated seeds and wet hill-seeding with soil coverage and low in wet hill-seeding with iron-coated seeds compared to machine transplanting. The yield component in the tested direct seeding methods was not significant difference in terms of statistical analysis. The milled rice yield in the tested direct seeding methods was higher 2 ~ 8% being with 4.94 ~ 5.24t/ha than that of machine transplanting but there was not significant difference in terms of statistical analysis. The percentage of head rice was low in the tested direct seeding methods compared to machine transplanting. The weedy rice was not occurred in the tested rice cultivation methods. In conclusion the direct seeding method would be recommended to be a suitable to in following by Italian ryegrass harvesting in southern area of Korea in terms of reduction in production cost and high income basis for rice growing farmers.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.134-138
• /
• 2011

This study was conducted to evaluate the effects of seeding time of ryegrass+hairy vetch on the nutrient contribution and growth of the crops. in order to develop utilization of cover crops as an organic nutrient source in a pear orchard. The study was conducted at a diligent farmer in Boseong in Chonnam, and the both ryegrass and hairy vetch applied on 1) 27 September, 2) 15 October, 3) 8 November, and 4) 10 December of 2008 as a cover crop treatment. Sod culture was refereed as a control. Growth of ryegrass was not affected by seeding time, but hairy vetch had fewer leaf and shoot number as seeding time advanced from September to December, and the similar trend was observed for the dry weight of the crops by seeding time. Seeding of cover crop on September was 2.6 times greater dry weight than those of the sod culture (362 kg/10a). Higher N concentration in cover crops occurred on early seeding time, and estimated N contribution from the cover crops was 16.9 kg/10a, which was 2.6 times greater than those of sod culture. $P_2O_5$ production from the cover crops was the greatest on seeding of October, and $K_2O$ production increased at earlier seeding time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.251-254
• /
• 1999

A new multi-seeding process for the growth of YBa$_2$Cu$_3$Oxx single crystals was developed. This process introduces an additional heating step to peritectic temperature and a subsequent slow cooling step to the growth temperature following the point when the crystals contacted. The crystal growth was resumed thereafter. The results obtained with this new process were compared with those of the conventional growth process, in which materials were only kept at the growth temperature. It was observed that the liquid phase between crystals were almost completely eliminated, but that Y2ll grains were grown during this new process. There was no significant improvement in trapped magnetic field over the conventional process, which is believed to be due to the cracks generated during the oxygen heat treatment or to the growth of YBa$_2$Cu$_3$Ox grains.

• Korean Journal of Plant Resources
• /
• v.32 no.2
• /
• pp.160-169
• /
• 2019

The this study was carried out to investigate the growth characteristics of wild-simulated ginseng by direct seeding and transplanting cultivation for develop standard cultivation techniques of wild-simulated ginseng. Bonghwa experimental field were confirm to be suitable location environment for cultivation of wild-simulated ginseng. As a result of this study, the germination rate of wild-simulated ginseng was significantly highest when seed size was over 6.5 mm in the spot seeding cultivation. In the case of transplanting, survival rate was significantly increased when the diameter of root was over 10 mm, planting distance was 7 cm, and the thickness of soil covering was less then 2 cm. The result of growth characteristics of wild-simulated ginseng by cultivation type, growth of stem in spot seeding cultivation was showed significantly increased when seed size over 6 mm, seeding number was 3 grains, and the seeding distance was less then 5 cm. Strip seeding cultivation was showed significantly increased in stem and root growth when seeding distance was 30 cm grains and quantity of seeding was less then 23 g. In the case of transplanting cultivation, it's was showed significantly increased in stem growth when diameter of root was over then 10 mm and direction of rhizome was top and bottom. The results of this study was that to clearly establish the techniques of cultivation of managements and it's will be suggest contribute to the industrial activation of wild-simulated ginseng.

• Korean Journal of Plant Resources
• /
• v.18 no.1
• /
• pp.8-14
• /
• 2005

This study was carried out to investigate the possibility of double cropping of safflower(Carthamus tinctotious L.) in vinyl house for rainshield culture. Planting methods, i.e., direct seeding as the first crop and direct seeding and transplanting as the second crop, were investigated. Growth characters and establishment were better in the first crop than in the second crop. Between direct seeding and transplanting of the second crop, growth was not significantly different, but establishment was much higher in direct seeding than in transplanting. Seed yield of the second crop was lower $30\~74\%$ than that of the first crop. In planting methods of the second crop, seed yield was higher in direct seeding than in transplanting. Therefore, optimum method of the second crop for double cropping of safflower in the middle parts of Korea was estimated as direct seeding.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.2
• /
• pp.143-146
• /
• 1991

The present experiment was carried out to investigate the effects of direct sowing time culture of Perilla frutescens var. acuta KUPO on growth yield and it's components. The number of days from seeding to emergence was recognized linear negative correlation between seeding dates. Stem length was the longest in Apr. 1 seeding, and was short in the early, and the late seeding. Stem diameter was the thickest in Apr. 1 seeding, and was thin in the early, and the late seeding. Dry weight of leaf and stem was increased on Apr. 1 seeding. Grain yield was the highest in Apr. 1 seeding date. Therefore, optimum time for direct sowing was on Apr. 1.