• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.4
• /
• pp.225-232
• /
• 2001

In order to identify the optimum seeding rate of Jeju barnyard grass (Echinochloa crusgalli var. fiurnentacea(Roxb) Wight), 15, 20, 25, 30, 35 and 40 kilograms per a hectare were planted in April 16, 2000, respectively. The growth characterization, the yield and chemical composition were then investigated in June 28(1st cutting) and August 30(2nd cutting), 2000. According to increasing the seeding rate, plant height(155.5 to 162 cm), the yield of fresh forage(61 to 73 MT/ha), dry matter forage(11.9 to 16.9 MT/ha), crude protein(0.9 to 1.6 MT/ha), and TDN(6.1 to 9.7 MT/ha) were gradually increased until the seeding furrow, 35 kg/ha. In 40 kg/ha of seeding furrow, however, those results were decreased than that of the former seeding furrow. The contents of crude protein(7.4 to 10.4%), ether extract(3.3 to 5.2%), nitrogen free extract(46.4 to 47.8%), and TDN(52.1 to 60.4%) were also similar to those of the plant heights and the each yield excepted the seeding furrow, 40 kg/ha. Namely, the each results about the contents increased in 40kg/ha of seeding furrow. According to increasing the seeding rate, the stem diameter, number of leaves, number of withering leaves, and fresh weight were gradually decreased. The contents of crude fiber(30.3 to 27.5%) and crude ash(12.7 to 9.0%) were also decreased These results showed that the optimum seeding rate for the best of the feed production was the seeding furrow, 35 kg/ha.

• Korean Journal of Animal Reproduction
• /
• v.12 no.2
• /
• pp.84-90
• /
• 1988

This study was done with mouse embryos to determine effects of the freezing media with or without 10% sucrose, and seeding methods (pincette, no seeding, liquid nitrogen gas phase and copper wire coiled straw) on embryo survival were determined using the FDA test. The summarized results are the following. 1. The FDA score found with copper wire coiled straw, no seeding, pincette and liquid nitrogen gas phase was 3.6, 3.6, 3.3 and 3.0, respectively. There were no significant differences. 2. The embryo score shows higher (P<0.05) survival rate using a freezing medium with sucrose than the one without it. Among the seeding procedure, better resutls are copper wire coiled straw and no seeded. 3. The results suggest that copper wire coiled seeding no seeding be as good as seeding when the mouse embryos were frozen in a liquid nitrogen container using both the freezing and dilution media containing 10% sucrose.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.129-129
• /
• 2022

The production area of Italian ryegrass feed is gradually increasing and labor-saving technologies are being developed. If sowing and fertilization are carried out agricultural drones, working hours and labor are reduced. The purpose of this study is to suggest an appropriate seedling amount for feed production by drone spreading of Italian ryegrass in spring. In addition, we would like to review the productivity of the drone seeding machine that is being developed by Rural Development Administration(RDA) of Korea. Italian ryegrass was sown by a drone in February at the NICS located in Gyehwa-hwa, Jeollabuk-do, South Korea. In Experiment 1, 50kg/ha, 60, 70, and 80 seeding rates were sown with a horizontal spreader drone. In Experiment 2, uniform spreaders type drone and horizontal spreader type were sown with the same seeding amount and compared. The drone was sown using the AF-52 aircraft. The higher the seeding amount, the higher the emergence rate. As the seeding amount increased, the plant length increased, but the number of tillers per individual decreased. The dry matter weight of the feed was the highest at 1,326kg/10a at the seeding rate of 70kg/ha, and decreased by 20.5% at the seeding rate of 80kg/ha. The coverage ratio was the highest at 96 at the seeding rate of 70kg/ha, which was the most advantageous for spring sowing. In the comparative experiment according to the spreader type, the uniform spreader had a high emergence rate per unit area. When the uniform spreader was used, the dry matter weight of the feed was 17% higher than that of the horizontal one, and the coverage was about 5% higher.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.4
• /
• pp.340-343
• /
• 2016

The present study investigated the effects of different seeding rates on growth characteristics and seed productivity of the "Kowinearly" cultivar of Italian ryegrass (Lolium multiflorum Lam.) in paddy fields. Sowing Kowinearly in paddy fields under growing rice at the rates of 20, 30, 40, and 50 kg/ha resulted in seed yields of 1.57, 1.92, 2.06, and 2.09 ton/ha, respectively. Seed yield of Kowinearly was the highest at a seeding rate of 50 kg/ha (p<0.05), at which the cultivar was able to survive in winter and the weed ratio was low. Under these conditions, most growth characteristics such as winter survival (85%), weed ratio (10%), stems per square meter (1,006) were superior than those sown at other seeding rates (p<0.05). In addition, it has been reported that the economic efficiency of the 50 kg/ha seeding rate was higher than that of the other seeding rates.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.2
• /
• pp.75-80
• /
• 2001

This study was conducted to identify the optimum proper nitrogen (N) application rate for tillering in ridge direct seeding on dry paddy of rice culture. During 1998, a series of experiments was carried out at paddy field (Chonbuk series) of the National Honam Agricultural Experiment Station, RDA using Dongjinbyeo. Leaf area index and top dry weight increased with higher N levels, especially in the 100 kg/ha seeding rate compared with the 60 kg/ha seeding rate. N use efficiency increased at increased by 50~75% of the N topdressing rate at tillering. Heading date, ripened grain rate, and 1,000-grain weight of brown rice did not vary among the rate of topdressing for tillering and seeding rates. The highest grain number per unit area was at the level of increased by 75% in N topdressing at tillering stage. Milled rice yield increased 5% at the 60 kg/ha seeding rate and increased 16~17% at the 100 kg/ha seeding rate at increased by 50~75% of topdressing N compared with 48 kg/ha topdressed N of 60 kg/ha seeding rate.

• Journal of Biosystems Engineering
• /
• v.25 no.5
• /
• pp.351-358
• /
• 2000

This study was conducted to develop a speed control system of a DC motor which drove a barley seeder mounted on a combine harvester. Barley seeder mounted on a combine has been known to reduce labor and cost of barley cultivation. However, development of the seeder has been unsuccessful because the combine, a dedicated rice and barley harvester has not enough space and proper power take-off for barley seeder. To develop a barley seeder, small powered motor speed controller was required. A proximity sensor for detecting working speed of the combine and a programmable one board microprocessor was used to develope a control system. Motor parameters and motor constant, relationship between seeding rate, motor speed, groove volumes of a tested roller, torque were measured. The proximity sensor sent a frequency signal to the microprocessor. In laboratory experiments, the excitation voltage of the motor was shown not to be proportional to the size of pulse width (duty ratio). A table transforming frequency signal, that represented for working speed to proper pulse width was developed from seeding rate experiments. However, seeding rate at low frequency signal was not proportional to the working speed. Seeding rate control proportional to the frequency signal was achieved by shifting of the frequency signal.

• Korean Journal of Plant Resources
• /
• v.19 no.3
• /
• pp.401-404
• /
• 2006

In order to select the seeding machine for mechanizing cultivation of rapeseed in southern areas of Korea, three different seeding machines, ridge rotary, power tiller ridge rotary, tractor ridge rotary were used for sowing one of the high yielding rapeseed cv. Hybrid with five different seeding methods. Seeding of ridge rotary was reduced the seeding effort with 45% and yield components such as plant height, ear length, number of branches and pods, pod length and seed setting rate were higher. The seeding of ridge rotary also was showed highest seed yield. On the basis of time requirement for seeding, vegetative and yield parameters ridge rotary seeding machine was a suitable seeding machine for rapeseed cultivation at the southern area of Korea.

• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.525-530
• /
• 2003

This study was carried out to develop a vacuum nozzle seeder for the automation of large seeds sowing of fruit vegetables and rootstocks. Moreover, the seeding efficiency was examined to find the optimum operating condition considering high precision seeding. The important operating factors for high seeding rate were typically nozzle diameter and absorbing vacuum pressure. The optimum nozzle diameters were found 1.5, 1.5 and 2.0 mm for Chambak, Tuktozwa and Hukjong while the optimum vacuum pressures were 8.0㎪, 10.6㎪ and 5.3㎪, respectively. Under the optimum operating condition, the results indicated that the maximum seeding rates were 97.6％, 98.8％ and 97.6％ respectively for Chambak Tuktozwa and Hukjong. The vibrating acceleration of the hopper did not make any significant effects on the seeding rate when the vacuum pressure reached 8.0㎪ and the sowing rate became higher with lighter seed. As the seed became heavier, the larger diameter of nozzle was recommended 1.5mm of the nozzle diameter was found to be applied for the experimental seeds. The vacuum pressure was also found 8.0㎪ - 13.3㎪ at that time.

• Journal of Biosystems Engineering
• /
• v.42 no.3
• /
• pp.147-154
• /
• 2017

Purpose: To reduce the costs of potato seeds and labor of workers, a fully automatic in-situ seeding machine for cutting seed potatoes was developed. Methods: An experiment was conducted to evaluate the seeder performance of the prototype of potato planter by cutting seeds in farmlands from March to April 2017. The study tested the seeder performance at working speeds ranging from 0.28 to 0.45 m/s. The seeding rate and seeding distance were also investigated according to the planned distance between planted seeds from 20 to 30 cm, with 5 cm intervals. Results: Tests on the performance of the developed cutting blade on the automatic potato seeder show that whole potatoes should be used instead of half potatoes. The seeding rates were 88.8% and 82.5% for whole and half potatoes, respectively. When the tractor working speed was increased from 0.28 to 0.45 m/s, the successful seeding rate decreased from 98.8% to 96.3%, respectively. However, with planted seed distances of 20, 25, and 30 cm, the successful seeding rates were near 98%. Conclusions: The developed automatic potato seeder can to improve the labor productivity and cultivation environment of potato farms by the mechanization of the seeding process, which is currently associated with high-labor, -costs, and -hours. Therefore, based on this study, the developed automatic potato seeder provides the mechanization necessary for improved potato cultivation conditions in farmlands.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.4 no.1
• /
• pp.62-69
• /
• 1983

This experiment was carried out to find the effect of seeding rates and herbicides on the weed control, yield and crude protein of sorghum-sudangrass hybrid (Sorghum bicolor (L.) Moench). The variety used in the present study was Pioneer 988. Two different seeding rates were 25 kg/ha and 50 kg/ha and five weed control treatments were weedy check, hand weeded check, alachlor, alachlor+simazine, and simazine of preemergence application. The results of this study are summarized as follows: 1. Forage yield was not influenced by seeding rates. There was no significant difference between forage yield from 25 kg/ha and from 50 kg/ha of seeding rates. But weedy plots showed higher yield from the high seeding rate. Alachlor+simazine treatment showed the greatest yield among the weed control treatments. But there was no difference among the hand weeded treatment, simazine treatment, and alachlor+simazine treatment. 2. Seeding rates did not affect weed yield, but weedy plots showed the tendancy toward higher weed yield from the low seeding rate. Alachlor+simazing preemergence application showed the most effective weed control. But there was no significant difference in weed yield among the treatments of the hand weeded, alachlor+simazine and simazine. The weed yield in alachlor treatment was significantly higher than other three treatments. 3. The height of plant was shortest on the weedy plots and the longest height was obtained from the alachlor+simazine application. But in the first harvest the height was reduced by herbicides. Seeding rates did not affect the plant height. But the height was slightly taller under the low seeding rate than under the high seeding rate. 4. The percent crude protein of the forage did not affected by two seeding rates. Simazine treatments increased the percent crude protein and total crude protein yield. Simazine and alachlor+simazine application showed the significantly higher percent crude protein than hand weeded and alachlor treatments. Simazine increased the percent crude protein without reduction of forage yield. 5. Whereas the number of original stand was greater in the high seeding rate, the number of tillers per stand was higher in the low seeding rate. Weed reduced the number of stands and tillers. There was no significant indifference among the weed control treatments. It is concluded from above results that when sorghum-sudangrass hybrids are broadcasted for forage, 25 kg/ha rate of seeding is appropriate and alachlor+simazine treatment is most effective on weed control, maximum forage yield, and high percent crude protein.