• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.5
• /
• pp.495-501
• /
• 1994

This experiment was carried out to investigate the proper seeding methed for direct seeding culture of rice in puddled soil at ill-drained paddy field. Mangeumbyeo was seeded on May 11 with drill seeder attached to cultivater, dibbling seeder attached to transplanter and power dust blower. And to determine the proper flooding time after seeding, Mangeumbyeo was seeded on May 7 and June 1 with drill seeder. Emergence ratio wasn't significantly different between drill seeder seeding and dibbling seeder seeding but emergence was very low with power dust blower. Working hour for seeding was shortened in the order of power dust blower, drill seeder and dibbling seeder, and these seeding methods saved the working hour remarkably compared with machine transplanting of infant seedling by omitting the procedures of raising seedling and transplanting. Lodging occurred slightly in all seeding methods. However, yield wasn't significantly different between machine transplanting of infant seeding and direct seeding culture in puddled soil except power dust blower. When field was flooded on seeding date, the emergence period was shortened, emergence ratio was increased and weed occurrence was decreased. Yield was highest when flooding was done on seeding date as the number of panicle per m$^2$ and the number of spikelets per m$^2$ were higher than any other flooding time.

• Korean Journal of Agricultural Science
• /
• v.41 no.4
• /
• pp.259-264
• /
• 2014

This research was conducted to find design factors of seed metering device for developing seeder. It can be sowed precisely 1~3 seeds of Foxtail millet & Sorghum. To obtain fundamental information for designing seed metering device, we conducted adaptability test of the existing seeder in Foxtail millet & Sorghum. Major findings were as followings. Except of Model-A which was adapted sorghum(by seeding metering cup of width 3.9mm and length 4.5mm), seeders which were used in experiment showed that high value of miss-planted rates and more than four-planted rates. So to enhance precision of seeding in Foxtail millet & Sorghum, existing seeders were considered necessary by some supplementation.

• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.395-402
• /
• 2003

Standard ginseng seedling, selected after one year's rearing in the seedling bed has been conventionally transplanted in Korea. Recently, the direct seeding areas have been increasing to product high quality ginsengs for red-ginseng processing. Reciprocating push-rod brush, holed-roller and vacuum suction seeders, planting with 30 ${\times}$ 30mm spacings and adjustable to the folds were designed and theirs performances were evaluated. The developed three types of seeders reliably performed at the success rate over 95% with less than 10% in slip rate, and could be used a seeder for the greater spacings by adjusting metering parts. The research concluded that the vacuum suction seeder was the most feasible and practical with the greatest metering success and the least slip among three type seeders of the reciprocating push-rod brush, holed-roller and vacuum suction seeders. The vacuum suction seeder holds a seed with each needle nozzle using the negative pressure created by a vacuum pump. The capacity was 24.5 times greater than a man power at the speed of 5 m/min.

• Journal of Biosystems Engineering
• /
• v.36 no.6
• /
• pp.434-443
• /
• 2011

A large scale seeding system was stable in terms of techniques but a convenient seeding system of small size was unsettled. This study was performed to develop a semi-automatic seeder for small and medium sized scale farm. To investigate optimum needle diameter and vacuum pressure was used vacuum suction needle seeder. Although the needle diameter according to the kinds of seed was different, the needle diameter for salvia and lettuce seed was suitable for 0.34 mm needle nozzle and 0.4 mm taper nozzle. The prototype consisted a seeding frame attached with needle nozzle, seed hopper, vibrating device, seeding part, vacuum ejector, seed tube etc.. As the result with the experiments, the seeding rate of the seeder was 92% and more at 0.34 mm diameter needle nozzle and 0.4 mm taper nozzle. Eccentric weight for seed hopper vibration was suitable that weight is 11 g and eccentric distance is 0.5 mm. Vibration acceleration of upward direction was 0.363 m/$s^2$. Working capacity of the seeder was possible 160 trays per hour. It was possible for sowing small seeds but it was required to make compact and simple model.

• Journal of Biosystems Engineering
• /
• v.35 no.5
• /
• pp.330-335
• /
• 2010

Soybean (Glycine max Merr.) and corn (Zea mays L.) transplanting has increased because soybean and corn crops cultivated by the direct seeding method were often damaged by wild birds. The purpose of this study is to develop a seeder to sow soybean (Glycine max Merr.) and corn (Zea mays L.) in a plug tray. In order to find out design factors for a metering device of the seeder, metering characteristics on metering hole size and roller speed were experimentally investigated. Soybean (cv. 'Daewon') and corn (cv. 'Mibaekchal') were used as a materials for testing the seeder in this experiment. The metering hole size of roller suitable for Daewonkong and Mibaekchal was determined. Daewonkong was suitable for hole diameter of 10 mm and hole depth of 5.5 mm, and Mibaekcal was suitable for hole diameter of 9 mm and hole depth of 5.5 mm. At a brush length of 4 mm, one grain seeding rates of Daewonkong and Mibaekchal was 99% and 93% respectively. By inducing Mibaekchal to the hole by swing, one grain seeding rate of that increased from 91.9% to 97.7%. When roller speed is 4 m per minut, seeding efficiency of prototype was 110 sheets per hour.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.1009-1020
• /
• 1996

Direct-seeded rice can have comparable yield with transplanted rice if its inherent problems can be solved. It is a labor-saving technology and can significantly reduce production cost because seedling nursery , pulling , and transplanting are omitted. Turnaround time between cropping is reduced hence the possibility of a third annual crop. But direct-seeded rice is very vulnerable to pest attack (by birds, rats, and golden snails), desiccation, weed infestation, and prone to lodging resulting to unstable crop establishment and inconsistent yield. These problems can be solved by anaerobic seeding (sowing pre-germinated seeds under the soil). It requires precise seed placement into the soil to optimize its benefits. We developed a four-row anaerobic direct seeder (US $ 200 commercial price) for this purpose . It consist of a structural framework mounted with a drum -hopper metering device, flotation type drivewheels, spring-loaded and adjustable furrow closers, and furrow open rs, and a plastic rainguard. It can sow in line pre-germinated seeds into the soil thus permitting the use of mechanical weeders for a chemical-free weed control. Its performance was comparable with the Japanese two-row anaerobic seeder (costing US$400) in terms of seed placement and crop establishment. It was tested with five cultivars. Seeding rate varied from 38 kg/ha to 80kg/ha. Crop establishment ranged from 64 to 99 percent while grain yield varied from 3.0 t/ha to 5.4t/ha. A six-row anaerobic seeder was also developed and adapted to a powertiller for increased capacity , field efficiency , and easier operation. The anaerobic seeder is useful to farmers shifting to direct seeding to reduce rice production cost and to researchers conducting agronomic studies in direct-seeded rice. Blueprint of the machine is available free of charge from IRRI.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.154-161
• /
• 2000

A series of soil bin experiment was carried to investigate the effects of rotary blade shape, rotational direction of rotary blade, number of blade and soil cutting disk blade on the characteristics of partial tillage. Among the three types of rotary blades, rotary blade for cultivator was considered to be proper for partial tillage of direct seeder considering the torque requirements and ratio of soil breaking. There is no need to attach so many blades to the rotary shaft. Four rotary blades were enough for efficient partial tillage by rotary tiller. Though soil cutting disk blade assisted the better formation of seedbed furrow, attachment of the soil cutting disk blade increased torque requirements.

• Journal of Biosystems Engineering
• /
• v.34 no.3
• /
• pp.147-154
• /
• 2009

Suitable rapeseed cultivation techniques of domestic agriculture are essential for stable security, supply and demand of rapeseed. This research developed a rapeseed seeder for bio-diesel and analyzed the seeding performance improving an existent granule fertilizer applicator. The relational expression of metering groove size and discharge rate per time displayed high correlation with a coefficient of determination of 0.988. Also, the scattering types were analyzed by forwarding speed and discharge rate. Validity application width was decided as 7.0 m by analyzing application uniformity at application widths of 7.6 m, 6.6 m, 5.6 m. All average coefficients of variation values were less than 20%. The best application uniformity was obtained in the condition of a work speed of 1.3 m/s and a sowing rate of 19.0 g/s. It was better average coefficient of variation values under 10% at superposition application of rapeseed seeder. Also, scattering amount rates of right and left were within 0.89${\sim}$1.0.

• Journal of Biosystems Engineering
• /
• v.33 no.3
• /
• pp.179-185
• /
• 2008

The seeding rates of the vacuum suction nozzle seeders are affected by the jumping height of the seeds on the vibrating seed hopper. This study was performed to investigate the optimum vibration condition of the seed hopper on the vacuum suction nozzle seeder for improving seeding performance. Experiments were carried out to determine the vibration conditions of the seed hopper by air pressure and eccentric weight, and to optimize the seed-pickup performance of each nozzle by suction pressure. As the result with the experiments, the fluctuations of the jumping height of the seeds were showed at amplitude 0.4 mm and frequency 42 Hz, and jumping heights of the seeds were increased as the air pressure increase and the eccentric weight decrease, regardless number of seeds of the hopper. The best seeding rate of the seed hopper was 98% at the 300-seed cell, when the condition of the seed hopper was the suction air pressure of 94.6 kPa-abs., amplitude and frequency of the seed hopper vibration were at 0.57 mm and 43.6 Hz, respectively. The optimum vibrating conditions of the seed hopper were decided into frequency 43.6-43.8 Hz and the amplitudes 0.61-0.62 mm.

• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.525-530
• /
• 2003

This study was carried out to develop a vacuum nozzle seeder for the automation of large seeds sowing of fruit vegetables and rootstocks. Moreover, the seeding efficiency was examined to find the optimum operating condition considering high precision seeding. The important operating factors for high seeding rate were typically nozzle diameter and absorbing vacuum pressure. The optimum nozzle diameters were found 1.5, 1.5 and 2.0 mm for Chambak, Tuktozwa and Hukjong while the optimum vacuum pressures were 8.0㎪, 10.6㎪ and 5.3㎪, respectively. Under the optimum operating condition, the results indicated that the maximum seeding rates were 97.6％, 98.8％ and 97.6％ respectively for Chambak Tuktozwa and Hukjong. The vibrating acceleration of the hopper did not make any significant effects on the seeding rate when the vacuum pressure reached 8.0㎪ and the sowing rate became higher with lighter seed. As the seed became heavier, the larger diameter of nozzle was recommended 1.5mm of the nozzle diameter was found to be applied for the experimental seeds. The vacuum pressure was also found 8.0㎪ - 13.3㎪ at that time.