• 한국자원식물학회지
• /
• 제22권6호
• /
• pp.535-539
• /
• 2009

The time of seed collection is regarded as one of major concerns to obtain sound seeds. The physical and germinal aspects of Cryptomeria japonica D. Don (Taxodiaceae) seeds were analyzed to determine the optimum harvesting time in Korea. Cones were picked every 10 days from the $30^{th}$ of July to the $30^{th}$ of October in both 2005 and 2006. Seeds were collected from picked cones. Seed size and weight were not significant in two consecutive years. The 1,000-seed weight was 3.3 g for cones picked at the $18^{th}$ of August and 5.3 g for cones picked at the $30^{th}$ of September. The size of seeds was increased as the time of collection from the $18^{th}$ of August to the $30^{th}$ of September: from 19.3 mm to 21.3 mm in length and from 15.8 mm to 18.5 mm in width. Average germination rates in 2005 was 18.3% and 19.6% in 2006. The highest germination rate was 34.3% from seeds collected at the $30^{th}$ of September in 2005. In 2006, the highest germination rate was 31.7% for seeds collected at the same date as the 2005 seeds. After the end of September, germination rate was decreased in both years. The results implied that the best cone picking time for Korean C. japonica seeds is around the end of September.

• 한국육종학회지
• /
• 제43권4호
• /
• pp.311-317
• /
• 2011

이 실험은 다양한 크기의 종자로부터 콩나물을 키우고 콩나물의 생장 및 물리적 특성으로 조사함으로써 나물콩 품종육성과 나물콩 품질평가를 위한 기초자료를 얻고자 수행되었다. 대립 및 중소립 재배종 각각 3품종, 야생종과 재배종 교잡종 소립 3품종, 극소립 야생콩 3계통을 공시하여 4일간 콩나물을 키운 뒤 생육특성과 콩나물의 물성을 조사하였다. 콩나물 재배 96시간 후 배축 길이는 품종간 차이가 컸는데 황금콩, 풍산나물콩 및 소영이 가장 길었으며 극소립인 야생콩 계통들이 짧았다. 특히 대립종인 황금콩은 72시간까지 소립 나물콩 품종들과 비슷하게 생장하였으며 96시간 후에는 15.9 cm로 가장 길었다. 극소립 야생종계통은 재배 48시간 후부터 72시간 사이에 급격하게 증가하였으며 원료콩 1 g당 생장량도 월등히 많았으나 다른 품종들은 비슷한 증가양상을 보였다. 재배 96시간 후 단위 종자당 콩나물 생체중 증가비율은 소립일수록 컸으며 콩나물 수율도 소립종일수록 높은 경향을 보였다. 생체 배축의 hardness는 장엽콩이 3,505 g으로 가장 컸고 야생종 YWS516이 1,750 g으로 가장 낮았다. Mastication는 태광콩이 1,650 g으로 가장 높았으며 YWS516이 1,079g으로 가장 낮았으며 배축의 cutting force는 은하콩이 133 g으로 가장 크고 YWS516이 51 g으로 가장 낮았다. 익힌 후의 cutting force는 모든 품종에서 증가하였는데 전체적으로 종자크기가 클수록 물성특성이 증가하는 것으로 나타났다. 배축의 breaking force는 장엽콩이 83.5 g로 가장 컸고 야생콩이 가장 낮아 종자크기가 클 수록 증가하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.87-92
• /
• 1989

We fabricated primary and secondary seed grains. Primary seed grains having larger grain size were obtained under the conditions that were 2.0m/o BaCO$_3$ and 10 hours sintering. The amount of primary seed grain to yield the largest secondary seed grains were choosed as 3 w/o and we fabricated the low voltage varistors which were joined the low voltage-oriented ZnO varistor system made by conventional method with the secondary seed grains. As a result, ZnO varistor showed appoximately 10V/mm of nonlinear resistance and 15-22 of nonlinear exponent.

• 한국분말재료학회지
• /
• 제20권1호
• /
• pp.37-42
• /
• 2013

$YAG:Ce^{3+}$ phosphor powders were synthesized using a $Al_2O_3$ seed (average particle size: 5 ${\mu}m$) by the polymer solution route. PVA solution was added to the sol precursors consisting of the seed powder and metal nitrate salts for homogeneous mixing in atomic scale. All dried precursor gels were calcined at $500^{\circ}C$ and then heated at $1400^{\circ}C{\sim}1500^{\circ}C$ in $N_2/H_2$ atmosphere. The final powders were characterized by using XRD, SEM, PSA, PL and PKG test. All synthesized powders were crystallized to YAG phase without intermediate phases of YAM or YAP. The phosphor properties and morphologies of the synthesized powders were strongly dependent on the PVA content. Finally, the synthesized $YAG:Ce^{3+}$ phosphor powder heated at $1500^{\circ}C$, which is prepared from 12:1 PVA content and has an average particle size of 15 ${\mu}m$, showed similar phosphor properties to a commercial phosphor powder.

• 한국결정성장학회지
• /
• 제9권4호
• /
• pp.371-376
• /
• 1999

A large NaX type zeolite crystal of a uniform particle size of 20$\mu\textrm{m}$ are grown with various {{{{{H}_{2}O}}}} content by hydrothermal reaction and added seed crystal (2~3$\mu\textrm{m}$) to reactant solution as a function of different adding seed levels from 3 to 15%. The result that increased purity of NaX zeolite above 95% and homogeneity of crystal size by increasing adding seed levels, also decreased crystallization time. It was explained that adding seed to synthesis solution leaded out increase of surface area for physical contact reaction and directed growth of seed crystal, so more rapid consumption of reaction gel as increase seeding levels.

• Agricultural and Biosystems Engineering
• /
• 제6권2호
• /
• pp.70-76
• /
• 2005

Seed, stem and sprout of F. tataricum were separately milled using the ultra fine mill under the same condition to investigate the effect of roasting or extruding on the particle size, microstructure and water solubility of dietary fiber. The mean particle size of MR (roasting) is increased in stem and sprout, and that of ME (extruding) is increased in seed, compared to that of control. The microscopic views of seed show that control has the spherical shape but ME the larger and irregular shape, and those of stem and sprout show that control has the needle like shape but ME more rounded shape. Water solubility index of ME is much higher than that of control or MR in seed, stem and sprout. It shows that seed, stem and sprout are damaged more in extruding than in roasting, and the starch and cell wall structure must be destroyed to change the water insoluble dietary fiber into the water soluble dietary fiber.

• 한국연초학회지
• /
• 제22권1호
• /
• pp.45-50
• /
• 2000

In order to improve the sowing practice, pelleted seeds of tobacco NC 82(Nicotiana tobacco L.) were manufactured in use of binders at the different levels of viscosity, and their physical properties according to pellet size and biological activity in seed germination were investigated while storage time elapsed. Proper range of the binder viscosity for the pellet formation was 20.3-37.2 m.pas. At the high level of viscosity(45.7 m.pas) took longer time to form the pellet and pelleting was not easy. The high binder viscosity and large pellet size revealed higher level in hardness of the pelleted tobacco seeds, which caused the longer splitting time of pellets in water. High level of binder viscosity(37.2 m.pas) in pelleted seeds led to decrease the biological activity of tobacco seed germination by the storage at 4 t over 30 days. But at the level of 20.3m.pas in binder viscosity, the germination of pelleted seeds was little affected by the long storage time to 120 days.

• ALGAE
• /
• 제28권4호
• /
• pp.365-369
• /
• 2013

The objective of this study was to determine the optimal blade size and timing to transplant seed-stock of Ecklonia cava Kjellman onto the reef structure. We used the modified artificial stepped reef structure. A total of 14 units (3.0 m length ${\times}$ 3.5 m width ${\times}$ 1.1 m height) were deployed 7-8 m deep under the water to examine the optimal blade size and timing to transplant seed-stock of E. cava onto the structures. Sporophytes of E. cava <1 cm in length were all died within 1 month of transplantation. The blades of 5-10 cm in length which were transplanted in March 2007 survived and grew well on the artificial reefs. Growth rates of 5-10 cm size class were higher than those of longer blade sporophytes (20-30 cm size class, transplanted in April) while the survival rates showed no difference between the classes of blade size. Both classes of 5-10 and 20-30 cm in length grew until July, and a reduction in size had occurred in September. These results indicate the importance of the blade size of E. cava and timing for successful transplantation of the seaweed on artificial reef structures.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권5호
• /
• pp.97-110
• /
• 1992

Rape-seed oil has high viscosity and high rubber content like other vegetable oils. When crude rape-seed oil obtained by a general oil extraction process is used in a diesel engine, automization condition during injection is not good and a large amount of combustion product is doposited in a combustion chamber. The improvement of a diesel engine is required to use rape-seed oil as a diesel engine fuel. In this study, the physical and chemical properties and combustion characteristics of rape-seed oil were investigated. The auxiliary aid was developed to improve automization condition and the effect of the auxiliary injection aid on the performance of a diesel engine was determined. The results are as follows. 1) Oil content of rape-seed is 45%. The exraction rate is 33%. The resuls show higher values compared to those of other vegetable oils. 2) The viscosity of rape-seed oil is 50.8 cSt and nearly 14 times of diesel oil viscosity. 3) The heating value and flash point of rape-seed oil are 9720kcal/Kg and 318$^{\circ}C$, respectively. 4) In case rape-seed oil is used as fuel, brake horse power, specific fuel consumption and brake thermal efficiency are compared to those of diesel oil. The results of rape-seed oil show 3.6%, 12.7% and 3.1% higher values. 5) Particle size of injection fuel with the auxiliary injection aid on the performance of a diesel engine was determined. The results are as follows. 1) Oil content of rape-seed is 45%. The extraction rate is 33%. The results show higher values compared to those of other vegetable oils. 2) The viscosity of rape-seed oil is 50.8 cSt and nearly 14 times of diesel oil viscosity. 3) The heating value and flash point of rape-seed oil are 9720kcal/Kg and 318.deg.C, respectively. 4) In case rape-seed oil is used as fuel, brake horse power, specific fuel consumption and brake thermal efficiency are compared to theose of diesel oil. The results of rape-seed oil show 3.6%, 12.7% and 3.1% higher values. 5) Particle size of injection fuel with the auxiliary injection aids is 100.mu.m smaller than that od injection fuel without the aid. 6) Brake horse power and brake thermal efficiency with the auxiliary injection aid increase 5.07% and 6.07%, respectively. However, specific fuel consumption decreases 3.85% with the auxiliary injection aid.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권4호
• /
• pp.307-311
• /
• 2004

This paper presents an efficient architecture that optimizes the design of SEED S-box using composite field arithmetic. SEED is the Korean standard 128-bit block cipher algorithm developed by Korea Information Security Agency. The nonlinear function S-box is the most costly operation in terms. of size and power consumption, taking up more than 30% of the entire SEED circuit. Therefore the S-box design can become a crucial factor when implemented in systems where resources are limited such as smart cards. In this paper, we transform elements in $GF(2^8)$ to composite field $GF(((2^2)^2)^2)$ where more efficient computations can be implemented and transform the computed result back to $GF(2^8)$. This technique reduces the S-box portion to 15% and the entire SEED algorithm can be implemented at 8,700 gates using Samsung smart card CMOS technology.