• Journal of Biosystems Engineering
• /
• v.26 no.2
• /
• pp.115-122
• /
• 2001

An impact-type seed-metering device was developed for the planting of rice-pellets. In this study, new design of pellet-metering device focused on simplicity and precision seeding for the planting of rice-seed pellets. In addition of seed-metering device, several devices were also developed such as seed-guiding device, seed-supplying tube and furrow opener for precision pellet planting. Field test was conducted to estimate the planting performance of the developed metering device. As a cam rotates, the impact bar of the metering device pushes a rice-seed pellet so that the seed can be discharged from the seed-supplying tube in the impact-type seed-metering device. Results of the tests showed that mean seeding spacing was 12cm at the traveling speed of 1.0m/s, corresponding to a target spacing for planting of rice-seed pellets. Also, both miss-seeded rate and damaged-seed rate were less than 2.0%, indicating acceptable levels for the precision planting. The developed mechanism of the impact-type metering device can be directly applied to the design of metering devices for the precision pellet planting of other crops.

• Journal of Biosystems Engineering
• /
• v.30 no.5 s.112
• /
• pp.261-267
• /
• 2005

In order to save labor and cost, direct seeding has been considered as an important alternative to the machine transplanting in rice cultivation. As current seeders for direct seeding of rice seeds drill irregular amount of seeds under various operating conditions, conventional drilling should be turned to precision planting which enables accurate placement of proper amount of rice seeds at equal intervals within rows. In this study, design, construction and performance evaluation of a precision seed metering device for planting of rice seeds were carried out. As prototype, the conventional roller type seed metering device was modified for planting: increasing diameter of metering roller, setting 2 or 4 seed cells on metering roller, adding seed discharging lid and its driving cam mechanism. Through performance tests for prototype and the current seed metering device, number of seeds in a hill, planting space and its error ratio, coefficient of variation of planting space (planting accuracy), and seeding length of $90\%$ of seeds in a hill divided by planting space (planting precision) at setting planting spaces of 15, and 20cm, seeding heights of 10, and 20cm, and seeding speeds of 0.1, 0.2, and 0.5m/s were investigated. Prototype showed better seed planting performance than the current seed metering devices. When setting planting space of 15 cm and seeding height of 10cm, prototype with 2 seed cells showed that variations of planting space and seeding lengths of $90\%$ of seeds in a hill at up to seeding speed of 0.5m/s were within 0.9cm, and 3.6cm, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.287-293
• /
• 1987

To find out the effects of seed maturity and seeding rate of two planting times on the seed emergence and silage and seed yields of rye, a local variety 'Paldanghomir' harvested 30 and 45 days after heading(DAH) were planted at five seeding rates on October(optimum) and November(late) in 1985. At the optimum planting, number of seedlings per unit area and number of tillers per plant were affected by seeding rate, but not by the seed maturities. However, at the late planting, number of seedlings per unit area and number of tillers per plant wer higher in the seed harvested 45 DAH, and they were not correlated with seeding rate in both seeds harvested 30 and 45 DAH. Heading date was 2 or 3 days earlier in the seeds harvested 45 DAH in both planting times. Silage yield was higher at the optimum planting and increased as seeding rate increased in both planting times. Number of spike and 1000~seed weight were higher at the optimum planting than late planting and higher in the seed harvested 45 DAH than 30 DAH in late planting, but were not different among seeding rates. Seed yield at optimum planting showed no difference between seed maturities and among seeding rates, and recommandable seeding rate was 600 seeds per $m^2$. At late planting the seed yield of the seed harvested 45 DAH in the seeding rate over 750 seeds per $m^2$ approached to the yield of the optimum planting. The seed harvested 30 DAH was unstable because of extremely low emergence rate and yield even at the higher seeding rate in late planting. planting.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.2
• /
• pp.51-57
• /
• 1999

Planting methods of seeding, seed net, sprig net and sprigging were evaluated for influence on the covering rate and the growth of Phragmites spp. The results were as follows. 1. Covering rate was high within 4 months when propagated by sprig net, seeding and sprigging but became same within 5 months afterwards regardless of Planting methods. 2. Growth of leaf height and width was high on vegetative types of Planting methods such as sprig net and sprigging when compared with on seed types of Planting methods such as seeding and seed net. 3. Sprig net showed good covering rate and growth than sprigging when compared within vegetative types of planting. 4. In this study, sprig net was figured out as the best type of Planting methods than any other types of Planting methods for the restoration of a shore vegetation in a urban stream.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.1
• /
• pp.44-51
• /
• 1995

This investigation was conducted to determine the effect of the optimum planting date and place for good seed production on growth variation, grain yields, different of variety, infection of seed by fungi, and seed germination and vigor after room storage. Early maturity Korean soybean variety, Keunolkong, and introduced vegetable soybean variety, Fukura-edamame, were planted at field of YAES. and high cool land of Sajapyong in Milyang（altitude, 850m） on May 15 （early）, June 15 （mid.）, and July 15 （late） in 1991. The emergence and vegetative period gradually increased in the early planting date. The grain yield, seed weight, pod number, healthy grain yield also increased when Keunolkong was planted on early date. The healthy seed rate, Keunolkong increased in the early planting date, whereas that of Fukura also increased in the late planting date. Infection ratio of grain to phomopsis seed decay （Phomopsis spp. ' Diaporthe phaseolorum） in Fukura steadily increased in the early planting date. Infection ratio of grain to purple seed stain （Cercospora kikuchii） generally increased in the mid and late planting date. The seed germination and seedling vigor after room storage from five to six months gradually increased in the late planting date. And seed germination of Fukura rapidly decreased in the early planting date. Therefore, the optimum planting date for good seed production in early maturity vegetable soybean was June 15 in terms of harvesting time avoid a high temprature and humidity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.2
• /
• pp.97-102
• /
• 2000

This experiment was conducted to investigate the changes of harvest index and the relationship between harvest index and yield determination factors by different planting times in the determinate soybean cultivars, Shinpaldal and Danbaeg. Optimum planting were 23 May in 1995 and 1996. Late planting were 13 June in 1995 and 6 June in 1996. Growth period from planting to physiological maturity (R7) was shortened as planting time was delayed in two cultivars due to shortening of reproductive growth period in Shinpaldal, and of vegetative growth period in Danbaeg. Stem weight was distinctly decreased in late planting compared to optimum planting, but seed weight of both cultivars was not different between planting times. Also, seed number per pod and harvest index were significantly increased in late planting and the high correlation was found between two factors. It was suggested that increase of harvest index in late planting would be related with high assimilate use efficiency due to increase of sink capacity. The results of correlation and principal component analysis for yield determination factors showed that main factor on yield determination was pod number per plant at R5 stage associated with dry matter accumulation during early reproductive growth period, seed number per pod and harvest index were the second factor, and one hundred seed weight was the third factor. The result of this experiment indicated that yield determination in soy-bean was dependent mainly on pod number per plant related to dry matter accumulation by early reproductive growth period, and the increase of seed number per pod and harvest index could compensate for yield decrease by shortening of vegetative growth period in late planting. Such result suggests that optimum planting date can be delayed from mid May to early June in improved soybean cultivars in Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.1
• /
• pp.44-48
• /
• 1998

Two determinate soybean cultivars, 'Baegunkong' and 'Namhaekong', were planted on 8 Jone, 23 June, and 8 July 1996 at Cheju at planting densities of 33, 43, 53, 63 plants per $m^2$ to determine the optimum planting density of double crop soybean for recently recommended cultivars in Cheju area at various planting dates. The plant height, and the diameter and node number of main stems decreased as planting was delayed. The plant height increased but the stem diameter and node number decreased with increasing planting density. Pod number per plant was greater for Namhaekong than for Baegunkong and was not affected by planting date. Pod number per plant decreased but pod numbers per $\textrm{m}^2$ increased with increasing planting density. The number of seeds per pod was greater at the two later plantings and fewer at the highest planting density. 100-seed weight decreased with delaying planting. The seed weight was lighter at the highest planting density for Baegunkong but there was no difference for Namhaekong among the planting densities. The seed yield of Baegunkong was greater for 23 June and 8 July plantings (2,280 and 2,420 kg/ha) than for 8 June planting (1,450 kg/ha) while that of Namhaekong was greatest at 23 June planting (2,690 kg/ha) compared with 8 June and 8 July plantings (1,890 and 2,080 kg/ha). Across the planting dates and cultivars, seed yield increased from 1,860 to 2,290kg/ha as the planting density increased from 33 to 53 plants/$\textrm{m}^2$ and then leveled off with a further increase in planting density.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.8 no.1
• /
• pp.91-97
• /
• 1970

It is one of the important subjects in fall crop production of potatoes in korea to find the proper direct planting method as a substitute for transplanting method by sprouting inducement at seed-bed. From this point the author has undertaken this experiments to examine the effects of several handling methods of seed tuber pieces at planting on sprouting of fall grown potatoes at Ansung Agricultural College from August to september in 1969. The results of experiments induced sprouting with Gibberellin treatment using the variety Irish Cobbler were as follows; 1. Sun light exposure treatment to cut surface of potato seed pieces resulted in rotting of seed pieces and delay of sprouting and bud growth. Exposure more than three hours induced severe rotting(more than fifty percent) of seed pieces (Table I). 2. When soil moisture are abundant and the duration of sun light. exposure is short, even direct planting method of treated seed pieces with Gibberellin resulted in good potato stands (Table 2). 3. The direct planting method, as the rotting of seed pieces are avoidable are applicable in fall crop production of potatoes us a substitute for transplanting method because the sprouting and bud growth are promoted more in case of direct planting than transplanting (Table 3). 4. When the humidity in the bottle was low no healing effects was found by holding the seed pieces in large closed bottle under the trees for three days before planting (Table 2). 5. If duration of sunlight exposure is short, no difference of potato stands between clear day planting and cloudy day plant ing (Table 3). 6. As long as soil moisture deficiency. was not induced the irrigation at planting shows no effects to protect the seed piece rotting after planting (Table 3).

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.761-767
• /
• 1993

A precision planting system using computer controlled technology for mulching cultivation was developed and tested . The system consisting of a micro-computer, several optical fiber sensors and control actuators realized the mechanization of the precision planting operation. The film hole positions, existences of a seed on shutter were detected and the planting speed was measured. The shutter opening mechanism and a seed metering device driven by a stepping motor were controlled, automatically . The planting timing of the shutter opening mechanism were analyzed from a video camera motion analysis, theoretically. The results showed a sufficient accuracy of a seed planted into the center a film hole with a variety of planting speeded. The gravity point positions in film hole of seeds planted by the system just were within the area of +-5mm of the hole center when the hole diameter was 40mm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.201-206
• /
• 1999

For the mass production of plug seedlings in cultivar ‘Dejima’ potato (Solanum tuberosum L.) the optimal apical cutting diameter for rooting and rapid multiplication of stem cuttings in hydroponics were determined. In addition, the best planting date was predicted to increase tuber yield of plug seedlings at fall cropping in Cheju-Do, Korea. Days to initial rooting decreased as the cutting diameter was reduced. Plant height, leaf number, root length and root weight per plant were favorable as the cutting diameter was small. The ideal cutting diameter was 1-2 mm in this experiment. In the hydroponic cultures, the Japanese standard (JS) nutrient solution was the most effective for multiplication of stem cuttings. It was able to propagate more than 20 times a month from a single mother plant. Viability of plants, which were derived from plug seedlings using stem cuttings, was excellent when transplanted to the field. The number of tubers and tuber yield in both of the plug seedlings and seed potato planting plots were high when planted on 25 August. The number and yield were reduced when planted on 15 August, 5 September and 15 September. The degree of decrease of tuber yield in the plug seedling planting plot however, was lower than that of seed potatoes when the planting date was late. In the case of small tubers (under 30 g), the number of tubers and tuber yield were evidently increased in the seed potato tuber planting plot; the yield of large tuber (over 80g) in the plug seedling planting plot was higher than that of the seed potato. The total tuber yield per plant in the plug seedling planting plot was less than that of the seed potato; therefore, in order to increase tuber yield it was necessary to increase field plant density.