• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.87-92
• /
• 1989

We fabricated primary and secondary seed grains. Primary seed grains having larger grain size were obtained under the conditions that were 2.0m/o BaCO$_3$ and 10 hours sintering. The amount of primary seed grain to yield the largest secondary seed grains were choosed as 3 w/o and we fabricated the low voltage varistors which were joined the low voltage-oriented ZnO varistor system made by conventional method with the secondary seed grains. As a result, ZnO varistor showed appoximately 10V/mm of nonlinear resistance and 15-22 of nonlinear exponent.

• 한국세라믹학회지
• /
• 제35권1호
• /
• pp.66-78
• /
• 1998

the microstructure and mechanical properties of seeded and ball-milled dry gels prepared by boehmite sol-gel method were discussed. The densification of seeded gels was improved with increasing seed content namely the number of seed The number of seed was 1.09, 3.35, 5.72${\times}$1012/cm3 boehmite when seeded with 1, 3, 5wt% respectively The ball milled gel contained about 0.5wt% seed and the number of seed was 4.72${\times}$1012/cm3 boehmite. The sintered density of 5wt% seeded gel was below 80% when sintered at 1300$^{\circ}C$ for 1h. On the other hand that of ball milled gel was very improved and reached to 97% In the case of 3wt% seeded gels the density over 97% was attained when sintered at 1500$^{\circ}C$for 1h. and the grain of the sintered body was several micrometers in size. However the sintered body of ball milled gel showed grain size of submicrometer when sintered at 1300$^{\circ}C$ for 1h. And this specimen showed highest harness value of 1900kg/mm2 The fracture toughness increased with increasing sintering temperature. The sintered body of ball milled gel showed the largest grain size and the highest fracture toughness without regard to sint-ering temperature.

• 농업과학연구
• /
• 제16권2호
• /
• pp.138-151
• /
• 1989

In order to find the effects of seed size on the early seedling growth and yield of soybean, three soybean cultivars in Korea were investigated. Seed size was classified into large and small according to the weight and planted in pots(1/5000a) and in the field. Three soybean cultivars respresenting large, medium and small grains were Hwangkeum-kong, Kwangkyo and Bangsa-kong respectively. These cultivars were planted on June 20, 1987. 1. The plant height, stem diameter, root length and leaf area index(LAI) of the seed with large size seemed larger than the seed with small size regardless of cultivars. 2. The fresh and dry weight were different depending upon the grain sizes. The large grain had heavier fresh and dry weight than the small grains. 3. The protein consumption rate of the cotyledon of Bangsa-kong with small grain size was faster than the Hwangkeum-kong with large grain size. 4. The stem length, stem diameter and number of main stem node of the seed with large size seemed larger than the seed with small size. Large grains of Hwangkeum-kong were the highest in the number of branch node and number of node. 5. The number of pods and grains per plant of Bangsa-kong with small grain size was larger than the Kwangkyo with large grain size. 6. The yield per 10a for Hwangkeum-kong, Hwangkyo and Bangsa-kong were 226.3kg, 193.0kg and 192.8kg, respectively and they were all statistically different. The yield increases of large grains over small grains in the Hwangkeum-kong, Kwangkyo, and Bangsa-kong were 7.4%, 8.0% and 9.2%, respectively.

• 한국유기농업학회지
• /
• 제19권4호
• /
• pp.513-528
• /
• 2011

This study was conducted to evaluate the nutritional value of locally produced organic agricultural by-products to substitute imported organic feeds for organic ruminant farming. Imported organic feeds (corn grain, soybean meal, soybean seed, oat grain, barley grain, wheat grain, buckwheat, sunflower seed meal) and byproducts (rice bran, grape seed meal, rice straw, soybean hull, soybean curd, rice hull, green kernel rice, and crushed rice grain) were analyzed for chemical composition and NDF, ADF, mineral, and amino acid contents and anti-nutritional factors. Dry matter, NDF and ADF contents in organic feeds were higher than those in conventional feeds. Especially, the 9.65% fat content of organic soybean meal was 6 times higher than the 1.95% fat content of conventional soybean meal. Fat contents of rice bran, grape seed meal, green kernel rice, and crushed rice grain were 25.66, 6.09, 3.57 and 1.59%, respectively. Protein contents of soybean hull and soybean curd were 14.68 and 19.87%, respectively, which are highest among organic by-products. Levels of aflatoxin in all feeds were below the safety level. Therefore, organic rice bran, green kernel rice and crushed rice as energy source, and soybean hull and soybean curd as protein source could partial replace imported feeds for organic ruminant farming.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.248-252
• /
• 1995

In this paper, the samples are made by the new three-composition seed grain method, in order to obtain the low voltage varistor distributed randomly large seed grain in its bulk. The oscillation phenomena of carriers appeared from current-voltage characteristics under knee voltage is shown by the transient flow of non trapped carriers group in the trap level of intergranular layer, surface state and/or depletion layer. Current oscillation phenomena is hardly shown in the high electric field. The injected carriers from both electrodes are directly flowed from the conduction band of forward biased grain through the intergranular layer into the reverse biased grain, because the trap level in the electric field above the knee voltage is mostly filled.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.328-331
• /
• 2000

The effect of the constituent elements and their composition of the seed layer on the properties of the evaporated Zn thin films was investigated. It was carried out by the analysis of the preferred orientation and the grain size, and the corrosion characteristics. Seed layers were prepared by evaporation of Al and AlCu respectively, and here the Cu content as additives of the source materials of seed layers were designed 5 a/o to 20 a/o. The values of full width at half maximum (FWHM) of the (002) x-ray diffraction peaks of Zn decreased by increasing the amount of the additives on Al seed layer, as a results, the grain sizes also decreased. In order to characteristics of Zn thin films evaporated on the various seed layers, electrical resistivity changes with a function of time at the temperature of 40$^{\circ}C$ and the relative humidity of 80%, as a result, the relative resistivity changes were increased by decreasing the grain size and the FWHM values of (002) peaks of Zn.

• 한국작물학회지
• /
• 제40권1호
• /
• pp.44-51
• /
• 1995

도입에 의존하고 있는 풋콩 종자 생산체계를 확립하고자 조숙성 품종인 큰올콩과 풋콩 도입풍종인 Fukura 피두를 평야지（영남농업시험장） 및 고랭지（경남 밀양군, 사자평 ：해발 850m）에 파종시기（5월 15일, 6월 15일, 7월 15일）를 달리하여 생육 및 수량과 병해립 및 저장후 발아력을 조사한 결과를 요약하면 다음과 같다. 1. 파종시기가 빠를수록 협수가 많고 100립종은 무거웠으며 수량도 높았다. 재배지별로는 평야지가 고랭지보다 증수되었고, 큰올콩이 Fukura보다 수량성이 높았다. 2. 남부지방의 산간 고랭지는 평야지에 비해 생육 및 100립종이 저하하고 수량성이 크게 떨어져 평야지보다 불리하였다. 3. 안전립 수량은 파종시기가 빠를수록 높고, 평야지 및 큰올콩품종에서 증수되었으며, 전체 립종에 대한 안전립 비율은 고랭지에서 높게 나타났다. 4. 파종시기에 따른 병해정도는 큰올콩은 뚜렷한 차이가 없었으나 Fukura는 파종기가 빠를수록 나병립율이 높았고, 미이라병은 파종기가 빠를수록 심하게 발생하였으며 자정병은 파종기가 늦을수록 많이 발생하는 경향이었다. 5. 종자의 발아율은 파종기가 늦은 것이 높았으며, 5월 15일에 파종하여 수확ㆍ저장한 종자의 발아율은 매우 낮아 문제시 되었다. 따라서 풋콩 종자생육을 위한 적정파종시기는 수파기의 고온ㆍ다습한 환경을 고려하여 6월 중순경이 좋을것으로 생각되었다.

• 한국작물학회지
• /
• 제51권4호
• /
• pp.269-273
• /
• 2006

Multiple linear regression analysis was conducted to interpretate the relationship between sesame grain yield and its components under early sowing cropping condition. The t test showed that stem length, number of capsules per plant, 1000 seeds weight and seed weight per plant gave significant contribution to sesame grain yield, therefore those variables were assumed to mostly influenced components to grain yield of sesame. In the stepwise regression analysis, the predicted equation for sesame grain yield per square meter (Y) was Y = -7.900 + 0.150X1 + 0.461X5 + 15.553X6 + 8.543X7. Meanwhile, F value showed that stem length, number of capsules per plant and seed weight per plant gave significant contribution to sesame grain yield, while 1000 seeds weight did not significantly show. Based on the results, it is reasonable to assume that high yield. potential of sesame under early sowing cropping condition would be obtained by selecting breeding lines with long stem length, number of capsules per plant, and seed weight per plant, which was different result at the late sowing cropping condition in which days to flowering and maturity were assumed to be more affected factors to the sesame grain yield.

• 한국작물학회지
• /
• 제41권6호
• /
• pp.656-664
• /
• 1996

광산, 진주와 밀양에서 수확된 사천006, 두산12 호와 두산2002 종자를 인위노화시켜 종자세를 조절하였다. 이들 종자로서 표준발아검사(standard germination test), 저온발아검사(cold germi-nation test), 전기전도도검사(electroconductivity test)와 Tetrazolium 검사(TZ vigor test)를 실시하여 포장출아율 및 수량과의 관계를 구명하고자 하였다. 9가지 seed lot을 이용한 맥주보리의 포장출아율 예측에는 표준발아검사에서의 발아율만으로 65%의 예측효과가 인정되었고 표준발아검사에서의 유묘세와 저온발아검사에서의 유묘세와 발아율 parameter 또한 효과적인 방법임을 다중회귀분석으로 알 수 있었다. 수량 예측에는 TZ검사에서의 종자세 지수와 표준발아검사에서의 발아율과 TZ검사에서의 예측발아율이 효과적 인 parameter임을 알 수 있었다.

• 한국세라믹학회지
• /
• 제36권12호
• /
• pp.1316-1321
• /
• 1999