• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.189-199
• /
• 2006

This paper presents a field study of the stability of slope collapsed during road construction and proposes a reasonable countermeasure if the current slope is unstable. As a result of slope investigation, it was found that the slope includes five tension cracks and the sliding surface is started from the tension crack and propagated the surface soil layer through weathered rock layer. The slope stability analyses are conducted in case of dry and rainfall seasons. The results indicate that the slope is unstable status. A reinforcement method of slope failure should be selected according to the scale of failure. That is, the scale of slope failure, which is classified small, middle and large size determines the reinforcement method of slope. Since the slope interested in this study is large size failure slope, the reinforcement method to control slope failure is selected stabilizing piles, and seed spray and drainage of surface waterare also selected to remain the factor of safety. The SLOPILE (Ver. 3.0) program is applied in order to do stability analysis of slope reinforced by piles. As the result of analysis, the slope reinforced by a row of piles shows the stable state. It is clearly confirmed that the stabilizing of piles can improve the stability of slope.

• Korean Journal of Environment and Ecology
• /
• v.36 no.5
• /
• pp.507-524
• /
• 2022

In this study, we revealed the location environment and community structural characteristics after extensively investigating Korea's warm-temperate island areas and categorizing vegetation through TWINSPAN analysis. Based on it, this study aims to suggest the direction of the vegetation restoration plan for warm-temperate forests by deriving a restoration strategy for each vegetation type. The vegetation types were clearly divided into eight types, and communities I through IV were good evergreen broad-leaved forests dominated by Machilus thunbergii and Castanopsis sieboldii. On the other hand, communities V through VIII were Pinus thunbergii forest, deciduous broad-leaved forest, and artificial forest, and retrogressive succession vegetation in the warm-temperate areas. The environmental factors derived from the DCA analysis were altitude (average temperature of the coldest month) and distance from the coastline (salt tolerance). The distribution pattern of warm-temperate forests has been categorized into M. thunbergii, C. sieboldii and Cyclobalanopsis spp. forest types according to the two environmental factors. It is reasonable to apply the three vegetation types as restoration target vegetation considering the location environment of the restoration target site. In communities V through VIII, P. thunbergiiand deciduous broad-leaved formed a canopy layer, and evergreen broad-leaved species with strong seed expansion frequently appeared in the ground layer, raising the possibility of vegetation succession as evergreen broad-leaved forests. The devastated land where forests have disappeared in the island areas is narrow, but vegetation such as P. thunbergii and deciduous broad-leaved forests, which have become a retrogressive succession, forms a large area. The restoration strategy of renewing this area into evergreen, broad-leaved forests should be more effective in realizing carbon neutrality and promoting biodiversity.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.59.1-59.1
• /
• 2010

Aluminum-induced crystallization (AIC) of amorphous silicon (a-Si) is studied with the structure of a glass/Al/$SiO_2$/a-Si, in which the $SiO_2$ layer has micron-sized laser holes in the stack. An oxide layer between aluminum and a-Si thin films plays a significant role in the metal-induced crystallization (MIC) process determining the properties such as grain size and preferential orientation. In our case, the crystallization of a-Si is carried out only through the key hole because the $SiO_2$ layer is substantially thick enough to prevent a-Si from contacting aluminum. The crystal growth is successfully realized toward the only vertical direction, resulting a crystalline silicon grain with a size of $3{\sim}4{\mu}m$ under the hole. Lateral growth seems to be not occurred. For the AIC experiment, the glass/Al/$SiO_2$/a-Si stacks were prepared where an Al layer was deposited on glass substrate by DC sputter, $SiO_2$ and a-Si films by PECVD method, respectively. Prior to the a-Si deposition, a $30{\times}30$ micron-sized hole array with a diameter of $1{\sim}2{\mu}m$ was fabricated utilizing the femtosecond laser pulses to induce the AIC process through the key holes and the prepared workpieces were annealed in a thermal chamber for 2 hours. After heat treatment, the surface morphology, grain size, and crystal orientation of the polycrystalline silicon (pc-Si) film were evaluated by scanning electron microscope, transmission electron microscope, and energy dispersive spectrometer. In conclusion, we observed that the vertical crystal growth was occurred in the case of the crystallization of a-Si with aluminum by the MIC process in a small area. The pc-Si grain grew under the key hole up to a size of $3{\sim}4{\mu}m$ with the workpiece.

• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.329-334
• /
• 2007

Osmotic pellet system, which is one of the oral drug delivery systems, has been developed to improve manufacturing process, reduce product cost and other problems of osmotic tablet systems. Osmotic pellet is consisted of water swellable seed layer, drug layer, and membrane layer. Among them, the membrane layer plays an important role in a control of the drug release. In this work, we examined the effect of ratio for Eudragit RL and RS on the drug release behavior. Osmotic pellet with nifedipine as a model drug was easily obtained in a good yield by fluidized bed coater. Osmotic pellet showed round morphology with a range of size $1300{\sim}1500\;{\mu}m$. In the experiment of nifedipine release, the release amount increased with the increase of the ratio of Eudragit. This is due to the fact that Eudragit RL contains more hydrophilic quaternary ammonium group than Eudragit RS. Additionally, the release amount was retarded with increasing the membrane thickness. There are no differences in the release amount measured at the different pH 1.2, 6.5, 6.8, and 7.2. In conclusion, it was found that the drug release from osmotic pellets depended on the composition ratio and coating thickness of membrane layer.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.3
• /
• pp.176-180
• /
• 2000

The higher sugar and lower starch in super sweet corn may be due to modified endosperm genes sh, bt series, but its seeds have major limiting factors causing low germination and low seedling vigor, This study was conducted to determine what measurable kernel characteristics during the grain tiling period might be more useful as a guide to optimize harvest date for good seed quality in hybrid super sweet corn production. Artificial crossing in super sweet corn hybrid (Chodangok 1) was made on the same day, and ears were harvested from 18 days to 53 days after pollination at weekly intervals. Kernel weight, moisture content, hardness, endosperm rate, seedling height and storage nutrients such as sugars, protein, starch, and germination rate were measured for the kernels at each harvest. Super sweet corn hybrid, Chodangok 1 presented satisfactory germination rate above 70% when harvested on 39 to 46 days after pollination. Its storage nutrients at that time were 23.7-24.2% in starch content 5.5-5.9% in total sugars, 38.9-46.6% in kernel moisture, and 62.7-64.2% in endosperm rate. Germination rate was extremely high when harvested on 39 days after pollination. The black layer of Chodangok 1 could not be used as an indicator for seed harvest. These results suggested that optimum harvest date seems to be 39 days, and kernel moisture and starch content could be used as indications of kernel maturity in deciding when to harvest fer good seed quality in super sweet corn.

• Korean Journal of Food Science and Technology
• /
• v.14 no.3
• /
• pp.219-225
• /
• 1982

Triglycerides of cottonseed oil were separated by thin layer chromatography (TLC), and fractionated by high-performance liquid chromatography (HPLC) on the basis of partition numbers. From each fraction, it was fractionated again on the basis of acyl carbon numbers using gas liquid chromatography (GLC). The fatty acids of triglyceride for each partition number group were analyzed by GLC. From, these results, triglyceride constituents of cotton seed oil were estimated to be 37 kinds of triglycerides. The major triglycerides and their contents in cotton seed oil were as follows: 25.8%$(C_{16:0},\;C_{18:2},\;C_{18:2})$, 15.5%$(C_{18:2},\;C_{18:2},\;C_{18:2})$, 13.8%$(C_{16:0},\;C_{18:2},\;C_{16:0})$, 8.3%$(C_{18:2},\;C_{18:1},\;C_{18:2})$, 6.2%$(C_{18:2},\;C_{18:1},\;C_{18:1})$, 4.1%$(C_{18:1},\;C_{18:1},\;C_{14:0})$, 3.4%$(C_{16:0},\;C_{18:1},\;C_{16:0})$, 2.3%$(C_{18:1},\;C_{18:2},\;C_{16:0})$, 2.2%$(C_{18:1},\;C_{18:1},\;C_{18:1})$, 1.0%$(C_{14:0},\;C_{18:2},\;C_{18:1})$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.3
• /
• pp.75-84
• /
• 1987

Lipids in Bush Clover (Lespedza bicolor) seed were extracted with the mix ture of chloro-form-methanol (2 : 1, v/v) and then fractionated into neutral lipids, glycolipids and phospholipids by silicic acid column chromatography. Components and fatty acid composition of each fraction were determined by thin layer and gas chromatographies. The results were summarized as follows. In Bush Clover seed, the contents of neutral lipids, glycolipids and phospholipids were 71.75%, 23.26% and 4.99% respectively. Triglycerides(61.90%) and free fatty acids(22.04%) were the major components among the neutral lipids. Esterified sterols, free sterols, diglycerides and monoglycerides were the minor components. The major components of glycolipids were monogalactosyl diglycerides(38.19%) the others were esterified steryl glycosides, cerebrosides and digalactosyl diglycerides. The major components of the phospholipids were phosphatidyl cholines(36.46%), phosphatidyl inositols(21.52%) and phosphatidyl ethanolamines(17.29%). The major fatty acid of total lipid, neutral lipids and glycolipids were linoleic acid, linolenic acid, oleic acid and palmitic acid. On the other hand, predominate fatty acid of phospholipids were linoleic acid, palmitic acid, linolenic acid and stearic acid.

• Journal of the Korean Vacuum Society
• /
• v.19 no.2
• /
• pp.128-133
• /
• 2010

ZnO:Al films were deposited by DC-pulsed magnetron sputtering using a two-step process involving the control of the oxygen pressure. The seed layers were prepared with various Ar to oxygen flow ratios and the bulk layers were deposited under pure Ar. As the oxygen pressure during the deposition of the seed layer increased, the crystallinity and degree of (002) texturing increased. The resistivity gradually decreased with increasing crystallinity from $4.7\times10^4\Omega{\cdot}cm$ (no seed) to $3.7\times10^4\Omega{\cdot}cm$ (Ar/$O_2$ = 9/1). The etched surface showed a crater-like structure and an abrupt morphology change appeared as the crystallinity was increased. The sample deposited at an Ar/$O_2$ flow ratio of 9/1 showed a very high haze value of 88% at 500 nm, which was explained by the large feature size of the craters, as shown in the AFM image.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.577-589
• /
• 2021

Soil seed bank community contributes to the long-term conservation of plant diversity and vegetation dynamics, and their decreasing diversity and density with soil depth provide critical perspectives (deterministic and stochastic) for understanding the community disassembly process. We analyzed changes in species composition and diversity and structuring patterns by soil layer (top and bottom), including surface vegetation, in Gwangneung Forest, a mature forest with a vegetation climate in the temperate central part of the Korean Peninsula. From two layers of soil collected with a vertical difference of 10 cm, 934 specimens of 27 families, 40 genera, 44 species, three varieties, and 47 taxa, germinated. Although species diversity and germination density decreased in most comparative characteristics, including growth type, there was no statistical significance due to large deviations. Within-group variability of species composition was similar in the upper and lower soils, as was the decline pattern in co-occurred species (ζ-diversity) and change in species retention probability. The structuring process of the community composition in the two soil layers was fitted with an exponential correlation rather than a power function, demonstrating the dominance of the stochastic process. The pattern in diversity and species turnover according to soil depth in Gwangneung Forest was discovered to be structured by stochastic random events, such as seed vertical movement rather than interaction with trait characteristics.

• Journal of Korean Society of Forest Science
• /
• v.21 no.1
• /
• pp.1-34
• /
• 1974

The author intended to investigate external and internal changes in the cone structure, changes in water content, sugar, fat and protein during the period of seed maturation which bears a proper germinability. The experimental results can be summarized as in the following. 1. Male flowers 1) Pollen-mother cells occur as a mass from late in April to early in May, and form pollen tetrads through meiosis early and middle of May. Pollen with simple nucleus reach maturity late in May. 2) Stamen number of a male flower is almost same as the scale number of cone and is 69-102 stamens. One stamen includes 5800-7300 pollen. 3) The shape is round and elliptical, both of a pollen has air-sac with $80-91{\mu}$ in length, and has cuticlar exine and cellulose intine. 4) Pollen germinate in 68 hours at $25^{\circ}C$ with distilled water of pH 6.0, 2% sugar and 0.8% agar. 2. Female flowers 1) Ovuliferous scales grow rapidly in late April, and differentiation of ovules begins early in May. Embryo-sac-mother cells produce pollen tetrads through meiosis in the middle of May, and flower in late May. 2) The pollinated female flowers show repeated divisions of embryo-sac nucleus, and a great number of free nuclei form a mass for overwintering. Morphogenesis of isolation in the mass structure takes place from the middle of March, and that forms albuminous bodies of aivealus in early May. 3. Formation of pollinators and embryos. 1) Archegonia produce archegonial initial cells in the middle and late April, and pollinators are produced in the late April and late in early May. 2) After pollination, Oespore nuclei are seen to divide in the late May forming a layer of suspensor from the diaphragm in early June and in the middle of June. Thus this happens to show 4 pro-embryos. The organ of embryos begins to differentiate 1 pro-embryo and reachs perfect maturation in late August. 4. The growth of cones 1) In the year of flowering, strobiles grow during the period from the middle of June to the middle of July, and do not grow after the middle of August. Strobiles grow 1.6 times more in length 3.3 times short in diameter and about 22 times more weight than those of female flower in the year of flowering. 2) The cones at the adult stage grow 7 times longer in diameter, 12-15 times shorter diameter than those of strobiles after flowering. 3) Cone has 96-133 scales with the ratio of scale to be 69-80% and the length of cone is 11-13cm. Diameter is 5-8cm with 160-190g weight, and the seed number of it is 90-150 having empty seed ratio of 8-15%. 5. Formation of seed-coats 1) The layers of outer seed-coat become most for the width of $703{\mu}$ in the middle of July. At the adult stage of seed, it becomes $550-580{\mu}$ in size by decreasing moisture content. Then a horny and the cortical tissue of outer coats become differentiated. 2) The outer seed-coat of mature seeds forms epidermal cells of 3-4 layers and the stone cells of 16-21 layers. The interior part of it becomes parenchyma layer of 1 or 2 rows. 3) Inner seed-coat is formed 2 months earlier than the outer seed-coat in the middle of May, having the most width of inner seed-coat $667{\mu}$. At the adult stage it loses to $80-90{\mu}$. 6. Change in moisture content After pollination moisture content becomes gradually increased at the top in the early June and becomes markedly decreased in the middle of August. At the adult stage it shows 43~48% in cone, 23~25% in the outer seed-coat, 32~37% in the inner seed-coat, 23~26% in the inner seed-coat and endosperm and embryo, 21~24% in the embryo and endosperm, 36~40% in the embryos. 7. The content compositions of seed 1) Fat contents become gradually increased after the early May, at the adult stage it occupies 65~85% more fat than walnut and palm. Embryo includes 78.8% fat, and 57.0% fat in endosperm. 2) Sugar content after pollination becomes greatly increased as in the case of reducing sugar, while non-reducing sugar becomes increased in the early June. 3) Crude protein content becomes gradually increased after the early May, and at the adult stage it becomes 48.8%. Endosperm is made up with more protein than embryo. 8. The test of germination The collected optimum period of Pinus koraiensis seeds at an adequate maturity was collected in the early September, and used for the germination test of reduction-method and embryo culture. Seeds were taken at the interval of 7 days from the middle of July to the middle of September for the germination test at germination apparatus.